新媒体视域下系统构建“三位一体”公寓管理模式

随着科技日益进步和5G时代的即将到来,在治理体系上越来越注重管理与哲学教育相结合,高校作为接收新事物、新思维的前沿阵地。学生公寓成为大学生思想政治教育的又一个重要的阵地,因此创新公寓管理体系并努力做到使之与哲学相结合也成为了一项重大任务,高校辅导员、公寓辅导员、高校后勤管理人员结合新媒体创新学生公寓的管理方式对新时代大学生的教育、管理、服务掌控和开展思想政治教育工作至关重要。     

高温声表面波器件Pt电极的制备研究*

针对高温声表面波(SAW)器件中的Pt电极制备需求,采用电感耦合等离子体干法刻蚀工艺实现Pt电极的干法刻蚀。通过采用纯Ar气源,研究不同ICP功率/RF功率下Pt电极的刻蚀,采用优化的刻蚀参数实现SAW中Pt叉指电极的制备。针对Pt溅射刻蚀中出现的再沉积问题,分析沉积物对电极制备的影响,通过后处理实现沉积物的去除,实现高温SAW器件的制备。     

Simulation and analysis of chemical release in the ionosphere

Ionospheric inhomogeneous plasma produced by single point chemical release has simple space-time structure, and cannot impact radio wave frequencies higher than Very High Frequency (VHF) band. In order to produce more complicated ionospheric plasma perturbation structure and trigger instabilities phenomena, multiple-point chemical release scheme is presented in this paper. The effects of chemical release on low latitude ionospheric plasma are estimated by linear instability growth rate theory that high growth rate represents high irregularities, ionospheric scintillation occurrence probability and high scintillation intension in scintillation duration. The amplitude scintillations and the phase scintillations of 150?MHz, 400?MHz, and 1000?MHz are calculated based on the theory of multiple phase screen (MPS), when they propagate through the disturbed area.     

Application of small-size antennas for estimation of angles of arrival of HF signals scattered by ionospheric irregularities

A modification of the Doppler Interferometry Technique is suggested to enable estimating angles of arrival of comparatively broadband HF signals scattered by random irregularities of the ionospheric plasma with the use of small-size weakly directional antennas. The technique is based on the measurements of cross-spectra phases of the probe radiation recorded at least in three spatially separated points. The developed algorithm has been used to investigate the angular and frequency-time characteristics of HF signals propagating at frequencies above the maximum usable one (MUF) for the direct radio path Moscow-Kharkiv. The received signal spectra show presence of three families of spatial components attributed, respectively, to scattering by plasma irregularities near the middle point of the radio path, ground backscatter signals and scattering of the sounding signals by the intense plasma turbulence associated with auroral activations. It has been shown that the regions responsible for the formation of the third family components are located well inside the auroral oval. The drift velocity and direction of the auroral ionosphere plasma have been determined. The obtained estimates are consistent with the classical conception of the ionospheric plasma convection at high latitudes and do not contradict the results of investigations of the auroral ionosphere dynamics using the SuperDARN network.     

Disturbance observer based model predictive control for accurate atmospheric entry of spacecraft

Facing the complex aerodynamic environment of Mars atmosphere, a composite atmospheric entry trajectory tracking strategy is investigated in this paper. External disturbances, initial states uncertainties and aerodynamic parameters uncertainties are the main problems. The composite strategy is designed to solve these problems and improve the accuracy of Mars atmospheric entry. This strategy includes a model predictive control for optimized trajectory tracking performance, as well as a disturbance observer based feedforward compensation for external disturbances and uncertainties attenuation. 500-run Monte Carlo simulations show that the proposed composite control scheme achieves more precise Mars atmospheric entry (3.8?km parachute deployment point distribution error) than the baseline control scheme (8.4?km) and integral control scheme (5.8?km).     

