民用飞机副翼舱结构振动疲劳寿命预计

副翼舱是民用飞机重要部件之一,主要作用为连接副翼并对安装副翼提供支持,将副翼的气动载荷传递到主翼盒上。当受到气动力及其他激励时副翼舱结构产生结构振动响应。副翼舱结构振动疲劳寿命需满足民用飞机适航条款要求,为表明满足适航条款符合性,对随机动载荷激励下副翼舱结构进行振动疲劳寿命预计具有重要意义。以民用飞机副翼舱结构为研究对象,基于试飞实测应变数据、金属材料的随机振动S-N曲线和改进声疲劳寿命估算法,提出了一种适用于振动疲劳寿命预计的工程处理方法。通过飞行试验、有限元仿真、数据分析等相结合的方法进行副翼舱结构优化前后的振动疲劳寿命预计。副翼舱结构优化前损伤位置预测寿命最低为59飞行小时,符合实际损伤位置寿命情况。副翼舱结构优化后应力水平明显降低,寿命满足要求。结果表明：基于实测数据的副翼舱结构振动疲劳寿命预计方法有效,可作为振动疲劳寿命预计的工程处理方法。     

一种涡轮发动机加速控制规律设计的新方法

 提出了一种涡喷、涡扇发动机加速控制规律快速设计的新方法：在发动机稳态特性计算模型的基础上,通过额外增加转子提取功率,使得发动机稳态工作点（线）靠近喘振边界,在同时考虑燃烧室富油熄火边界、涡轮进口总温限制以及压气机喘振裕度限制的条件下,利用适当的控制规律描述形式并结合发动机工程研制中的经验,能够快速而准确地获得涡喷、涡扇发动机加速控制规律。对某型涡喷发动机加速控制规律的改进的计算结果表明,提出的加速控制规律的设计方法准确而有效。     

等离子体涡电磁散射特性及隐身性能

 针对非均匀等离子体在飞行器隐身中的应用,采用分段线性电流密度递归卷积时域有限差分（PLJERC-FDTD）方法计算等离子体涡及涡串电磁散射特性,分析等离子体涡对飞行器隐身性能影响。计算表明,等离子体涡在很大频率区间对电磁波吸收效果显著,RCS降低很大,具有明显的隐身效果。等离子体涡表现出一定规律性的极化特性,对L,S和C波段电磁波具有不同的吸收、反射特性。     

基于物理规划的高超声速飞行器滑翔式再入轨迹优化

 轨迹优化是新型高超声速滑翔式再入飞行器方案设计的关键技术之一。物理规划方法能够以较低的计算代价获得设计者偏好的多目标优化问题的折中解。基于该方法研究滑翔式再入最优飞行轨迹。首先介绍物理规划方法求解多目标优化问题的数学模型,然后将考虑射程最大、热载最小、热流密度峰值最小和弹道最稳定4个目标的再入最优轨迹问题纳入物理规划的框架求解。以某带翼锥形再入飞行器为例,通过计算并分析单目标优化结果,确定具体的偏好结构,采用遗传算法求解了考虑热流、过载、动压和终端条件约束的多目标最优轨迹。优化计算结果验证了物理规划方法的有效性。分析了沿最优轨迹飞行的物理原因和基本迎角控制规律,可为滑翔式再入飞行器的最优轨迹方案设计提供依据。     

单一压力容器镍氢电池组几何参数对其温度场的影响

 针对实际空间用单一压力容器(IPV)镍氢电池组的传热特点,建立其瞬态热分析的数学物理仿真模型。通过设计改变电池组几何参数,包括电池组底板厚度、套筒高度和厚度,采用有限差分法,对比模拟研究电池组在飞船实际运行条件下几何参数对其温度场的影响。结果表明：套筒厚度对电池组温度场的影响最为敏感,增大套筒厚度可明显缩短电池组热系统达到平衡态的响应时间;其次是套筒高度;改变底板厚度对电池组温度场变化影响不明显。该研究为镍氢电池组的结构优化和热控制研究提供理论基础。     

Overloading of Landing Based on the Deformation of the Lunar Lander

Along with the progress of sciences and technologies, a lot of explorations are taken in many countries or organizations in succession. Lunar, the natural satellite of the earth, become a focus of the space discovery again recently because of its abundant resource and high value in use. Lunar exploration is also one of the most important projects in China. A primary objective of the probe in lunar is to soft-land a manned spacecraft on the lunar surface. The soft-landing system is the key composition of the lunar lander. In the overall design of lunar lander, the analysis of touchdown dynamics during landing stage is an important work. The rigid-flexible coupling dynamics of a system with flexible cantilevers attached to the main lander is analyzed. The equations are derived from the subsystem method. Results show that the deformations of cantilevers have considerable effect on the overloading of the lunar lander system.     

