地地弹道导弹可用性仿真评估系统构建

阐述了地地弹道导弹可用性评估的重要性,并以此为需求牵引,提出了以MTMC-RDEDS(Mission Time Monte Carlo Random Discrete Event Dynamic Systems)为核心的可用性建模与仿真一体化框架,结合实际应用,以模型重用技术为基础,构建了拥有丰富建模与仿真知识库、模块化设计与开放式接口的导弹可用性仿真评估系统总体框架及软件层次结构,并给出了涉及工作状态、维修保障、统计优化在内的核心仿真模型与算法,探讨了系统实现的关键技术,包括:随机变量建模、武器系统建模、仿真系统可信度评估.利用VC++和相关软件开发了地地弹道导弹可用性仿真评估系统,给出了仿真运行界面,并进行实例分析,验证模型和系统的有效性.仿真的结果与实际试验情况吻合较好,表明该动态评估方法快捷有效,评估系统建设方案合理可行,适用于工程分析,不失为地地弹道导弹可用性评估的一种有效手段.     

Research on constellation refueling based on formation flying

A new scheme for refueling satellite constellation is proposed in this paper. Compared with the traditional research, where the satellite refueling is implemented through spacecraft rendezvous and docking, the new pattern studied here is based on formation flying, and it is more feasible, safer and more reliable. On the grounds of the proposed pattern, two refueling strategies are studied. The first is called single supplier refueling (SSR) based on formation flying. In this scenario, one fuel-sufficient satellite called a supplier, departs from its parking orbit, and after a series of orbit maneuvers, arrives at the target constellation that consists of multiple fuel-deficient satellites called workers. It then transfers equal fuel to each worker within the prescribed mission time. The second strategy is called double suppliers refueling (DSR) based on formation flying. This time two suppliers take charge of refueling half of the workers respectively in the same way as SSR. Using a genetic algorithm, the orbit of a supplier with a minimum consumption of fuel can be obtained once the mission time is fixed. Simulation results indicate that DSR is superior to SSR and that this dominance will be more distinct as the number of workers increases and the mission time decreases.     

星型GAP与固体推进剂填料的表界面性能

采用动态接触角和界面张力仪,研究了星型GAP(S-GAP)与AP、RDX和HMX之间的表界面性能.结果表明,星型GAP与固体填料间的界面张力关系为γSL(S-GAP/RDX)<γSL(S-GAP/HMX)<γSL(S-GAP/AP);星型GAP与固体填料间的粘附功关系为Wa(S-GAP/AP)相似文献   

航天型号进度控制研究

针对航天型号研制生产的现状,分析了航天型号进度控制的原理,介绍了航天型号进度控制的流程和方法,深入分析了当前进度管理中存在的问题,并结合项目管理理论提出了解决这些问题的总体思路和相应的调整措施。对及时推广和应用先进型号进度控制方法,推动航天型号的持续高速发展具有重要的现实意义。     

星地遥感数据压缩的差分编码方法研究

为了提高星地传输的工作效率,文章以信息论为理论基础,提出一种差分编码方法用于星地遥感数据的传输。同时,鉴于地表覆盖本身的不确定度与应用需求的不同,提出了分区预测差分编码与保持立体测量精度的差分编码。这两种压缩策略可进一步显著提高差分编码的压缩比。     

DLR-F6翼身组合体数值计算

使用自行研制的混合网格亚跨超声速流场解算器程序MFlow计算了AIAA第三届阻力会议提供的DLR-F6及其带整流装置FX2B情况下的阻力。重点分析了两者的网格收敛特性、阻力极曲线以及压力分布等,并与阻力会议的各个软件的计算结果进行比较。详细分析了DLR-F6翼身结合处后缘附近网格精度对分离气泡计算的影响。计算结果表明,MFlow程序的计算精度与国外软件相近,能够为阻力计算提供比较精确的结果。     

一种铍合金材料的结构和性能

对国外某型号飞机所用的铍合金刹车材料进行了密度测试、结构观察、化学元素分析、力学、物理和摩擦性能表征,并与C/C、C/SiC复合材料和粉末冶金材料的相关性能作了对比,结果表明,粉末冶金铍合金材料密度低,力学和摩擦性能优异,是一种很有发展前途的刹车材料.     

基于非线性静力学模型的飞机系留载荷计算方法研究

由于飞机在强风下系留时,机体承受各方向的载荷较大,因此需对系留结构及系留索是否具有足够的承载能力进行分析,而其中系留载荷的计算就显得异常重要。采用MSC．Nastran软件,针对飞机存系留情况下,系留索的单向承载性及起落架与地面的非线性接触特性,通过应用非线性间隙单元,建立了非线性静力仿真模型,并计算了飞机在系留状况下,各系留索承受的张力及各系留点所受的载荷,计算中同时考虑了起落架缓冲支柱空气弹簧力对于系留载荷的影响,从而为飞机系留载荷提供了一种新的有限元计算方法。     

民机预先研究的思考和认识

为贯彻执行公司领导有关推进自主创新和加强预先研究的精神,概括了有关民机预先研究的粗浅思考和认识,为摸清民机技术家底,梳理民机关键技术,编制预研发展规划,加强民机预先研究,实现民机研发体系,在此起到抛砖引玉之功效。     

Variations of ionospheric total electron content before three strong earthquakes in the Qinghai-Tibet region

We investigate the ionospheric total electron content (TEC) anomalies occurred in the Qinghai-Tibet region before three large earthquakes (M > 7.0). The temporal and spatial TEC variations were used to detect the ionospheric possible precursors of these earthquakes. We identified two TEC enhancements in the afternoon local time 9 days and 2–3 days before each earthquake, between which a TEC decrement occurred 3–6 days before earthquakes. These anomalies happened in the area of about 30° in latitude and the maximum is localized equatorward from the epicenters. These TEC anomalies can be found in all three earthquakes regardless the geomagnetic conditions. The features of these anomalies have something in common and may have differences from those caused by geomagnetic storms. Our results suggest that these ionospheric TEC perturbations may be precursors of the large earthquakes.