High Excitation ISM and Gas

An overview is given of ISO results on regions of high excitation ISM and gas, i.e. HII regions, the Galactic Centre and Supernova Remnants. IR emission due to fine-structure lines, molecular hydrogen, silicates, polycyclic aromatic hydrocarbons and dust are summarised, their diagnostic capabilities illustrated and their implications highlighted. Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands, and the United Kingdom), and with the participation of ISAS and NASA.     

相变光盘的介质优选及理论计算

 本文着重论述相变光盘的存储机理、介质优选、理论计算及光存储最新进展。     

Analysis of Multimodal Systems

The estimation of a multimodal linear system whose mode-to-mode transitions are described by a finite-state Markov chain is described. The problem has application in studying separation standards in an air traffic control environment. An optimal solution is formulated which is computationally infeasible. A suboptimal estimator is then derived which closely approximates the optimal estimator. An example is presented to illustrate the technique.     

高密度喷气燃料与常规喷气燃料浓度场试验研究

本文利用ＣＯ２红外气体分析仪和取样管对高密度喷燃料和常规喷气燃料在直流喷嘴下游的浓度场分布进行了测量，就气流速度，油压降和下游距离对浓度场分布的影响进行了对比研究。试验结果表明，在相同工况下，常规喷气燃料的最大浓度值比高密度喷气燃料的大；气流速度和油压变化对高密度喷气燃料最大浓度点穿透深度的影响大于对常规喷气燃料的影响。     

Finite-dimensional filters with nonlinear drift. V: solution to Kolmogorov equation arising from linear filtering with non-Gaussian initial condition

Despite its usefulness, the Kalman-Bucy filter is not perfect. One of its weaknesses is that it needs a Gaussian assumption on the initial data. Recently Yau and Yau introduced a new direct method to solve the estimation problem for linear filtering with non-Gaussian initial data. They factored the problem into two parts: (1) the on-line solution of a finite system of ordinary differential equations (ODEs), and (2) the off-line calculation of the Kolmogorov equation. Here we derive an explicit closed-form solution of the Kolmogorov equation. We also give some properties and conduct a numerical study of the solution.     

测量旋涡脱落频率的实验研究

本文提出了一种由表面摩擦测量旋涡脱落频率的方法,阐述了其原理,给出了实验研究的结果,可作为涡街式流量计测量旋涡脱落频率的一种途径。     

Interference between FM Carriers and a Digitally Modulated SCPC Circuit

The interference from the digital single channel per carrier (SCPC) circuits into frequency-modulated carrier systems has been calculated by convolving the desired and the interfering spectra extending the previously published works. Resulting interference noise power in FDM/FM systems covering a wide range of modulation indices and basebands has been presnted. Also plots of interference noise power as a function of the number of SCPC circuits have been presented for various values of carrier power to interference power ratios.     

Satellite fault diagnosis using a bank of interacting Kalman filters

The main objective of this work is development and testing of a detection, isolation, and diagnosis algorithm based on interacting multiple model (IMM) filters for both partial (soft) and total (hard) reaction wheels faults in a spacecraft. This is shown to be accomplished under a number of different faulty mode scenarios for these actuators associated with the attitude control system (ACS) of a satellite. Various operating and faulty conditions due to changes and anomalies in the temperature, the power supply line voltage, and the loss of effectiveness of the torque and the current are considered in each reaction wheel associated with the three axes of the satellite. Once a fault mode is detected and isolated the recovery procedure can subsequently be engaged by invoking appropriate switching control strategies for the ACS. The application of a bank of interacting multiple Kalman filters for detection and diagnosis of anticipated reaction wheel failures in the ACS is described and developed. Compared with other model-based fault detection, diagnosis and isolation(FDDI) strategies developed in the control systems literature, our FDDI strategy is shown, through extensive numerical simulations, to be more accurate and robust with potential for extension to a number of other application areas.     

热暴露对B/Al复合材料性能的影响

对经300℃、500℃高温热暴露的B／Al（LF6）复合材料的力学性能进行了研究，实验结果表明材料在300℃下热暴露时，性能下降速度较慢，100h后强度保留率约为76％，延伸率保留率为74％。而在500℃下热暴露时，5h以上强度就有明显降低。高温长时间热暴露后复合材料的断裂也从积累型转变为典型的非累积型断裂。通过透射电镜（TEM）及扫描电镜（SEM）对固态热压制造态和主温热暴露的界面状况进行了分析，认为界面反应是造成B／Al复合材料力学性能下降的主要原因。     

基于CFD技术的鼻腔输药的流动特性研究

鼻腔输药作为一种新颖的输药方式,具有方便可靠的特点,不仅可以适用于局部而且适用于全身用药,已经受到广泛的重视。但由于人类的呼吸道复杂的立体结构使得鼻腔输药成为生物医药研究的一个长期的挑战。利用CFD(计算流体动力学,Computational Fluid Dynamics)技术对鼻腔输药的流动特性进行研究,对一个基于真实的人类鼻腔解剖的3D模型的输药的流动过程进行了分析,着重研究了不同的药物颗粒的流动和沉淀特性。利用CFD的商用软件FLUENT在层流情况下对不同的密度、直径和流动速率的药物颗粒在鼻腔中流动进行了数值模拟,并对计算结果进行了比较分析。CFD研究的结果为鼻腔输药这种新颖的药物输送方式的优化设计提供了依据。