Thrust modulation of solid propellant rockets by a fluidic vortex valve with secondary combustion

An analytical model for calculation of the thrust and pressure modulation of a solid propellant rocket by means of a fluidic vortex valve with secondary combustion has been developed. Thrust control by the vortex valve method was found superior to the axial injection of control flow. Addition of oxygen in the injected flow improves the energetic performance of the system as well as the thrust modulation capability. Experiments have been conducted using a mixture of nitrogen and oxygen as the injection gas. The two main parameters investigated in a series of experiments were the oxygen percentage in the injection gas and the ratio between the mass flow rates of the control gas and the solid propellant combustion products. The results show an increase of thrust by a factor of 2 for a 25% addition in mass flow rate by secondary injection at optimal conditions.     

Removing orbital debris with lasers

Orbital debris in low Earth orbit (LEO) are now sufficiently dense that the use of LEO space is threatened by runaway collision cascading. A problem predicted more than thirty years ago, the threat from debris larger than about 1 cm demands serious attention. A promising proposed solution uses a high power pulsed laser system on the Earth to make plasma jets on the objects, slowing them slightly, and causing them to re-enter and burn up in the atmosphere. In this paper, we reassess this approach in light of recent advances in low-cost, light-weight modular design for large mirrors, calculations of laser-induced orbit changes and in design of repetitive, multi-kilojoules lasers, that build on inertial fusion research. These advances now suggest that laser orbital debris removal (LODR) is the most cost-effective way to mitigate the debris problem. No other solutions have been proposed that address the whole problem of large and small debris. A LODR system will have multiple uses beyond debris removal. International cooperation will be essential for building and operating such a system.     

Auroral electrons

Satellite and rocket measurements of auroral electrons (which have been made since Brown's (1966) and Pfister's (1967) papers have appeared) are reviewed, and the salient characteristics of auroral electrons which emerge from all types of measurements are summarized. Effects of the atmosphere on the energy distribution of electron fluxes are discussed. Ionization rates associated with typical fluxes are derived. Observable effects produced in the atmosphere and the fate of auroral electrons are briefly described.This paper does not discuss the role of auroral protons (or particles). A recent review on the subject has been given by Eather (1967).     

Evaluation of Multipoint Interaction in the Design of a Thin Diffraction-Limited Active Mirror

Active control of a thin, deformable mirror is one approach to obtaining diffraction-limited performance from large orbiting telescopes. The control system design requires knowledge of the mirror reaction to the multiple forces used to maintain the desired mirror figure. A structural analysis program is used to obtain estimates of the static deflections of a point-loaded, thin, shallow, spherical primary mirror. The calculated deflections are compared to experimentally measured deflections for a specific configuration.     

LMC X-4, AO538-66 and surrounding X-ray sources observed with EXOSAT

Repeated observations of LMC X-4 with EXOSAT were carried out in 1983/84 in order to study its 30.5 day cycle and to cover the expected outbursts of the recurrent LMC transient A0538-66. The latter source was inactive during our campaign although a variable circumstellar envelope was still present around the optical counterpart.At least ten further X-ray sources are detected in the CMA field of view around LMC X-4 including the SNR N49 which is the possible site for the March 5, 1979 -ray burster and N63A which appears to be variable in X-ray luminosity. We furthermore discuss the strongest sources that were not present in a previous EINSTEIN survey of the LMC.     

Energetic Particles Investigation (EPI)

The Energetic Particles Investigation (EPI) instrument operates during the pre-entry phase of the Galileo Probe. The major science objective is to study the energetic particle population in the innermost regions of the Jovian magnetosphere — within 4 radii of the cloud tops — and into the upper atmosphere. To achieve these objectives the EPI instrument will make omnidirectional measurements of four different particle species — electrons, protons, alpha-particles, and heavy ions (Z > 2). Intensity profiles with a spatial resolution of about 0.02 Jupiter radii will be recorded. Three different energy range channels are allocated to both electrons and protons to provide a rough estimate of the spectral index of the energy spectra. In addition to the omnidirectional measurements, sectored data will be obtained for certain energy range electrons, protons, and alpha-particles to determine directional anisotropies and particle pitch angle distributions. The detector assembly is a two-element telescope using totally depleted, circular silicon surfacebarrier detectors surrounded by a cylindrical tungsten shielding with a wall thickness of 4.86 g cm^-2. The telescope axis is oriented normal to the spherical surface of the Probe's rear heat shield which is needed for heat protection of the scientific payload during the Probe's entry into the Jovian atmosphere. The material thickness of the heat shield determines the lower energy threshold of the particle species investigated during the Probe's pre-entry phase. The EPI instrument is combined with the Lightning and Radio Emission Detector (LRD) such that the EPI sensor is connected to the LRD/EPI electronic box. In this way, both instruments together only have one interface of the Probe's power, command, and data unit.     

