多坐标系下目标跟踪的联合滤波

针对雷达目标观测和处理在不同的坐标系下完成，本文提出了联合滤波算法来跟踪机动目标。该算法以卡尔曼滤波器为基础，直角坐标系下和极坐标系下的算法相联合，不仅克服了两种坐标系下滤波算法的不足，而且对机动目标有很好的跟踪效果。仿真实验结果表明了该算法的有效性。     

新自由主义的社会福利思想

作为当代社会一个重要的理论范式，新自由主义是在与凯恩斯主义的论战中逐步发展起来的。在政治经济领域内，它拒绝国家的干预和控制；在社会福利领域内，它反对福利思想的传播和福利国家的构建，主张通过自由市场机制和个人的自我负责来取代长期由国家提供的社会福利，借以减轻国家的负担，激发个人的进取精神。在新自由主义思想的指引下，英国和美国分别实施了社会福利改革，短期内在减少社会福利开支的同时，也导致了社会福利水平的下降，从长期看，新自由主义的社会福利政策存在着缺陷。     

我国航空企业生产物流系统现状分析与改进

介绍了制造型企业生产物流系统特性 ;分析了我国航空企业生产特点及物流管理的现状 ,针对物流管理上存在的问题 ,提出建立集中下料中心 ,实现物流系统信息管理的方法。     

基于8098单片机的飞行指引系统综合测试装置

介绍一种基于8098单片机的飞行指引系统综合测试装置，给出了飞行指引系统综合测试装置的用途。主要硬件组成和软件设计方法。     

三维喷管设计

为了简化设计过程并获得满意的设计性能，以圆转方和圆转矩形喷管为例，对已有的三维喷管型面设计方法进行比较和总结，运用数值方法分析了型面转换起始位置和喷管出口高宽比的确定，提出了一套三维型面的直接生成方法，并给出相应的设计准则。经过实际设计和加工的检验，证明了设计方法的工艺可行性。在能够保证三维喷管的制造工艺条件以及冷却通道布置要求下，型面转换的起始位置可以尽量接近喉部；喷管出口截面的宽边不要超过窄边的1．5倍，应尽量接近于方形。     

液氮纯度分析的偏差及修正

液氮纯度是液氮产品非常关键的一个技术指标.液氮纯度的在线跟踪测量是通过测量液氮中的氧含量来实现的.在多年来的液氮在线分析及液氮出库分析过程中,发现氧含量测量结果普遍偏低.本文通过理论分析及大量的实验数据,找到了数据产生偏差的原因,并给出了科学的修正办法,为以后液氮生产过程中更加有效地控制产品质量打下了基础.     

CVD-Si3N4陶瓷及其复合材料氧化行为研究进展

概述了CVD—Si3N4陶瓷及其复合材料在干燥氧气下的氧化行为。Si3N4陶瓷在高温下氧化时，除生成SiO2保护膜外，还生成一薄层比SiO2膜更优异的氧气扩散阻挡层(Si—O—N化合物层)，该层具有优异的抗氧化性能。介绍了两种氧化机制模型，同时分析了温度、杂质等对CVD—Si3N4陶瓷氧化行为的影响。     

