Overloading of Landing Based on the Deformation of the Lunar Lander

Along with the progress of sciences and technologies, a lot of explorations are taken in many countries or organizations in succession. Lunar, the natural satellite of the earth, become a focus of the space discovery again recently because of its abundant resource and high value in use. Lunar exploration is also one of the most important projects in China. A primary objective of the probe in lunar is to soft-land a manned spacecraft on the lunar surface. The soft-landing system is the key composition of the lunar lander. In the overall design of lunar lander, the analysis of touchdown dynamics during landing stage is an important work. The rigid-flexible coupling dynamics of a system with flexible cantilevers attached to the main lander is analyzed. The equations are derived from the subsystem method. Results show that the deformations of cantilevers have considerable effect on the overloading of the lunar lander system.     

用试验粒子法求有外磁场影响时准平衡态下的等离子体气体的散射功率谱

本文应用Rosenbluth和Rostoker提出的试验粒子迭加原理,但采取与其不同的数学方法,推导出与其他作者相同结果的有外磁场影响时准平衡态下的等离子体气体的散射功率谱。本文仍从伏拉索夫方程和泊松方程出发,但采用解微分方程和反复作傅里叶变换的途径。本方法的关键是通过卷积定理把电子浓度涨落的时间自相关函数与能通过带电粒子的无干扰轨道直接计算出来的函数(这里有图片19820407-312-1.GIF)联系起来。过程较为简明,物理意义清楚。     

机载天线RCS减缩及其布局设计

机载天线系统是飞机的强散射源之一,对飞机隐身性能有着重要的影响。本文针对国外第四代战斗机机载天线系统的设计与布局,研究了具有低散射特性的机载天线系统设计技术措施,讨论了其机理和效能。对机载天线系统进行雷达散射截面积(Radar cross section,RCS)减缩设计与布局,在保证系统性能的同时,有效降低其RCS。     

双向进气结构脉管制冷机直流形成机理

在脉管制冷机中,由双向进气结构诱发的直流流动,不仅会增加冷端换热器的负载,降低制冷机性能,而且还是引起制冷温度不稳定的重要原因。如何有效地抑制直流流动已成为脉管制冷机能否大规模应用的关键。而对直流形成机理进行全面、深入的研究是发展简单、有效直流抑制手段的前提。针对该研究热点,本文开展了双向进气结构脉管制冷机直流形成机理研究,基于流体网络理论,考察工质物性对直流的影响和作用机理,进一步揭示了直流的形成本质。     

跳跃式跨大气层飞行弹道仿真分析

针对跳跃式跨大气层飞行弹道的特殊性,建立了其飞行动力学模型,在此基础上,对其弹道进行了仿真分析,得知乘波构型是跳跃式跨大气层飞行器理想气动布局,研究对比了跳跃弹道和惯性弹道的不同性能,结果表明跳跃飞行具有惯性飞行所无法比拟的突防能力。所得结论对跳跃式跨大气层飞行和未来新型武器装备的发展方向的研究具有一定的参考价值。     

PREDICTION OF SURFACE ROUGHNESS FOR END MILLING TITANIUM ALLOY USING MODIFIED PARTICLE SWARM OPTIMIZATION LS-SVM

It is difficult to construct the prediction model for titanium alloy through analyzing the formation mecha- nism of surface roughness due to the complicated relation between influential factors and surface roughness. A no- vel algorithm based on the modified particle swarm optimization （PSO） least square support vector machine （LS- SVM） is proposed to predict the roughness of the end milling titanium alloys. According to Taguchi method and features in milling titanium alloys, the influences of cutting speed, feed rate and axial depth of cut on surface roughness are investigated with the analysis of variance （ANOVA） of the experimental data. The research results show that the construction speed of the modified PSO LS-SVM model is two orders of magnitude faster than that of back propagation（BP） model. Moreover, the prediction accuracy is about one order of magnitude higher than that of BP model. The modified PSO LS-SVM prediction model can explain the influences of cutting speed, feed rate and axial depth of cut on the surface roughness of titanium alloys. Either a higher cutting speed, a lower feed rate or a smaller axial depth of cut can lead to the decrease of surface roughness.     

一种活性环氧增韧固化剂性能分析

以壬基酚和甲醛所形成的二聚体为原料,合成了一种新型结构的环氧固化剂双(2-羟基-3 -胺乙基胺甲基-5-壬基苯基)甲烷(BA),利用红外光谱(IR)、核磁共振谱(1HNMR)表征了产物结构.通过差 示扫描量热(DSC)研究了该固化剂的反应活性,确定固化剂最佳质量分数为43.19%.固化 树脂动态力学分析(DMA)表明,由于BA分子结构中存在正壬基,固化后会发生β- 松弛, 能够提高树脂韧性.力学性能测试发现BA固化树脂的冲击强度比普通芳香胺固化树脂提高了 36.91％,证明BA具有高活性和增韧双重效果.      

Charged-particle mutagenesis II. Mutagenic effects of high energy charged particles in normal human fibroblasts.

The biological effects of high LET charged particles are a subject of great concern with regard to the prediction of radiation risk in space. In this report, mutagenic effects of high LET charged particles are quantitatively measured using primary cultures of human skin fibroblasts, and the spectrum of induced mutations are analyzed. The LET of the charged particles ranged from 25 KeV/micrometer to 975 KeV/micrometer with particle energy (on the cells) between 94-603 MeV/u. The X-chromosome linked hypoxanthine guanine phosphoribosyl transferase (hprt) locus was used as the target gene. Exposure to these high LET charged particles resulted in exponential survival curves; whereas, mutation induction was fitted by a linear model. The Relative Biological Effect (RBE) for cell-killing ranged from 3.73 to 1.25, while that for mutant induction ranged from 5.74 to 0.48. Maximum RBE values were obtained at the LET of 150 keV/micrometer. The inactivation cross-section (alpha i) and the action cross-section for mutant induction (alpha m) ranged from 2.2 to 92.0 micrometer2 and 0.09 to 5.56 x 10(-3) micrometer2, respectively. The maximum values were obtained by 56Fe with an LET of 200 keV/micrometer. The mutagenicity (alpha m/alpha i) ranged from 2.05 to 7.99 x 10(-5) with the maximum value at 150 keV/micrometer. Furthermore, molecular analysis of mutants induced by charged particles indicates that higher LET beams are more likely to cause larger deletions in the hprt locus.     

飞行器气动-隐身综合性能评估的灰关联度分析模型

 采用结构化网格和求解Navier-Stokes方程的方法,进行了无人机和巡航导弹气动性能计算,并数值模拟了其气动流场,所得结果与工程实际现象吻合;分别建立了无人机和巡航导弹的曲面及面劈模型,根据GRECO-WM方法,计算了其表面全向雷达散射截面(RCS)值;基于灰色系统的灰关联度分析理论,提出了气动-隐身综合性能的量化评判模型,并对2种无人机和3种巡航导弹的综合性能进行了评价,得到了对工程设计具有参考价值的结论。     

Computer Optimization of FM/FM Telemetry Systems

In this correspondence, the threshold carrier power of FM/FM systems and the receiver IF bandwidth are optimized through a computer program. For a typical set of IRIG (inter-range instrumentation group) channels, it is demonstrated that the required carrier signal-to-noise ratio can be as low as 5 dB (much less than the conventional 12 dB value) in order to maintain the subcarrier signal-to-noise ratio at 12 dB, the threshold level. comparison of the optimized and the conventional taper analysis is tabulated.