A New D-GCL for Unidirectional Motion with Large Displacement

Numerical simulations of unsteady flow problems with moving boundaries commonly require the use of geometric conservation law(GCL).However,in cases of unidirectional large mesh deformation,the cumulative error caused by the discrete procedure in GCL can significantly increase,and a direct consequence is that the calculated cell volume may become negative.To control the cumulative error,a new discrete GCL(D-GCL)is proposed.Unlike the original D-GCL,the proposed method uses the control volume analytically evaluated according to the grid motion at the time level n,instead of using the calculated value from the D-GCL itself.Error analysis indicates that the truncation error of the numerical scheme is guaranteed to be the same order as that obtained from the original D-GCL,while the accumulated error is greatly reduced.For validation,two challenging large deformation cases including a rotating circular cylinder case and a descending GAW-(1)two-element airfoil case are selected to be investigated.Good agreements are found between the calculated results and some other literature data,demonstrating the feasibility of the proposed D-GCL for unidirectional motions with large displacements.     

多星多普勒频率变化率无源定位方法

针对多星时差频差定位系统时/频同步要求高、多星测向定位系统复杂等问题,提出一种多星多普勒频率变化率的无源定位体制,每颗卫星仅需单个接收天线和通道,且多星之间无需高精度时/频同步。针对定位观测量与辐射源位置的高度非线性,提出一种基于多普勒频率的多假设非线性最小二乘(MH-NLS)无源定位算法。理论推导了定位估计的克拉美-罗下限(CRLB),基于定位误差的几何分布(GDOP)分析了多星构型对定位误差的影响。计算机仿真分析表明,基于多普勒频率变化率的MH-NLS算法得到的定位误差能够达到CRLB。     

电容式多次放电点火系统设计与试验

针对某型二冲程点燃式空气辅助缸内直喷发动机燃用柴油问题,提出了实现单电容连续多次放电点火的方法,研制了直流电容式多次放电点火模块,进行了多次点火功能性验证及点火能量测试.在此基础上,进行了环境温度为6℃下的冷起动试验及3000r/min小负荷性能试验,结果表明:在该环境条件下,采用5次放电点火策略能够使发动机起动成功,在小负荷工况下,增加点火次数有利于改善缸内燃烧,点火提前角在10°~20°之间时,4次点火对发动机动力性、燃油消耗率及排放性能改善比2次点火更明显,当点火提前角提前至30°后,其改善作用逐渐减小.      

临近空间高超声速目标滑跃式轨迹Sine-AIMM跟踪算法

针对单一的Sine模型算法无法与临近空间高超声速目标滑跃式轨迹准确匹配,现有的交互多模型(IMM)算法跟踪效果也不够理想的问题,提出一种基于多重贝叶斯准则的自适应交互式多Sine模型(Sine-AIMM)临近空间高超声速滑跃式目标跟踪算法.算法采用多个Sine模型对滑跃式轨迹进行匹配,并利用多重贝叶斯准则在线调整各模型...     

考虑配平特性的超声速客机低声爆气动布局优化研究

降低声爆水平是下一代超声速运输机研制需要解决的关键问题之一。低声爆优化通常使飞行器布局向着机翼后掠角增大、机翼沿机身方向分布范围增大的趋势发展,给飞行器的配平和低速特性带来不利影响。以某超声速客机基本构型为研究对象,建立基于类别/形状函数的翼身组合体参数化建模方法;基于超声速线化理论分析外形几何参数对声爆水平的影响。在此基础上,分别针对机身轮廓、机翼平面形状以及扭转角分布对该构型进行低声爆优化和俯仰力矩特性优化,并采用CFD 方法对优化结果进行校核。结果表明：与基准构型相比,在不显著增加俯仰力矩的基础上,优化构型的阻力降低了19 cts,近场过压显著降低,地面声爆响度降低5.1 PLdB。     

Mining Spatial Associations with Limited Sensory Information

Abstract

Human navigation in an unknown environment requires an understanding of the spatial relationships of the terrain. For example, a soldier who is on a reconnaissance mission in a new city needs to “know” the spatial layout of the surroundings with high confidence. Oftentimes, this understanding must be acquired within a very short amount of time and with limited sensory inputs. The soldier would benefit from a digital avatar that draws inferences about the spatial layout of the city based on an initial set of observations and guides the soldier either in further exploring the environment or in making decisions based on these inferences. In this paper, we present and evaluate an inductive approach to learning spatial associations using sensory data that is available from the simulation environment of a computer game, Unreal Tournament. We study two kinds of spatial relationships between nodes on a level of a game map: nodes that are placed near each other to satisfy some spatial requirement and nodes that are placed near each other to satisfy the design preferences of a level architect. We show that we can infer both kinds of relationships using an association rule mining algorithm. Furthermore, we show how to use an ontology to distinguish between these relationships in order to discover different types of spatial arrangements on a specific map. We discuss how the inferred associations can be used to control an avatar that makes recommendations for navigating unexplored areas on a map. We conclude with some thoughts on the applicability of our methods to scenarios in the real world, beyond the simulation environment of a game, and on how the learned associations can be represented and queried by a simple question-answer type system.     

某型教练机起落架信号电路改进设计

针对某型教练机存外场使用时出现起落架未放到位，而飞行员却没能及时发现的问题，本文对飞机起落架信号电路进行了分析，并提出了相应的改进措施。     

DELMIA在某民机前货舱门装配仿真中的应用

在现代自动化作业系统中,操作和管理的大多是一些复杂系统和各种数字化设备,这对操作人员观察周围环境和完成精准操作任务的要求很高。通过人机工程技术分析,可以对这些复杂、易错的任务逐个分析,合理分配注意力、安排操作顺序,既减轻操作人员的工作负荷又避免出错,切实提高人机工效。     

A straw-soil co-composting and evaluation for plant substrate in BLSS

Material closure is important for the establishment of Bioregenerative Life Support System, and many studies have focused on transforming candidate plant residues into plant culture medium. For the limitations of using wheat straw compost as substrate for plant cultivation, a straw-soil co-composting technique was studied. The changes of pH, C/N value, germination index, cellulose, lignin and so on were monitored during the co-composting process. The maturity was evaluated by the C/N value and the germination index. The result showed that after 45 days’ fermentation, the straw-soil final co-compost with inoculation (T1) became mature, while the co-compost without inoculation (T0) was not mature. In the plant culture test, the T1 substrate could satisfy the needs for lettuce’s growth, and the edible biomass yield of lettuce averaged 74.42 g pot⁻¹ at harvest. But the lettuces in T0 substrate showed stress symptoms and have not completed the growth cycle. Moreover, the results of nitrogen (N) transformation experiment showed that about 10.0% and 3.1% N were lost during the T1 co-composting and plant cultivation, respectively, 23.5% N was absorbed by lettuce, and 63.4% N remained in the T1 substrate after cultivation.     

储氢合金的性质及发展趋势

本文介绍了储氢合金的性质，Ｎｉ－ＭＨ电池原理，以及储氢合金对Ｎｉ－ＭＨ电池所产生的影响，根据目前科学技术的发展以及市场的需求，提出了未来储氢合金及Ｎｉ－ＭＨ电池的发展趋势。