基于PIC方法的离子发动机光学系统粒子模拟

采用单元内粒子(PIC, Particle-In-Cell)方法对离子发动机光学系统进行了等离子体粒子模拟.PIC方法可有效地对等离子体进行粒子模拟,其中电场求解采用SOR(Successive Over Relaxation)方法,离子加速方法采用蛙跳格式.推进剂采用氙,模拟粒子为单核离子.模拟得到了栅极间电势分布、电场强度分布及栅极间氙离子数密度分布.计算结果表明,在所取的光学系统电压参数和几何参数下,粒子束能够顺利通过栅极孔,不会撞击到栅极孔壁上.粒子模拟为今后开展离子发动机光学系统腐蚀机理分析及寿命评估提供了有效的数值方法.      

基于SLA的网格监控体系GSLMA及其实验床

从体系结构的角度出发,将现有网格监控工具分为3类,对每一类网格监控结构进行了分析 和对比,并提出了一种基于服务级别协定SLA(Service Level Agreement)的网格服务监控体系结构GSLMA(Grid Service Level Monitoring Architecture).GSLMA采用基 于面向服务的体系结构SOA(Service Oriented Architecture)的松散耦合结构,通过动态部 署解决了对新增服务的监控扩展,并提供第三方的监控功能,是一个具有高灵活性和高可伸 缩性的网格监控体系结构.最后,介绍了实现GSLMA实验床中的关键技术,包括:对开放网格 服务体系结构OGSA(Open Grid Service Architecture)容器进行扩展,采用Web服务级别协定WSLA(Web Service Level Agreement)解决被监控服务信息的统一描述等等.      

反舰导弹末端蛇行机动的控制信号设计

采用过载控制技术设计了反舰导弹的飞行控制系统,对反舰导弹的末 端蛇行机动的控制问题进行了研究。设计了实现末端蛇行机动的两组控制信 号:过载控制信号和质心控制信号。在这两组控制信号的综合控制下,反舰导弹 实现了多种形式的末端航向和纵向蛇行机动。弹道仿真表明了所设计的控制信 号的有效性。     

CCSDS标准星载数据系统的优化设计方法

分析了 CCSDS星载数据系统与传统数据系统在设计方法上的差别 ,给出了在理论指导下以计算机仿真为主要手段的 CCSDS星载数据系统优化设计方法和设计流程 ,并对其中的几个重点环节加以进一步说明。     

离子推进器C/C复合材料栅极研究

栅极是离子推进器的关键部件之一,直接影响推进器的可靠性和寿命。由于C/C复合材料栅极具有比较小的热膨胀系数和较强的耐溅射性,可以提高离子推进器的可靠性并延长其寿命。文章通过调研综述C/C复合材料栅极的研究和应用发展状况,针对目前我国离子推进器的研究发展水平,提出开展C/C复合材料栅极研究工作的初步思路。     

Three-Dimensional Stress Fields in Finite Thickness Plate with Hole Under Shear Load

The theoretical solutions are obtained for the three-dimensional(3-D)stress field in an infinite isotropic elastic plate with a through-the-thickness circular hole subjected to shear load at far field by using Kane and Mindlin′s assumption based on the stress function method.Based on the present solutions,the characteristics of 3-D stress field are analyzed and the emphasis is placed on the effects of the plate thickness and Poisson′s ratio on the deviation of the present 3-D in-plane stress from the related plane stress solutions,the stress concentration and the out-of-plane constraint.The present solutions show that the stress concentration factor reaches its peak value of about 8.9% which is higher than that of the plane stress solutions.As expected,the out-of-plane stress constraint factor can reach 1on the surface of the hole when the plate is a very thick one.     

Numerical Simulation of Characteristics of CEX Ions in Ion Thruster Optical System

Charge exchange(CEX) ions could inflict severe damages on the ion thruster optical system. This article is aimed at investigating the characteristics of the CEX ions and their influences upon the optical system by means of particle-in- cell(PIC) ion simulation and Monte Carlo collision(MCC) methods. The results from numerical simulation indicate that despite the fact that CEX ions appear in the entire beamlet region near the ion optical system, the ones that present themselves downstream of the accelerator grid have good reason for attracting more attention. As their trajectories are significantly affected by the local electric field, a great number of CEX ions are accelerated toward grids resulting in sputtering erosion. When the influences of the CEX ions are considered in the numerical simulation, there could hardly be observed augments in the screen grid current, but the accelerator grid current increases from zero to 1. 4% of the beamlet current. It can be understood from the numerical simulation that the CEX ions formed in the region far downstream of the accelerator grid should be blamed for the erosion on the downstream surface of the accelerator grid.     

战术导弹发动机无线电干扰滤波器可靠性验证试验

战术导弹发动机无线电子干扰滤波器是确保导弹发动机战勤安全的一个重要电子产品。为了评价它的可靠性，需对其进行可靠性验证试验。据此，结合一种导弹发动机无线电干扰滤波器的可靠性验证试验，讨论了其可靠性验证试验的数学模型，试验方案设计和试验方面的有关问题。     

FMS通信技术和制造信息服务研究与开发

以柔性制造系统FMS-500为应用背景,提出了在工业控制实时局域网基础上适合FMS实时控制和信息集成需求的通信体系结构,并以加工中心为例介绍了底层设备FMS通信接口和制造信息服务的设计与开发.     

Collimator-based Fourier-transform imaging

In viewpoint of signal processing, we describe the principle of collimator-based Fourier-transform imaging, from verifying Fourier-transform function of collimator to presenting theoretical model of dirty image. This gives us a guideline in designing collimator imager, that is configuring the subcollimators properly to improve the quality of the dirty image. Here we optimize the arrangement of the subcollimators of YOHKOH Hard X-ray Telescope (HXT) to get the Point Spread Function of sidelobes as small as possible and simulate that with MATLAB.