Investigation of the infrared characteristics of the rocket nozzle

Investigation of the infrared characteristics of a rocket nozzle is very important for the study of infrared initiating technology. The Narrow-Band Zone model is developed for that purpose. The spectral transmission and absorption factors are introduced, and the equations between radiative heat flux and the temperature of waill surfaces and gas are developed. The radiative heat transfer in one axisymmetric cylindrical enclosure filled with homogeneous radiative participating medium is computed with the Narrow-Band Zone model and compared with those in the reference documents. The comparison shows good agreement. The radiative heat transfer to the nozzle of one rocket engine is also calculated with the Narrow-Band Zone model, and the outgoing radiative energy flux and energy rate integrated in a mid-wave infrared band 2-6 pm, a long-wave infrared band 8-14 pm and the full wave band are analyzed. The following conclusions can be derived: the spectral radiation from the inlet and outlet of the nozzle show apparent spectral discontinuity, which appears greater in the 2.7-2.95 pm than in the neighboring wave band. The spectral outgoing radiative energy flux of nozzle wail is similar to that of gray body, which decreases with wavelength in 2-14 pm. The outgoing radiative energy flux on the nozzle wall is greater in the cylindrical and contracting section of nozzle, but smaller in the divergent section, which is determined by temperature. The nozzle of the rocket engine radiates most energy in the mid-wave surfaces by absorption. The most important feature of gas radiation is the strong selection of the waveband, so the detailed study of the infrared characteristics of nozzle of the rocket engine should be carried out on narrow-band computation.     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.     

一种折叠弹翼悬挂物的分离轨迹试验技术

提出了一种新的折叠弹翼悬挂物机弹分离轨迹试验技术,重点解决了在机弹分离过程中折叠弹翼动态展开时悬挂物的气动力获取问题。研究表明,提出的试验技术通过将悬挂物气动力修正方法引入到悬挂物分离安全性研究当中,准确地得到悬挂物的分离特性,解决了折叠弹翼悬挂物分离轨迹风洞试验技术瓶颈,为折叠弹翼悬挂物的投放分离安全性提供一套工程实用的解决方案。     

精密电阻自动考核筛选装置的研制

介绍一种智能型的精密电阻自动考核筛选装置，解决了考核筛选精密电阻时繁重的重复性劳动，并保证了电阻测量的准确性，该装置还可应用于筛选考核稳压块等具有温度系数的器件。     

Further results on adaptive filtering with embedded CFAR

Among the few known adaptive filtering algorithms which have an embedded (integrated) constant false alarm rate (CFAR) performance feature, the generalized likelihood ratio (GLR) test algorithm has been found to be robust in non-Gaussian clutter. This paper examines the detection performance of the GLR algorithm in nonhomogeneous/nonstationary clutter environments which lead to nonidentical distribution of secondary (training) data. For two common types of nonhomogeneity, i.e., the so-called “signal contamination” and “clutter edge”, the asymptotic detection performance is derived and compared with simulations. These asymptotic results are relatively simple to use and they predict the GLR performance in nonhomogeneous environments quite well. The GLR performance loss due to the nonhomogeneity is also evaluated. It is found that the “generalized angle” between the desired and contaminating signal plays an important role in the study of the effects of signal contamination. It is also found that the performance degradation due to the clutter edge depends largely on the width of the clutter spectrum and target-clutter Doppler separation     

多功能实验室环境条件保障装置的设计

介绍了维持计量检定工作环境条件保障装置的设计方法，该装置可实现实验室温，湿度的测量与控制，有方便的通讯接口便于与计算机连接，并附加有多点时间控制电路以实现提前预热仪器设备提高工作效率的功能。     

战斗机滚转姿态快速性研究

介绍了战斗机中等幅度滚转姿态快速性的定义，应用欧拉法对19种飞机构形的滚转快速性进行了仿真计算．其结果与地面模拟战斗机攻击机动试验相比较，表明滚转姿态快速性与滚转模态时间常数、滚转操纵效能、副翼操纵速率和控制系统增益等飞行品质要求密切相关，飞行品质标准MIL—STD—1797没有完全涵盖中等幅度滚转姿态变化的要求。     

Study of ionospheric D region changes during solar flares using MF radar measurements

During solar flares, the X-ray radiation suddenly increases, resulting in an increase in the electron density of the atmospheric D region and a strong absorption of short-wave radio waves. Based on Langfang medium frequency (MF) radar, this paper analyzed the variation characteristics of D region in the lower ionosphere from 62 km to 82 km. The analysis focused on multiple C-level and M-level solar flare events before and after the large-scale flare event at 11:53 (UT) on September 6, 2017. The results show that it is difficult to detect the electron density over 70 km in Langfang during solar flares, but the electron density value can be obtained as low as 62 km, and the stronger the flare intensity, the lower the detectable electron density height. Besides, the equal electron density height, the received power of X and O waves will also be significantly reduced during the flares, and the reduction of equal electron density height has a weak linear relationship with flare intensity.     

航天器姿态预设性能控制方法综述

针对存在不确定惯量矩阵及其它未知不确定性(如执行器故障、航天器结构发生突变等)下的航天器姿态控制问题，综述了预设性能控制及其应用的研究进展。首先阐释了预设性能控制方法的基本内涵及其关键步骤；然后分析总结了现有航天器姿态控制以及预设性能控制研究的基本概况与发展趋势；最后面向未来复杂化、智能化的空间任务对航天器控制系统提出的新需求，提出航天器预设性能控制值得研究的问题和方向。     

航空发动机全飞行包线稳态划分方法研究

航空发动机在鲁棒控制器设计过程中存在飞行包线区域难以系统划分的问题,为此,提出基于推力耗油率特性和基于动压耗油率特性的航空发动机飞行包线划分法。根据某型涡扇发动机在全包线范围内稳态工作时的推力、耗油率及动压特性,结合大气条件的客观规律,通过两种划分方法将飞行包线划分为65 个区域,用每个区域对应标称点的参数代替其周围小偏差区域和边界点参数。通过对该发动机全包线内各区域标称点与边界点参数的对比,证明两种方法均对全飞行包线划分有效,可为后续航空发动机控制器设计提供理论基础。