航天器子结构模态综合法研究现状及进展

现代航天器结构十分复杂,无论采用计算方法还是试验方法进行分析都是十分艰难的。在这样的研制背景下,子结构模态综合法应运而生。系统地回顾和总结了三大类子结构模态综合法的发展历程和相应的改进,介绍了该方法在航天工程上的应用。采用该方法可极大地提高航天器型号的研制效率。提出了子结构模态综合法面临的问题。     

某卫星微振动建模与仿真

针对某卫星微振动力学环境,参考IME颤振分析建模方法,建立了一种卫星刚柔耦合多体动力学微振动仿真模型,并通过地面试验验证了利用微振动仿真模型预测卫星在轨微振动响应的有效性,阐述了卫星在轨微振动响应仿真计算预测方法。利用该微振动仿真模型能较准确地预测卫星在轨微振动响应以及微振动传递特性。     

泡沫铝合金镀镍工艺研究

本文研究了在高硅铸铝制备的泡沫铝合金样品上镀镍工艺,提出了一种确定泡沫铝合金表面积的方法。讨论了主盐、还原剂、络合剂、缓冲剂等配方主要成份和ｐＨ 值、温度等工艺条件对化学镀镍的沉积速度和镀层质量的影响,优化了前处理方法,从而得到了适合于泡沫铝合金的镀镍工艺。     

Mesh-dependence of Material with Softening Behavior

The issue of mesh-dependence emerges when the conventional continuum damage model is applied to handling the softening behavior. In order to circumvent the mesh-dependence, the non-local theory is introduced into the conventional damage model and the finite element formulas are derived for two-dimensional gradient-enhanced damage model. A new element is proposed in which the basic unknown quantities are displacement, non-local equivalent strain and the gradient of non-local equivalent strain. The element and constitutive equation proposed in this article are added to the finite element software ABAQUS through user subroutine UEL. Numerical results show that the gradient-enhanced damage model can eliminate the mesh-dependence and is effective for dealing with the issue of softening behavior.     

DELMIA在某民机前货舱门装配仿真中的应用

在现代自动化作业系统中,操作和管理的大多是一些复杂系统和各种数字化设备,这对操作人员观察周围环境和完成精准操作任务的要求很高。通过人机工程技术分析,可以对这些复杂、易错的任务逐个分析,合理分配注意力、安排操作顺序,既减轻操作人员的工作负荷又避免出错,切实提高人机工效。     

模具工业发展中的几个问题

叙述了对模具工业地位与作用的认识 ,分析了我国加入世贸组织对模具工业的影响 ,并提出了发展模具工业的政策措施建议。     

Sliding mode control based guidance law with impact angle constraint

The terminal guidance problem for an unpowered lifting reentry vehicle against a sta- tionary target is considered. In addition to attacking the target with high accuracy, the vehicle is also expected to achieve a desired impact angle. In this paper, a sliding mode control （SMC）-based guidance law is developed to satisfy the terminal angle constraint. Firstly, a specific sliding mode function is designed, and the terminal requirements can be achieved by enforcing both the sliding mode function and its derivative to zero at the end of the flight. Then, a backstepping approach is used to ensure the finite-time reaching phase of the sliding mode and the analytic expression of the control effort can be obtained. The trajectories generated by this method only depend on the initial and terminal conditions of the terminal phase and the instantaneous states of the vehicle. In order to test the performance of the proposed guidance law in practical application, numerical simulations are carried out by taking all the aerodynamic parameters into consideration. The effec- tiveness of the proposed guidance law is verified by the simulation results in various scenarios.     

Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints

An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.