Spectroscopic analysis of the solar flare event on 2002 August 3 with the use of RHESSI and RESIK data

We use simultaneous observations from RESIK and RHESSI instruments to compare plasma properties of a major solar flare in its rise and gradual phase. This event occurred on 2002 August 3 (peak time at 19:06 UT). The flare had a very good coverage with RESIK data and well-resolved soft and hard X-ray sources were seen in RHESSI images. Spectra of X-ray radiation from RHESSI images are studied and compared with RESIK measurements in different flare phases. Result shows large differences in flare morphology and spectra between flare rise and gradual phase.     

Dynamics of an Eddy-Current-Torqued Gyro-Stabilized Assembly

Prominent among the commonly encountered gyro-stabilized assemblies used in guidance and tracking are those which are eddy-current torqued. Although eddy-current-torquecd lead- computing gunsights, which use spinning mirrors, have been well known for thirty years, it has been difficult to find an analysis of the torques developed by the precession mechanism. In this paper a model configuration of the torquer is presented. The total gyro dynamics are then determined by including these torque terms in the model presented in the preceding paper.     

X-Ray spectroscopic investigation of the coronal structure of capella

The binary system Capella (G6 III + F9 III) has been observed on 1979 March 15 and on 1980 March 15–17 with the Objective Grating Spectrometer (OGS) onboard theEinstein Observatory. The spectrum measured with the 1000 l/mm grating covers the range 5–30 Å with a resolution < 1 Å. The spectra show evidence for a bimodal temperature distribution of emission measure in an optically thin plasma with one component 5 million degrees and the other one 10 million degrees. Spectral features can be identified with line emissions from O VIII, Fe XVII, Fe XVIII, Fe XXIV, and Ne X ions. Good spectral fits have been obtained assuming standard cosmic abundances. The data are interpreted in terms of emission from hot static coronal loops rather similar to the magnetic arch structures found on the Sun. It is shown that the conditions required by this model exist on Capella. Mean values of loop parameters are derived for both temperature components.     

Experiments in Adaptive Estimation of Unknown Binary Waveforms

A special-purpose adaptive machine is described which carries out estimation in real time of an unknown binary waveform which is perturbed with additive Gaussian noise. Unknown waveforms of over 103 samples in duration can be recovered. The unknown waveforms are of unknown epoch and can reappear at either random or periodic time intervals. The observed signal is received at moderate or low signal-to-noise ratios so that a single observation of the received data (even if one knew the precise signal arrival time) is not sufficient to provide a good estimate of the signal waveshape. Experimental results are described which show transient behavior waveform estimate. The transient behavior is expressed as the number of errors in the current estimate of the signal plotted vs. time. In a noisy environment, each ``learning' transient is a random time function. These learning transients are shown for several different signal-to-noise ratios and indicate the threshold noise levels for various types of initial states of the machine memory.     

The FAST Satellite Fields Instrument

We describe the electric field sensors and electric and magnetic field signal processing on the FAST (Fast Auroral SnapshoT) satellite. The FAST satellite was designed to make high time resolution observations of particles and electromagnetic fields in the auroral zone to study small-scale plasma interactions in the auroral acceleration region. The DC and AC electric fields are measured with three-axis dipole antennas with 56 m, 8 m, and 5 m baselines. A three-axis flux-gate magnetometer measures the DC magnetic field and a three-axis search coil measures the AC magnetic field. A central signal processing system receives all signals from the electric and magnetic field sensors. Spectral coverage is from DC to 4 MHz. There are several types of processed data. Survey data are continuous over the auroral zone and have full-orbit coverage for fluxgate magnetometer data. Burst data include a few minutes of a selected region of the auroral zone at the highest time resolution. A subset of the burst data, high speed burst memory data, are waveform data at 2×10⁶ sample s^–1. Electric field and magnetic field data are primarily waveforms and power spectral density as a function of frequency and time. There are also various types of focused data processing, including cross-spectral analysis, fine-frequency plasma wave tracking, high-frequency polarity measurement, and wave-particle correlations.     

Radio observations of Venus and the interpretations

The radio observations of Venus are reviewed and compared with theoretical microwave spectra computed for a variety of models of the Venusian environment. The models considered are (a) a CO₂-N₂ atmosphere, (b) an atmosphere of dust (the aeolosphere model), and (c) a cloud model with various loss mechanisms in the cloud. The effect of polarization on the surface emissivity has been included in all the computations. It is shown how the radio observations place limits upon the acceptable models, for example, the density and size of dust particles required in the aeolosphere model. It is shown how some models place severe restrictions on radar observations at short centimeter wavelengths, thereby emphasizing the importance of such experiments. These same models show that the Mariner II observations can not be interpreted in terms of surface phenomena and provide a new interpretation for the microwave phase effect.This work was supported in part by the U.S. Army, Navy and Air Force under Contract DA36-039-AMC-03200(E); and in part by the National Aeronautics and Space Administration (Grants NsG-250-62 and NsG-419).     

Modified Generalized Sign Test Processor for 2-D Radar

The modified generalized sign test processor is a nonparametric, adaptive detector for 2-D search radars. The detector ranks a sample under test with its neighboring samples and integrates (on a pulse-to-pulse basis) the ranks with a two-pole filter. A target is declared when the integrated output exceeds two thresholds. The first threshold is fixed and yields a 10-6 probability of false alarm when the neighboring samples are independent and identically distributed. The second threshold is adaptive and maintains a low false-alarm rate when the integrated neighboring samples are correlated and when there are nonhomogeneities, such as extraneous targets, in the neighboring cells. Using Monte Carlo techniques, probability of false-alarm results, probability of detection curves, and angular accuracy curves have been generated for this detector. The detector was built and PPI photographs are used to indicate the detector's performance when the radar is operated over land clutter.     

电火花多次切割提高硬质合金表面质量的研究

阐述了硬质合金材料的电火花线切割加工特点.通过采用限位棒、恒张力装置提高电极丝的空间稳定性,并在前两次切割采用复合工作液最后精修采用煤油作为工作介质对硬质合金YG8进行了多次切割.试验结果表明,多次切割的加工表面粗糙度达到1μm以下;与采用复合工作液精修后的加工表面相比,煤油精修后的加工表面微裂纹和微孔洞均明显减少,获得较好的加工表面质量.     

Broadening of Fe X (6374 Å) profiles above the limb in a coronal hole

Profiles of the visible Fe X (6374 Å) coronal emission line as a function of height above the limb were obtained out to 1.16 solar radii in a coronal hole using the NSO/Sacramento Peak Observatory Coronagraph, Universal Spectrograph and a CCD camera. These are the first coronal line profiles obtained as a function of height in a coronal hole from the ground. Analysis of the line widths suggests a large component of nonthermal broadening which increases with height ranging from 40 to 60 km/s, depending upon the assumed temperature or thermal component of the profile.