Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

石英加速度计离心机试验误差系数显著性分析

提出了一种针对石英加速度计精密离心机试验的显著性分析方法.在多位置方法分离加速度计误差系数时,由于激励不足等试验条件的限制,无法保证高次项系数的标定结果正确.离心机试验利用离心机提供的向心加速度作为仪表的输入,能够标定出高次项系数.为了确定被标定的误差系数均具有可信度,有必要对高过载试验结果进行分析,保留可信的误差系数,证明使用的误差模型无误.由于此方法的通用性,在其他试验条件下的误差分离试验中仍可运用.     

改性双基推进剂断裂能下限研究

为获得改性双基推进剂断裂能下限值,使用标准哑铃型试件、紧密拉伸试件和双边切口试件进行了不同拉伸速率下的单轴拉伸实验。实验结果表明:力与位移之间的关系可以反映三种试件失效形式的不同,失效形式决定了推进剂断裂能下限的获取方法。断裂能密度随拉伸速率的增大呈现出先急速上升后缓慢上升最终趋于稳定的过程。紧密拉伸试件和双边切口试件的断裂能密度明显低于标准哑铃型试件;当拉伸速率200mm/min时,紧密拉伸试件的断裂能密度小于双边切口试件,随着拉伸速率的增大,两者的差距越来越小,可将紧密拉伸试件的断裂能密度作为改性双基推进剂断裂能下限;当拉伸速率200mm/min时,紧密拉伸试件和双边切口试件的断裂能密度几乎相等,两种试件获得的断裂能密度均可作为改性双基推进剂断裂能下限。     

基于离散粒子群算法的航空发动机总装工艺优化方法

为了提高航空发动机总装工作的效率与质量,加强对总装工序和总装机件的管控,量化不同总装人员工作任务量,提高发动机总装的一致性和可追溯性,提出了1种发动机总装分区优化方法。以改进的2进制粒子群算法为基础,平衡了发动机总装各区域的工作内容,最小化各总装区域的工作差异,增强了每个区域装配机件的关联度,提高了总装工作的并行度,从而提高了装配质量。以某型发动机总装区域划分工作为实例,通过上述算法进行了总装区域划分,量化了所有装配区域每一工序的具体装配内容,减小了不同装配区域间的机件差异,杜绝了缺件、剩件等装配问题。     

突加不平衡下GTF发动机转子系统瞬态响应分析

针对GTF发动机低压转子系统突加不平衡瞬态响应问题,基于有限元法建立了考虑啮合单元、行星架单元、膜盘联轴器单元的多体接触、多转子耦合动力学模型,介绍了考虑非线性因素下突加不平衡瞬态响应计算方法,求解了低压转子系统的突加不平衡瞬态响应,并分析了关键部件刚度对突加不平衡的影响规律。结果表明：当风扇转子发生突加不平衡时,各部件均表现为振动幅值突增,后迅速趋于稳定,低压涡轮转子发生明显拍振,突加不平衡载荷主要由行星架结构和第1.5支点刚性支承承担;行星架刚度主要影响风扇转子突加不平衡响应、第1.5支点和行星架处的外传力;膜盘联轴器刚度主要影响增压级突加不平衡响应、转子在突加不平衡之后稳定运转情况。     

绿色技术创新对企业成长绩效的影响——基于研发投入强度的调节作用

随着我国经济的高速发展,生态问题日渐凸显.通过技术创新处理好经济发展和生态效益的关系成为实现绿色发展的内在要求.本文利用94家创业板制造业上市公司2014-2017年的数据,采用广义最小二乘法对绿色技术创新、研发投入强度与企业成长绩效之间的关系进行实证分析,探讨了绿色技术创新对企业成长绩效的直接影响,并对研发投入强度的...     

A review of topology optimization for additive manufacturing: Status and challenges

Topology optimization was developed as an advanced structural design methodology to generate innovative lightweight and high-performance configurations that are difficult to obtain with conventional ideas. Additive manufacturing is an advanced manufacturing technique building as-designed structures via layer-by-layer joining material, providing an alternative pattern for complex components. The integration of topology optimization and additive manufacturing can make the most of their advantages and potentials, and has wide application prospects in modern manufacturing. This article reviews the main content and applications of the research on the integration of topology optimization and additive manufacturing in recent years, including multi-scale or hierarchical structural optimization design and topology optimization considering additive manufacturing constraints. Meanwhile, some challenges of structural design approaches for additive manufacturing are discussed, such as the performance characterization and scale effects of additively manufactured lattice structures, the anisotropy and fatigue performance of additively manufactured material, and additively manufactured functionally graded material issues, etc. It is shown that in the research of topology optimization for additive manufacturing, the integration of material, structure, process and performance is important to pursue high-performance, multi-functional and lightweight production. This article provides a reference for further related research and aerospace applications.     

带攻角约束的高超声速飞行器自适应反步控制器设计

针对带攻角(AOA)约束的高超声速飞行器控制问题,提出一种基于非对称时变障碍函数的非线性自适应反步控制方法。首先,将飞行器模型化为严反馈形式,以反步法为基础进行控制器设计。然后通过光滑饱和函数对名义攻角指令信号进行限幅,并保证限幅信号的可导性,限幅产生的误差通过设计辅助系统进行补偿。进而使用障碍函数对攻角指令跟踪误差进行非对称时变约束。针对不确定性和干扰,设计新型自适应律对集中干扰上界进行估计并补偿。最终通过Lyapunov理论证明了闭环系统状态量一致最终有界并且攻角始终满足时变约束。仿真结果表明,本文方法能够在满足攻角约束基础上保证良好跟踪性能。