离子推进器C/C复合材料栅极研究

栅极是离子推进器的关键部件之一,直接影响推进器的可靠性和寿命。由于C/C复合材料栅极具有比较小的热膨胀系数和较强的耐溅射性,可以提高离子推进器的可靠性并延长其寿命。文章通过调研综述C/C复合材料栅极的研究和应用发展状况,针对目前我国离子推进器的研究发展水平,提出开展C/C复合材料栅极研究工作的初步思路。     

Multi-function radar emitter identification based on stochastic syntax-directed translation schema

To cope with the problem of emitter identification caused by the radar words＇ uncertainty of measured multi-function radar emitters, this paper proposes a new identification method based on stochastic syntax-directed translation schema（SSDTS）. This method, which is deduced from the syntactic modeling of multi-function radars, considers the probabilities of radar phrases appearance in different radar modes as well as the probabilities of radar word errors occurrence in different radar phrases. It concludes that the proposed method can not only correct the defective radar words by using the stochastic translation schema, but also identify the real radar phrases and working modes of measured emitters concurrently. Furthermore, a number of simulations are presented to demonstrate the identification capability and adaptability of the SSDTS algorithm.The results show that even under the condition of the defective radar words distorted by noise,the proposed algorithm can infer the phrases, work modes and types of measured emitters correctly.     

Three-Dimensional Stress Fields in Finite Thickness Plate with Hole Under Shear Load

The theoretical solutions are obtained for the three-dimensional(3-D)stress field in an infinite isotropic elastic plate with a through-the-thickness circular hole subjected to shear load at far field by using Kane and Mindlin′s assumption based on the stress function method.Based on the present solutions,the characteristics of 3-D stress field are analyzed and the emphasis is placed on the effects of the plate thickness and Poisson′s ratio on the deviation of the present 3-D in-plane stress from the related plane stress solutions,the stress concentration and the out-of-plane constraint.The present solutions show that the stress concentration factor reaches its peak value of about 8.9% which is higher than that of the plane stress solutions.As expected,the out-of-plane stress constraint factor can reach 1on the surface of the hole when the plate is a very thick one.     

Numerical Simulation of Characteristics of CEX Ions in Ion Thruster Optical System

Charge exchange(CEX) ions could inflict severe damages on the ion thruster optical system. This article is aimed at investigating the characteristics of the CEX ions and their influences upon the optical system by means of particle-in- cell(PIC) ion simulation and Monte Carlo collision(MCC) methods. The results from numerical simulation indicate that despite the fact that CEX ions appear in the entire beamlet region near the ion optical system, the ones that present themselves downstream of the accelerator grid have good reason for attracting more attention. As their trajectories are significantly affected by the local electric field, a great number of CEX ions are accelerated toward grids resulting in sputtering erosion. When the influences of the CEX ions are considered in the numerical simulation, there could hardly be observed augments in the screen grid current, but the accelerator grid current increases from zero to 1. 4% of the beamlet current. It can be understood from the numerical simulation that the CEX ions formed in the region far downstream of the accelerator grid should be blamed for the erosion on the downstream surface of the accelerator grid.     

战术导弹发动机无线电干扰滤波器可靠性验证试验

战术导弹发动机无线电子干扰滤波器是确保导弹发动机战勤安全的一个重要电子产品。为了评价它的可靠性，需对其进行可靠性验证试验。据此，结合一种导弹发动机无线电干扰滤波器的可靠性验证试验，讨论了其可靠性验证试验的数学模型，试验方案设计和试验方面的有关问题。     

FMS通信技术和制造信息服务研究与开发

以柔性制造系统FMS-500为应用背景,提出了在工业控制实时局域网基础上适合FMS实时控制和信息集成需求的通信体系结构,并以加工中心为例介绍了底层设备FMS通信接口和制造信息服务的设计与开发.     

Collimator-based Fourier-transform imaging

In viewpoint of signal processing, we describe the principle of collimator-based Fourier-transform imaging, from verifying Fourier-transform function of collimator to presenting theoretical model of dirty image. This gives us a guideline in designing collimator imager, that is configuring the subcollimators properly to improve the quality of the dirty image. Here we optimize the arrangement of the subcollimators of YOHKOH Hard X-ray Telescope (HXT) to get the Point Spread Function of sidelobes as small as possible and simulate that with MATLAB.     

机箱盖板金属型铸造工艺

采用计算机仿真技术对机箱盖板金属型铸造过程进行了充型和凝固模拟，并对铸造工艺进行了优化。     

基于局域网的无人机实时通用仿真系统

讨论了一种面向对象的、独立于特定无人机的实时通用仿真系统的设计与实现。系统硬件平台采用了基于局域网的多机分布式体系结构。系统软件采用了基于windows平台的面向对象的设计语言。文中就模型解算、网络通信、通用无人机模型数据库及三维动画显示技术作了详细的论述。该系统现已成功用于某型无人机的实时仿真中。     

Random signal radar - a winner in both the military and civilian operating environments

Besides some general requirements, modern military radars should possess excellent LPI (low probability of intercept) properties. And civilian radars should satisfy the rigorous requirement of EMC (electro-magnetic compatibility) performance. The special features of random signal radar are analyzed here based on the different requirements for military and civilian use. Results show that random signal radar has excellent LPI property and EMC performance simultaneously, which can satisfy both military and civilian requirements.