Parametric Modeling of Circuit Model for AC Glow Discharge in Air

In the parametric modeling of the circuit model for glow discharge in air,a new method for the design of glow discharge circuit model is presented.The new circuit model is an important reference for the design of plasma power supply,the simulation of glow discharge plasma actuator and the simulation of glow discharge plasma anemometer.The modeling approach consists in developing an electrical model of the glow discharge in air based on circuit components.The structure of the circuit model is established according to the theoretical analysis and the experimental device.Then the parameters of the circuit model are obtained based on the circuit analysis.Finally,the circuit model is verified by comparing the simulation current with the experimental current.This model takes into account the whole framework of the air glow discharge including the sheath and the plasma area.The built circuit model is feasible and reliable,thus being instructive for the investigation of the glow discharge in air.     

Predicting performance in manually controlled rendezvous and docking through spatial abilities

Manually controlled rendezvous and docking (manual RVD) is a challenging space task for astronauts. This study aims to identify spatial abilities that are critical for accomplishing manual RVD. Based on task analysis, spatial abilities were deduced to be critical for accomplishing manual RVD. 15 Male participants performed manual RVD task simulations and spatial ability tests (the object-manipulation spatial ability and spatial orientation ability). Participants’ performance in the test of visualization of viewpoints (which measures the spatial orientation ability) was found to be significantly correlated with their manual RVD performance, indicating that the spatial orientation ability in the sense of perspective taking is particularly important for accomplishing manual RVD.     

Analysis on Output Power for Multi-direction Piezoelectric Vibration Energy Harvester

To predict the performance of multi-direction piezoelectric vibration energy harvester,an equation for calculating its output power is obtained based on elastic mechanics theory and piezoelectricity theory.Experiments are performed to verify theoretical analysis.When the excitation direction is along Y direction,a maximal output power about 0.139 mW can be harvested at a resistive load of 65kΩ and an excitation frequency of 136 Hz.Theoretical analysis agrees well with experimental results.Furthermore,the performance of multi-direction vibration energy harvester is experimentally tested.The results show that the multi-direction vibration energy harvester can harvest perfect energy as the excitation direction changes in XY plane,YZ plane,XZ plane and body diagonal plane of the harvester.     

基于子阵级非周期的有限扫描阵列研究

对基于子阵级非周期的有限扫描阵列进行研究,采用数值仿真和遗传算法对基于不同子阵规模的非周期阵列进行优化设计,分析4?4和2?2两种子阵规模对接收多波束应用中伴随波束方向图的影响,研究表明子阵规模过大会引起伴随波束方向图的旁瓣抬升,通过减小子阵规模可以避免该问题,论证了设计的基于2?2子阵的非周期八角阵可应用于有限视场扫描相控阵中。     

Orbit determination and prediction of GEO satellite of BeiDou during repositioning maneuver

In order to establish a continuous GEO satellite orbit during repositioning maneuvers, a suitable maneuver force model has been established associated with an optimal orbit determination method and strategy. A continuous increasing acceleration is established by constructing a constant force that is equivalent to the pulse force, with the mass of the satellite decreasing throughout maneuver. This acceleration can be added to other accelerations, such as solar radiation, to obtain the continuous acceleration of the satellite. The orbit determination method and strategy are illuminated, with subsequent assessment of the orbit being determined and predicted accordingly. The orbit of the GEO satellite during repositioning maneuver can be determined and predicted by using C-Band pseudo-range observations of the BeiDou GEO satellite with COSPAR ID 2010-001A in 2011 and 2012. The results indicate that observations before maneuver do affect orbit determination and prediction, and should therefore be selected appropriately. A more precise orbit and prediction can be obtained compared to common short arc methods when observations starting 1 day prior the maneuver and 2 h after the maneuver are adopted in POD (Precise Orbit Determination). The achieved URE (User Range Error) under non-consideration of satellite clock errors is better than 2 m within the first 2 h after maneuver, and less than 3 m for further 2 h of orbit prediction.     

DZ22B高温合金定向凝固叶片铸造缺陷的形成机理研究

采用SEM、EDS等分析手段研究了DZ22B镍基高温合金定向凝固涡轮叶片不同区域铸造缺陷的特点及其形成原因。结果表明,裂纹缺陷主要分布在叶身的中上部位,其形成机理主要归因于叶片在凝固过程中的共晶组织过多;而疏松缺陷分布在叶身和缘板部位,产生在枝晶间共晶组织附近。枝晶间距小补缩不足和反应生成的CO气体未及时排除是疏松形成的两大原因。     

Electron density inversed by plasma lines induced by suprathermal electron in the ionospheric modification experiment

Incoherent scatter radar (ISR) is the most powerful ground-based measurement facility to study the ionosphere. The plasma lines are not routinely detected by the incoherent scatter radar due to the low intensity, which falls below the measured spectral noise level of the incoherent scatter radar. The plasma lines are occasionally enhanced by suprathermal electrons through the Landau damping process and detectable to the incoherent scatter radar. In this study, by using the European Incoherent Scatter Association (EISCAT) UHF incoherent scatter radar, the experiment observation presents that the enhanced plasma lines were observed. These plasma lines were considered as manifest of the suprathermal electrons generated by the high-frequency heating wave during the ionospheric modification. The electron density profile is also obtained from the enhanced plasma lines. This study can be a promising technique for obtaining the accurate electron density during ionospheric modification experiment.     

Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film photoresist

The application of surface textures has been employed to improve the tribological performance of various mechanical components. Various techniques have been used for the application of surface textures such as micro-dimple arrays, but the fabrication of such arrays on cylindrical inner surfaces remains a challenge. In this study, a dry-film photoresist is used as a mask during through-mask electrochemical micromachining to successfully prepare micro-dimple arrays with dimples 94 lm in diameter and 22.7 lm deep on cylindrical inner surfaces, with a machining time of 9 s and an applied voltage of 8 V. The versatility of this method is demonstrated, as are its potential low cost and high efficiency. It is also shown that for a fixed dimple depth, a smaller dimple diameter can be obtained using a combination of lower current density and longer machining time in a passivating sodium nitrate electrolyte.     

海洋大气环境下微动开关触点回跳时间增大故障的试验复现与分析

结合某型微动开关触点回跳时间增大导致某系统故障问题,设计了由干湿交替酸性盐雾试验和湿热试验组成的海洋大气环境效应加速模拟试验剖面,选取与外场故障件型号一致的微动开关为研究对象,通过实验室加速模拟试验,成功复现了外场故障现象,并结合试验结果对腐蚀性环境、电烧蚀等因素对触点回跳时间增大的影响机制进行了分析。