火星进入气体辐射加热研究进展

针对飞行器进入火星大气时气体辐射加热对防热设计带来不确定性，在简述火星探测和气体辐射研究的发展历程的基础上，对火星进入气体辐射加热研究的进展进行综述。首先，针对火星大气环境描述了气体辐射加热的概念和问题由来。其次，重点综述了近年来火星进入气体辐射加热基础模型的数值和试验研究进展，其中包括：热化学非平衡气体动力学、气体辐射特性和辐射传输的计算模型与方法等数值研究；地面测试设备、试验技术和模拟火星大气环境的气体辐射测量与验证等试验研究。再次，综述了流动辐射耦合和后体气体辐射加热等火星进入器设计方面开展的研究。最后，对未来火星进入气体辐射加热研究进行了展望，提出了研究建议。     

Flight Safety System Evaluation and Optimal Linear Prediction

The complexity of flight safety system is usually affected by a variety of uncertainties.The uncertainty of overall security situation of flight safety system are hardly determined. In this work,flight safety assessment index system is firstly established based on software hardware environment liveware management(SHELM)model. And flight safety assessment is also carried out with matter-element theory algorithm to obtain safety state. According to correlation degree values of each evaluation index,key indexes affected flight safety are obtained. Under the assumption that the flight safety system is a linear dynamic system and combining the above evaluation analysis,Kalman filter algorithm is used to carry out prediction analysis on security situation. A simulation analysis is carried out based on an actual flight safety situation of an airline. The results show that the security state of airline flight safety system in a short period of time can be obtained,and main factors affecting flight safety are found out. This provides a viable way for airlines to further strengthen flight safety management.     

基于落点预测的高旋火箭弹弹道修正算法

高旋火箭弹的修正控制是基于等效力实现的二维弹道修正控制，由于弹体存在陀螺进动和马格努斯效应，在控制力作用下产生的附加攻角引起的升力与控制力的矢量合为等效力，其大小与方向在控制过程中不断变化，不能简单根据偏差量（修正量）的比例关系来确定控制力的方向。基于此，分析了控制力与等效力的关系，提出了一种基于弹道落点预测的控制算法。首先利用弹道落点预测模型实时预测落点与目标的偏差量，然后利用小扰动法构造偏差量对控制量的敏感系数矩阵，通过偏差量与敏感系数矩阵解算出纵、横两个方向的需用控制量。采用修正前后速度矢量的位置关系得到控制量的合矢量及其方位角，并利用控制量的合矢量与等效力计算出控制周期，在控制周期内按照等效力方位角调整控制力的方向实现对高旋火箭弹的精确控制，解决了非线性耦合问题。仿真结果表明该算法具有较高的控制精度，为工程应用提供理论依据。     

本地标准时间频率的产生与保持

近年来，地方协调时UTC(BIRM)守时能力稳步提升，截至目前，UTC(BIRM)与UTC的相对频率偏差优于3E-14，时间偏差优于20ns。本文概括介绍了守时系统的组成，本地频率驾驭与主备同步技术，以及TA(BIRM)算法研究等。     

基于通航飞机DA40维修演示系统的开发

提高通用航空器维修人员的业务水平,是通用航空事业快速发展的基本保障。为满足通用航空维修运行的需要,研发针对通用飞机的维修演示系统平台,可有效提高维修人员的学习效率,且具有广阔的社会效益和经济效益。系统基于DA40飞机维修手册和维修培训教学大纲开发,能较好地测试演示系统各项功能的完整性,具有广泛的示范意义。     

Internet2—未来的Internet

介绍了Internet2的发展、基本结构和网络互连等问题，描述了与Internet2紧密相关的gigaPoP的组成，说明了必须考虑的参数和约束条件，阐明了所要采用的路由和服务质量协议。     

Experimental comparison between aircraft fuel tank inerting processes using NEA and MIG

Fuel tank inerting technologies are able to reduce the fire risk by injection of inert gas into the ullage or fuel, the former called ullage washing and the latter fuel scrubbing. The Green On-Board Inert Gas Generation System (GOBIGGS) is a novel technology based on flameless catalytic combustion, and owning to its simple structure and high inerting efficiency, it has received a lot of attentions. The inert gas in the GOBIGGS is mainly comprised of CO₂, N₂, and O₂ (hereinafter, Mixed Inert Gas (MIG)), while that in the On-Board Inert Gas Generation System (OBIGGS), which is one of the most widely used fuel tank inerting technologies, is Nitrogen-Enriched Air (NEA). The solubility of CO₂ is nearly 20 times higher than that of N₂ in jet fuels, so the inerting capability and performance are definitely disparate if the inert gas is selected as NEA or MIG. An inerting test bench was constructed to compare the inerting capabilities between NEA and MIG. Experimental results reveal that, if ullage washing is adopted, the variations of oxygen concentrations on the ullage and in the fuel are nearly identical no matter the inert gas is NEA or MIG. However, the ullage and dissolved oxygen concentrations of MIG scrubbing are always higher than those of NEA scrubbing.     

测点布局对航空发动机总压畸变指数的影响

为了阐明测点布局对航空发动机进气总压畸变测试结果的影响，利用旋转总压测量耙对5种畸变流场的稳态和动态总 压畸变成分进行了测试，计算了旋转总压测量耙位于不同位置时畸变流场的稳态周向总压畸变指数和动态总压畸变指数，分析了 不同测点布局下总压畸变指数计算结果的偏差。结果表明：测量耙/测点与畸变流场的相对周向位置对总压畸变指数计算结果的 准确性至关重要，对于所分析的5种畸变流场，增加测量耙/测点周向数目并不能使总压畸变指数计算结果的偏差单调减小，但可 降低其对测量耙/测点周向位置的敏感度。基于畸变区域周向分布设计稳态总压畸变测量耙的周向位置，组合使用不同相对半径 处测点对动态总压畸变进行监测，可提高总压畸变指数计算结果的准确性。