Magnetosphere Imaging Instrument (MIMI) on the Cassini Mission to Saturn/Titan

The magnetospheric imaging instrument (MIMI) is a neutral and charged particle detection system on the Cassini orbiter spacecraft designed to perform both global imaging and in-situ measurements to study the overall configuration and dynamics of Saturn’s magnetosphere and its interactions with the solar wind, Saturn’s atmosphere, Titan, and the icy satellites. The processes responsible for Saturn’s aurora will be investigated; a search will be performed for substorms at Saturn; and the origins of magnetospheric hot plasmas will be determined. Further, the Jovian magnetosphere and Io torus will be imaged during Jupiter flyby. The investigative approach is twofold. (1) Perform remote sensing of the magnetospheric energetic (E > 7 keV) ion plasmas by detecting and imaging charge-exchange neutrals, created when magnetospheric ions capture electrons from ambient neutral gas. Such escaping neutrals were detected by the Voyager l spacecraft outside Saturn’s magnetosphere and can be used like photons to form images of the emitting regions, as has been demonstrated at Earth. (2) Determine through in-situ measurements the 3-D particle distribution functions including ion composition and charge states (E > 3 keV/e). The combination of in-situ measurements with global images, together with analysis and interpretation techniques that include direct “forward modeling’’ and deconvolution by tomography, is expected to yield a global assessment of magnetospheric structure and dynamics, including (a) magnetospheric ring currents and hot plasma populations, (b) magnetic field distortions, (c) electric field configuration, (d) particle injection boundaries associated with magnetic storms and substorms, and (e) the connection of the magnetosphere to ionospheric altitudes. Titan and its torus will stand out in energetic neutral images throughout the Cassini orbit, and thus serve as a continuous remote probe of ion flux variations near 20R _S (e.g., magnetopause crossings and substorm plasma injections). The Titan exosphere and its cometary interaction with magnetospheric plasmas will be imaged in detail on each flyby. The three principal sensors of MIMI consists of an ion and neutral camera (INCA), a charge–energy–mass-spectrometer (CHEMS) essentially identical to our instrument flown on the ISTP/Geotail spacecraft, and the low energy magnetospheric measurements system (LEMMS), an advanced design of one of our sensors flown on the Galileo spacecraft. The INCA head is a large geometry factor (G ∼ 2.4 cm² sr) foil time-of-flight (TOF) camera that separately registers the incident direction of either energetic neutral atoms (ENA) or ion species (≥5^∘ full width half maximum) over the range 7 keV/nuc < E < 3 MeV/nuc. CHEMS uses electrostatic deflection, TOF, and energy measurement to determine ion energy, charge state, mass, and 3-D anisotropy in the range 3 ≤ E ≤ 220 keV/e with good (∼0.05 cm² sr) sensitivity. LEMMS is a two-ended telescope that measures ions in the range 0.03 ≤ E ≤ 18 MeV and electrons 0.015 ≤ E≤ 0.884 MeV in the forward direction (G ∼ 0.02 cm² sr), while high energy electrons (0.1–5 MeV) and ions (1.6–160 MeV) are measured from the back direction (G ∼ 0.4 cm² sr). The latter are relevant to inner magnetosphere studies of diffusion processes and satellite microsignatures as well as cosmic ray albedo neutron decay (CRAND). Our analyses of Voyager energetic neutral particle and Lyman-α measurements show that INCA will provide statistically significant global magnetospheric images from a distance of ∼60 R _S every 2–3 h (every ∼10 min from ∼20 R _S). Moreover, during Titan flybys, INCA will provide images of the interaction of the Titan exosphere with the Saturn magnetosphere every 1.5 min. Time resolution for charged particle measurements can be < 0.1 s, which is more than adequate for microsignature studies. Data obtained during Venus-2 flyby and Earth swingby in June and August 1999, respectively, and Jupiter flyby in December 2000 to January 2001 show that the instrument is performing well, has made important and heretofore unobtainable measurements in interplanetary space at Jupiter, and will likely obtain high-quality data throughout each orbit of the Cassini mission at Saturn. Sample data from each of the three sensors during the August 18 Earth swingby are shown, including the first ENA image of part of the ring current obtained by an instrument specifically designed for this purpose. Similarily, measurements in cis-Jovian space include the first detailed charge state determination of Iogenic ions and several ENA images of that planet’s magnetosphere.This revised version was published online in July 2005 with a corrected cover date.     

可重复使用运载器磁悬浮助推发射参数研究

针对磁悬浮助推水平起飞运载器这种新型发射概念,采用概念性分析方法,研究地面发射参数对可重复使用运载器性能的影响规律。结果表明,助推发射水平起飞运载器在降低初始推重比、推进剂和结构质量等方面具有优势,最后得出地面发射参数的一组优化值。     

电磁兼容技术

介绍了电磁兼容技术的产生及其发展现状 ,重点介绍了当前的电磁兼容预测技术以及工程实现电磁兼容的主要方法。探讨了电磁兼容领域面临的问题以及当前的主要研究方向。