金属橡胶减振器用于发动机安装减振的研究

 为减小发动机传递至飞机机身结构的振动,设计了金属橡胶减振器用于航空发动机安装。对该金属橡胶减振器进行了动力学建模研究,采用有限元技术对安装减振器前后的飞机全机结构进行了仿真分析,初步表明了该设计对结构频率影响较小,但能引入较大阻尼,降低响应水平。在理论分析基础上,进一步将设计制造的金属橡胶减振器安装于某型飞机,进行地面开车,实测了应用减振安装前后飞机的动力学响应。结果证明了发动机减振安装的可行性与有效性。     

基于预测脱靶量的远程拦截速度增益导引

 针对拦截器使用耗尽关机固体燃料发动机的情况,设计了大气层外目标拦截的速度增益导引方法。导引律中根据Lambert导引确定指令推力方向初值,利用剩余速度增量信息,计算惯性速度增益下的预测脱靶量,使用Kepler轨道摄动方程计算消除脱靶量所需的速度增益修正,根据惯性速度增益和速度增益修正之和确定指令推力方向。给出了一种计及J2项引力摄动影响的滑行段弹道预测半解析方法,减少导引律运算量,降低导引方法误差;导引律中引入了剩余速度增量测量环节,增强了导引精度对推进系统参数的鲁棒性。与传统的通用能量管理（GEM）导引相比,采用该导引律拦截远程目标时指令推力方向平稳、变化范围小,脱靶量降低了两个数量级。     

Comparative analysis of four different single-frequency PPP models on positioning performance and atmosphere delay retrieval

Single-frequency precise point positioning (SF-PPP) has attracted increasing attention due to its high precision and cost effectiveness. With various strategies to handle the dominant error, i.e., ionosphere delay, the ionosphere-float (IF), ionosphere-free-half (IFH), ionosphere-corrected (IC), and ionosphere-weighted (IW) SF-PPP models are certain to possess different characteristics and performance levels. This study is dedicated to assessing and comparing the four models from model characteristics, positioning performance, and atmosphere delay retrieval. The model comparison shows that IC and IW models are full-rank while IF and IFH models have a rank deficiency of size one that will result in biased estimations, which means the better solvability of IC and IW models. The experiments are carried out based on the 7-day Global Positioning System (GPS) observations collected at 57 global Multi-GNSS Experiment (MGEX) stations and Global Ionosphere Map (GIM) products. The results indicate that the IW model can accelerate SF-PPP convergence and achieve higher positioning accuracy compared to the other three SF-PPP models, especially in kinematic mode. With convergence criteria of 0.25 m in horizontal and 0.5 m in vertical, the east/north/up convergence times of IW model are 0.5/15.0/25.0 min and 0.5/16.0/36.5 min for static and kinematic modes, respectively. The IW model is able to achieve an instantaneous positioning accuracy of 0.28/0.35/0.75 m. In addition, a real kinematic test also demonstrates the best positioning solutions of IW model. Regarding troposphere delay retrieval, the IF, IFH, and IW models obtain a comparable daily accuracy of 3.0 cm on average, while the IC model achieves the worst accuracy of 8.0 cm. For precise ionosphere delay estimation, IW model only needs an average initialization time of 34.3 min, but a longer initialization time of 51.6 min is required for IF model. The daily precision of ionosphere delay estimation for IW model can reach up to 10.8 cm. At the present accuracy of GIM products, it is suggested that the IW model should be adopted for SF-PPP first due to its superior performance in positioning and atmosphere delay retrieval.     

硅橡胶基防热涂层动态烧蚀行为及机理研究

针对两种典型硅橡胶基防热涂层开展高温燃气流烧蚀实验，通过对烧蚀后涂层的宏观及微观形貌分析，探讨了其防隔热机理及烧蚀模型。研究结果表明：烧蚀后两种涂层均存在液态层、陶瓷层、热解层以及原始层；烧蚀过程中甲基苯基硅橡胶涂层主要发生主链“回咬”成环反应，导致树脂基体交联密度降低，力学性能下降，涂层外表面发生开裂，甲基乙烯基硅橡胶涂层则主要发生侧基交联反应，使树脂基体交联密度上升，促进涂层发生陶瓷化转变；热辐射、热容吸热、热解反应吸热以及热阻塞效应为四种主要的热耗散机制，质量损失产生的原因主要包括反应气体释放以及气动剪切力导致的机械剥蚀。