冲压发动机燃烧室压力脉动对进气道的影响分析

冲压发动机燃烧室燃烧时产生的振荡会以声波的形式对进气道结尾激波产生干扰。本研究采用数值方法模拟了不同燃烧室压力脉动频率和振幅对进气道工作状态的影响情况。计算模型为轴对称混压式进气道,控制方程采用雷诺平均N-S方程,湍流模型为标准k-ε模型。求解时时间推进采用二阶隐式格式,空间离散采用AUSM格式。计算结果表明,燃烧室压力振荡频率越大进气道结尾激波运动幅度越小,而振荡幅值越大进气道结尾激波的运动幅度越大。     

航天器抓捕后复合体系统稳定的协调控制研究

针对航天器抓捕后由于系统质量特性和动量的改变而导致复合体系统失稳的问题,提出了两种基于角动量守恒的协调控制方法:关节阻尼控制和关节函数参数化协调控制。这两种方法通过对各关节和飞轮的速度进行协调规划和控制,实现对系统角动量的管理和重分配,在实现对目标进行停靠的同时,保证了基座的稳定性。两种方法各有优缺点,其中,关节函数参数化在实现系统稳定的同时还可使机械臂处于期望的臂型,以方便开展在轨维修等服务操作。所提出的方法将实际飞轮作为动量交换装置,具有很好的工程可实现性。仿真结果验证了方法的有效性。     

一种新的无人机运动目标测速技术

为了满足无人机对运动目标的测速需求,提出一种基于机载光电侦察平台的目标测速算法。建立包括飞机速度、飞机姿态角速率、摄像机指向角速率等15个变量的测速数学模型,并分析测速误差的形成,推导了误差计算公式。仿真结果表明,在无人机目标测速过程中,角速率测量误差对目标测速精度影响较大,尤其是飞机的俯仰角速率误差、横滚角速率误差、摄像机的高低角速率误差对测速精度的影响更为明显,这为提高目标测速精度指明了方向。     

腹部襟翼对飞翼布局飞行器起降气动特性的影响

以某飞翼布局飞行器为初始外形,利用数值模拟方法针对起降状态下腹部襟翼的安装位置及偏度进行了选型研究,并得到了腹部襟翼打开对升降舵舵效以及地面效应的影响规律。结果表明,当腹部襟翼位于重心后40%平均气动弦长时,在保持大迎角良好增升效果的同时对俯仰力矩的改变量也较小;随着腹部襟翼偏角变大,升力系数和阻力系数呈现出准线性增长,而俯仰力矩变化量较小,升降舵偏转1°左右即可配平;相比于腹部襟翼关闭状态,腹部襟翼打开后,升降舵舵效降低约6%,飞行器地面效应引起增升量变大,但纵向静稳定度有所降低。     

工艺参数对电弧增材制造2219铝合金微气孔缺陷的影响分析北大核心CSCD

微气孔是电弧增材制造2219铝合金面临的主要问题。采用Advanced CMT+P(变极性CMT+脉冲)熔滴过渡模式,研究了EP/EN(正负半周波数)、扫描速度、送丝速度等电弧增材工艺参数对成形2219铝合金微气孔缺陷的影响规律。结果表明:通过改变EP/EN、扫描速度、送丝速度等参数调控热输入可影响气孔率;在热输入较低时,气孔以形核和长大为主,随热输入增加微气孔数量增多、尺寸增大;在热输入较高时,气孔逸出开始占优,随热输入增加微气孔数量减少;在热输入低至230.5或高至439.5 J/mm时,平均气孔率均可降低至0.2%以下。     

温差、温滞和温滞差对飞机大部件结合交点协调的影响

本文扼要介绍了有关文献中在温度变化影响协调误差方面的论点及其应用于分析和解决飞机大部件结合交点的协调问题尚存在的不足。分析了温滞和伪线膨胀系数之间的函数关系。针对典型协调路线及其伪线膨胀曲线导出综合考虑温差、温滞和温滞差的协调误差计算公式。给定一定条件,把温差、温滞和温滞差的影响区分开,从而揭示它们对协调误差分别的和综合的影响,以便采取针对性强而经济的控温方案和控温技术条件,提高飞机大部件结合交点的协调性。     

先进的宇航试验舱温控系统

介绍了中国新一代宇航试验舱的温控系统。该温控系统设计思想先进、结构新颖。在直径２．３ｍ,长２ｍ的封闭舱体控温面上,实现了０℃～５０℃的任意温度定点控制及９０ｍｉｎ内的正弦波、梯形波、三角波的周期变化;在整个控温面上温度非均匀性（均方根偏差）小于０．３℃,远远超过了非均匀度±１℃、控制精度±２℃的原设计指标。     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

基于应变测量方法的卫星天线阵列变形检测

文章介绍了基于应变测量的卫星天线变形检测方法。该方法针对卫星天线在实际工作中产生的阵列形变,应用弹性力学的有关理论和解析方法,通过测量天线阵列单元面板表面的应变数据推导并拟合出天线阵列弯曲的挠度函数,绘制出天线阵列单元的变形构型。实验表明,该方法有较高的精度,能够为天线输出信号的相位校正控制提供依据。     

我国高原机场运行的地面及空勤特殊保障

位于我国西部高原的机场,一般净空条件极差、气候复杂多变。高原航线地形复杂,航路安全高度高,航路的运行安全问题尤为突出。针对中国西部高原复杂机场及航线的特点,对飞机性能、特殊飞行操作、适航改装、机务维修进行分析及论述,对规范高原航线运行合格审定提出一些建议。