风险价值法VaR在产品质量风险管理中的应用

随着经济体制改革的深化，为新兴企业带来新的发展机遇，同时也给企业发展带来新的风险，对风险进行有效的管理，是企业生存发展之本。本文对风险衡量方法中的风险价值VaR法进行了简单阐述，以某机械加工厂的曲轴和连杆质量风险管理为例，根据其质量问题引发的赔偿数据建立风险量化模型，推导出企业在一段时间内的预期损失，据此可以调整风险管理的措施，做到利润最大化。     

基于循环平稳性的噪声调频干扰高分辨测向方法

根据噪声调频信号循环平稳特性分析,提出了基于阵列接收信号循环均值-空域处理的波达方向(DOA)估计算法。仿真结果表明:该算法的角度估计性能明显高于比幅比相单脉冲测角法,且在高信噪比环境中,该法的估计性能更好、运算量较小。     

基于实用参数控制的翼型参数化方法

在翼型的优化设计中,通常要对二元翼型进行参数化方法表示,其目标是利用较少的参数得到足够大的设计空间。分析了Hicks-Henne型函数叠加法和PARSEC几何参数法的特点和不足,提出了利用厚度、弯度等实用参数进行翼型定义的方法,该方法可以通过厚度和弯度参数更加直观地理解翼型轮廓和翼型基本气动性能。通过分析3种方法对5种翼型的最小二乘拟合结果得出结论:实用参数法的误差分布比较平均,且能够比另外两种方法更精确地表示翼型。     

ASW-RTS:一种软件性能数据在线检测方法

在软件健康管理系统中,需要对相关被测构件的性能进行在线检测,从而确定构件的健康状态。针对被测构件的性能衰退检测问题,在AR(p)模型基础上,结合时间序列滚动式算法的准确性,提出了一种具有自适性策略的ASWRTS算法,用于对被测构件革新异常类性能数据的在线检测,提高检测的准确度,并基于该算法设计了构件性能异常数据的在线检测过程。实验结果表明,该算法将检测精度提高了50%左右,能够有效在线检测构件的性能衰退,说明了该算法的正确性和有效性。     

浅议教材建设质量监控体系的构建

提高教材质量是教材建设的永恒主题,而完善的教材建设质量监控体系是确保教材质量不断提高的重要保证。本文通过借鉴先进的全面质量管理理论,引入ISO9000族质量标准体系,构建切合实际、科学合理、先进实用的教材建设质量监控体系。     

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

铝合金含硅量的测定方法

Ｎ２Ｏ－Ｃ２Ｈ２原子吸收光谱法测定卫星系统电池外壳铝合金中的硅含量。讨论了燃烧器高度、燃助比、共振线等测定条件的选择方法，以及酸度、温度和Ｎ２Ｏ－Ｃ２Ｈ２火焰区对测定精度的影响。实际应用证明，该方法灵敏度高，干扰小，选择性和重复性好，并具有操作简便，易掌握，分析周期短等特点；精密度和准确度均能满足卫星系统电池外壳体研制的要求。     

圆截面曲线管道内二次流动的Galerkin解

本文推导了曲线直角坐标系内的Ｎ－Ｓ方程。结果表明Ｇａｌｅｒｋｉｎ方法可以克服摄动法的小参数局限，得到了纯数值法无法求得的增 解析解。     

Aerodynamic optimization design for high pressure turbines based on the adjoint approach

A first study on the continuous adjoint formulation for aerodynamic optimization design of high pressure turbines based on S2surface governed by the Euler equations with source terms is presented.The objective function is defined as an integral function along the boundaries,and the adjoint equations and the boundary conditions are derived by introducing the adjoint variable vectors.The gradient expression of the objective function then includes only the terms related to physical shape variations.The numerical solution of the adjoint equation is conducted by a finitedifference method with the Jameson spatial scheme employing the first and the third order dissipative fluxes.A gradient-based aerodynamic optimization system is established by integrating the blade stagger angles,the stacking lines and the passage perturbation parameterization with the quasi-Newton method of Broyden–Fletcher–Goldfarb–Shanno(BFGS).The application of the continuous adjoint method is validated through a single stage high pressure turbine optimization case.The adiabatic efficiency increases from 0.8875 to 0.8931,whilst the mass flow rate and the pressure ratio remain almost unchanged.The optimization design is shown to reduce the passage vortex loss as well as the mixing loss due to the cooling air injection.     

基于全局Newton-Raphaon方法的弹流润滑分析

基于全局Newton-Raphaon方法对滑动轴承的弹流润滑性能进行了数值摸拟。比较了弹性变形对连杆大头轴承最小油膜厚度和最大油膜压力的影响。结果表明:全局Newton-Raphaon方法很好的解决了收敛困难,程序运行时间长的问题;考虑表面弹性变形的连杆大头轴承与刚性轴承相比,最小油膜厚度与最大油膜压力的变化趋势相同;一个工作循环内,弹性轴承的最小油膜厚度略大于刚性轴承,而最大油膜压力则明显减小。