伺服机构负载模拟系统设计与动态特性分析

针对火箭发动机喷管伺服机构的负载模拟问题,采用机械的方式,设计了一种可对伺服机构的惯性负载、摩擦力矩负载、弹性力矩负载、安装刚度以及发动机喷管柔性特征进行模拟的负载模拟器,并建立了模拟器和伺服机构数学模型。仿真分析了惯性负载、弹性力矩以及喷管柔性对伺服机构负载多自由度特性的影响。通过对伺服机构扫频实验,负载模拟器中的负载在一定范围内调节,可复现伺服机构实际工作中的动态特性。说明该负载模拟器结构设计合理,从而为具有多自由度特性的火箭伺服机构的负载模拟系统设计提供参考。该系统已经得到实际应用。     

基于嵌入式MATLAB函数编程的火星车能量平衡仿真系统

在以往航天器研制过程中,电源系统能量平衡分析是基于表格化计算的方法,其运算效率低、显示不直观。文章提出了一种可视性强、易编程、更通用的能量平衡分析方法,即采用嵌入式MATLAB函数对电源系统能量平衡分析的功能模块进行编程实现,以火星车电源系统为应用背景,在MATLAB/SIMULINK平台上搭建了一套用于能量平衡分析的仿真系统,并在特定实例下进行仿真分析,仿真结果采用图表曲线形式显示,能清晰、直观地反映能源利用的动态变化趋势,可为电源系统方案优化设计提供参考依据。     

Study on O2 generation and CO2 absorption capability of four co-cultured salad plants in an enclosed system

The ability to generate O₂ and absorb CO₂ of several co-cultured vegetable plants in an enclosed system was studied to provide theoretical reference for the future man-plant integrated tests. Four kinds of salad plants (Lactuca sativa L. var. Dasusheng, Lactuca sativa L. var. Youmaicai, Gynura bicolor and Cichorium endivia L.) were grown in the CELSS Integration Test Platform (CITP). The environmental factors including O₂ and CO₂ concentration were continuously monitored on-line and the plant biomass was measured at the end of the test. The changing rules of O₂ and CO₂ concentration in the system were basically understood and it was found that the O₂ generated by the plants could satisfy the respiratory needs of 1.75 persons by calculation. It was also found that the plants could absorb the CO₂ breathed out by 2 persons when the light intensity was raised to 550 mmol m⁻² s⁻¹ PPF. The results showed that the co-cultured plants hold good compatibility and excellent O₂-generating and CO₂-absorbing capability. They could also supply some fresh edible vegetable for a 2-person crew.     

3PRS/UPS冗余驱动并联机器人刚度特性分布

设计提出了一种采用冗余驱动的3PRS/UPS三自由度并联机器人,并建立分析其机构模型.基于螺旋理论,对并联机器人进行运动学分析,通过分别针对机构的驱动和约束建立了雅可比矩阵,最后整合建立了包含冗余驱动在内的全雅可比矩阵.利用虚功原理,结合并联机器人驱动副和约束副的柔度影响,推导得出了机构全刚度矩阵.同时,分析了机构在给定静载荷条件下的变形情况,总结出机构的空间变形分布规律.使用刚度矩阵的最小、最大特征值和运动刚度指标（KSI,Kinematic Stiffness Index）为机构刚度评价指标,对比和分析了引入冗余驱动前后对并联机器人刚度特性分布的影响,得出冗余驱动支链的引入可提高并联机器人特定方向的刚度和改善刚度分布的结论,为冗余驱动并联机器人优化设计和开发应用奠定基础.      

基于遗传算法的双余度无刷直流电机优化设计

针对航空电作动系统用双余度无刷直流电机的方案寻优问题,提出了一种基于遗传算法的优化设计方法.通过分析航空作动系统的特点和性能要求得出电机优化设计的目标函数和约束条件.建立电机的电磁和热路模型,得到目标函数和约束条件的解析方程.其中,在电磁模型的建立过程中,采用解析方法得到气隙磁密和反电势系数表达式;在热路模型的建立过程中,采用Bertotti分立铁耗法计算铁心损耗,并利用热路法求解电机各部分的温升.通过遗传算法对电机重量全局寻优.计算结果表明:在满足性能要求的前提下,优化设计方案合理,电机重量减小了13.3%,验证了该优化设计和建模方法的有效性.