Residual stresses and endurance strength under tension-compression in the conditions of stress concentration

Residual stresses and endurance strength of specimens with stress concentrators are considered. The results obtained make it possible to predict the fatigue limit of strengthened parts with concentrators in the case of tension-compression.     

On-board statistical detection and compensation of anomalous pilot-aircraft interactions

A statistical method for the on-board detection and compensation of adverse oscillations in pilot-aircraft systems is presented. A recursively updated linear model representing the pilot-aircraft system is used to continuously check for stability loss. The instability-related oscillations are detected early, using a statistical hypothesis test. Furthermore, a specially designed stability augmentation system assists the pilot during the instability periods. The method's effectiveness is demonstrated via data obtained from a flight simulator and a detailed simulation model.     

Robust wavelet neuro control for linear brushless motors

Design, simulation and experimental implementation of a wavelet basis function network learning controller for linear brushless dc motors (LBDCM) are considered. Stability robustness with position tracking is the primary concern. The proposed controller deals mainly with external disturbances, e.g. nonlinear friction force and payload variation in motion control of linear motors. It consists of two parts, one is a state feedback component, and the other one is a learning feedback component. The state feedback controller is designed on the basis of a simple linear model, and the learning feedback component is a wavelet neural controller. The attenuation effect of wavelet neural networks on friction force is first verified by the numerical method. The learning effect of wavelet neural networks on friction force is also shown in the numerical results. Then, a wavelet neural network is applied on a real LBDCM to on-line suppress the friction force, which may be variable due to the different lubrication. The effectiveness of the proposed control schemes is demonstrated by simulated and experimental results.     

Performance characteristics of lithium ion cells at low temperatures

The low temperature charge and discharge characteristics of experimental MCMB-Li/sub x/Ni/sub y/Co/sub 1-y/O/sub 2/ cells containing different electrolytes were investigated. The use of low ethylene carbonate (EC)-content electrolyte formulations has resulted in good discharge performance to temperatures as low as -40/spl deg/C. The effect of charge voltage and charge current upon the individual electrode potentials at low temperature was investigated using the three electrode cells (containing lithium reference electrodes). In some cases, lithium plating was observed to occur upon low temperature charge, and found to be facilitated by high charge voltages, high charge currents, and poor anode kinetics. Electrochemical characterization of the cells has helped to establish the conditions under which lithium plating can occur by providing information regarding the polarization effects present at each electrode.     

Sequences and arrays with perfect periodic correlation

Properties and methods for synthesizing sequences with perfect periodic autocorrelation functions and good energy efficiency are discussed. The construction is extended to two-dimensional perfect arrays. The construction methods used are based mainly on a search in the frequency domain and on a multiplication theorem for periodic sequences and arrays     

Improved multilevel quantization for detection of narrowbandsignals

Nearly optimum quantization levels for multileveled quantizers in radar receivers and distributed-detection are calculated for preassigned false-alarm probability Q₀ by maximizing the detection probability Q_d after replacing both Q ₀ and (1-Q_d) by the saddlepoint approximations. Narrowband signals of random phase and with both fixed and Rayleigh-fading amplitudes in Gaussian noise are treated, and the loss in signal detectability incurred by quantization is estimated     

Temporal decorrelation of X-band backscatter from wind-influencedvegetation

The temporal decorrelation characteristics of X-band radar backscatter from wind-influenced vegetation were investigated using a short-range CW radar. Radar reflectance data were gathered on various types of individual trees from a distance of approximately 30 m. The windspeed was monitored during each measurement, which lasted 5 s. The crown cover and the mean leaf area of the trees were also recorded. Autocovariance plots were generated for each measurement, from which the decorrelation time was estimated. As expected, the return signals decorrelated faster at higher wind speeds. However, the decorrelation time was also found to depend on the tree type, tree structure, and leaf cover characteristics. Measured decorrelation times for moderate winds (7-9 m/s) were often between 40-60 ms, although the lowest decorrelation time measured under these conditions was 14 ms for the Eastern Cottonwood. In lighter winds (1-4 m/s), decorrelation times were much longer, and there was substantial spread in the data     

Prebiotic oligodeoxynucleotide synthesis in a cyclic evaporating system at low temperatures.

Deoxynucleoside 5'-monophosphates were condensed by cyanamide or by l-ethyl-3-(3-dimethylaminopropyl) carbodiimide in the presence of ammonium chloride at 0 degree, 37 degrees or 60 degrees C through several cycles of evaporation to dryness with replenishment of all reactants at each cycle. We found that at 37 degrees or 60 degrees cyanamide gives distinctly more high molecular weight material than does carbodiimide. Indeed, the yield of condensed products for the cyanamide reaction (dimers and higher oligomers) was found to be between 60 percent and 80 percent. The molecular weight distribution of the product shifts to higher molecular weights as cycling continues at 37 degrees or 60 degrees for both condensing agents. The water soluble carbodiimide gives higher yields of low molecular weight product but much lower yields of the higher molecular weight products. At 0 degree yields of high molecular weight product were low for both condensing agents. Results of characterization of the products demonstrate the synthesis of oligodeoxynucleotides including tetramers, with 3'-5' phosphodiester linkages.     

Visual thematic mapping from Landsat and collateral data in support of mineral development

Over the past ten years, the authors and their associates have used Landsat images and collateral data to prepare visual thematic maps. The data are used in a projection-compositor (Procom) system that enlarges Landsat images and other data to scales as great as 1:15 000. Revisions of existing maps for simple themes (e.g. topographic maps) can be completed quickly, accurately and inexpensively. Complex themes, such as geological formations and structures, can be mapped through the optical merging of collateral data sets (e.g. Landsat, geophysics, geology) at a common scale. Such mapping has led to the recognition of a non-parallactic means of obtaining whole image stereo-models with large vertical exaggerations using Landsat images.     

Microprocessor smart cards with fingerprint user authentication

Due to the great increase in Information Technology (IT) systems where user authentication is needed, security in those systems relies on using PINs or passwords. During recent years, the scientific community has been trying to improve biometric techniques to be accepted as an alternative to other user authentication schemes. One of the sectors where user identity must be verified, is the identification cards sector. In fact, if great security wants to be achieved, smart cards should be used. But cardholder verification is performed using Card Holder Verification Keys (CHV-Keys), which are PIN-based. The authors are trying to integrate fingerprint verification inside a smart card, following their works in the past. The fingerprint scheme used is shown, and the work to achieve the integration inside a commercial smart card is detailed.