Formation of amino acid precursors in cometary ice environments by cosmic radiation.

Cometary ices are believed to contain water, carbon monoxide, methane and ammonia, and are possible sites for the formation and preservation of organic compounds relating to the origin of life. Cosmic rays, together with ultraviolet light, are among the most effective energy sources for the formation of organic compounds in space. In order to study the possibility of the formation of amino acids in comets or their precursory bodies (interstellar dust grains), several types of ice mixtures made in a cryostat at 10 K ("simulated cometary ices") were irradiated with high energy protons. After irradiation, the volatile products were analyzed with a quadrupole mass spectrometer, while temperature of the cryostat was raised to room temperature. The non-volatile products remaining in the cryostat at room temperature were collected with water. They were acid-hydrolyzed, and analyzed by ion-exchange chromatography. When an ice mixture of carbon monoxide (or methane), ammonia and water was irradiated, some hydrocarbons were formed, and amino acids such as glycine and alanine were detected in the hydrolyzate. These results suggest the possible formation of "amino acid precursors" (compounds yielding amino acids after hydrolysis) in interstellar dust grains by cosmic radiation. We previously reported that amino acid precursors were formed when simulated primitive planetary atmospheres were irradiated with cosmic ray particles. It will be of great interest to compare the amount of bioorganic compounds that were formed in the primitive earth and that brought by comets to the earth.     

PWM full-bridge converter with natural input power factor correction

A pulsewidth modulated (PWM) full-bridge converter that simultaneously performs input power factor correction (PFC) and DC-DC conversion is proposed. The converter is the same as the standard voltage-fed PWM full-bridge converter with a diode-bridge low-pass filter front end, but with a slight modification that results in an improvement in power factor that is sufficient to satisfy the EN61000-3-2 requirements for electrical equipment. The operation of the converter is explained and analyzed, and the results of the analysis are used to determine the converter's steady-state characteristics, which are discussed in detail. A design procedure for the selection of components is then derived and demonstrated with an example. The feasibility of the converter and its ability to satisfy EN61000-3-2 requirements on electrical equipment is shown with results obtained from an experimental prototype.     

Coronal Observations of CMEs

CMEs have been observed for over 30 years with a wide variety of instruments. It is now possible to derive detailed and quantitative information on CME morphology, velocity, acceleration and mass. Flares associated with CMEs are observed in X-rays, and several different radio signatures are also seen. Optical and UV spectra of CMEs both on the disk and at the limb provide velocities along the line of sight and diagnostics for temperature, density and composition. From the vast quantity of data we attempt to synthesize the current state of knowledge of the properties of CMEs, along with some specific observed characteristics that illuminate the physical processes occurring during CME eruption. These include the common three-part structures of CMEs, which is generally attributed to compressed material at the leading edge, a low-density magnetic bubble and dense prominence gas. Signatures of shock waves are seen, but the location of these shocks relative to the other structures and the occurrence rate at the heights where Solar Energetic Particles are produced remains controversial. The relationships among CMEs, Moreton waves, EIT waves, and EUV dimming are also cloudy. The close connection between CMEs and flares suggests that magnetic reconnection plays an important role in CME eruption and evolution. We discuss the evidence for reconnection in current sheets from white-light, X-ray, radio and UV observations. Finally, we summarize the requirements for future instrumentation that might answer the outstanding questions and the opportunities that new space-based and ground-based observatories will provide in the future.     

A permanent lunar base : Alternatives and choices

It appears virtually certain that humans will return to the lunar surface to stay and exploit the lunar resources. The only remaining question is who, when and how humankind will go there to establish a permanent lunar base. This article describes the decision-making process of determining the parameters of a lunar base. It offers modelling options as a frame of reference for planning the lunar base and its logistic support, and gives the reasons why a detailed analysis of the options and forward planning should have a high priority now.