关于Davidson—Lanczos方法的收敛率

本文对文[1]提出的求解大型对称矩阵A的极端(几个最大或最小)特征值及相应特征向量的Davidson—Lanczos方法,用Rayleigh—Ritz逼近理论,研究了该方法的收敛率。证明了由该方法产生的规范正交向量{v_i}_i~m=1是Krylov子空间K_m≡Span(v_1,Av_1,…,A~(m-1)v_1)的一组基。设A的k个最大特征值为又,λ_1>λ_2>…>λ_k,相应的近似特征值为λ_i~(m)(i=1,…,k),得到 这里γ_i(γ_i>1),W_i和W_i~(m)是常数。     

民机营运维修保障系统仿真

阐述了民机维修保障仿真系统，并讨论了它与民机可靠性，维修性和经济性仿真大系统的关系。文中重点介绍了民机营运阶段维修保障系统仿真建模及其应用软件ＣＡＲＭＥＳ的功能模块设计，最后以国内某航空公司营运的Ｙ－７飞机为例对其ＲＭＥ进行分析和评价。     

一个基于故障树模型的诊断系统

提出一种基于故障树模型的诊断方法，并基于该方法实现了一个验证性的诊断系统。基于故障树的层次诊断模型，提出了确定性推理方法和可能性推理方法及面向故障树的基于框架和广义规则的混合知识表示方法。最后在ＣＯＭ－ＰＡＱ４８６微机上，Ｗｉｎｄｏｗｓ环境下，用ｂｏｒｌａｎｄＣ＋＋实现了该诊断系统，并通过对一个电路系统实验台的诊断验证了方法的有效性。     

火箭橇体进水现象研究

在考核过载承受能力的火箭橇试验后,橇体内发现有水,从空气动力学的角度,对火箭橇体进水现象进行了初步分析,并利用FLUENT软件对进水原因进行了初步研究,通过分析,发现结构在穿越跨音速阶段时,由于内外压差的变化将导致内部或外部产生水汽。该发现为结构设计提供有益的建议。     

Mesh-dependence of Material with Softening Behavior

The issue of mesh-dependence emerges when the conventional continuum damage model is applied to handling the softening behavior. In order to circumvent the mesh-dependence, the non-local theory is introduced into the conventional damage model and the finite element formulas are derived for two-dimensional gradient-enhanced damage model. A new element is proposed in which the basic unknown quantities are displacement, non-local equivalent strain and the gradient of non-local equivalent strain. The element and constitutive equation proposed in this article are added to the finite element software ABAQUS through user subroutine UEL. Numerical results show that the gradient-enhanced damage model can eliminate the mesh-dependence and is effective for dealing with the issue of softening behavior.     

DELMIA在某民机前货舱门装配仿真中的应用

在现代自动化作业系统中,操作和管理的大多是一些复杂系统和各种数字化设备,这对操作人员观察周围环境和完成精准操作任务的要求很高。通过人机工程技术分析,可以对这些复杂、易错的任务逐个分析,合理分配注意力、安排操作顺序,既减轻操作人员的工作负荷又避免出错,切实提高人机工效。     

模具工业发展中的几个问题

叙述了对模具工业地位与作用的认识 ,分析了我国加入世贸组织对模具工业的影响 ,并提出了发展模具工业的政策措施建议。     

Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints

An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.     

变体平尾翼型气动外形设计方法

为了使飞机在控制飞行姿态时仍然能保持最优升阻比,提出了一种通过改变翼型形状来代替传统控制舵面来控制飞机俯仰的方法。采用伯恩斯坦多项式对机翼的翼型进行数学建模,并采用遗传算法通过空气动力学仿真对翼型进行优化得到一组在一定飞行环境下、产生附加阻力最小且随升力系数变化的翼型形状。通过对比证明在提供相同升力的情况下,变体翼比传统的控制舵面产生更小的附加阻力。根据翼型形状和升力系数的变化采用数据拟合的方法得到翼型形状控制参数随升力变化的规律。通过算例对变化规律的验证表明其可以用来作为飞行姿态控制的翼型形状变化依据。