大耀斑期间向日面电离层总电子含量的响应个例分析

利用2001年4月15日1336UT耀斑爆发期间向日面GPS观测数据提取的总电子含量的时间变化曲线。分析了向日面电离层对这次耀斑的响应特点．结果表明，耀斑期间向日面电离层出现了总电子含量突增事件．最大总电子含量增加量约为2．6TECU，在0600LT和1800LT都观测到了总电子含量突增，世增加幅度仅为0．5-1TECU．在高纬地区，由于电离层闪烁，从TEC时间变化曲线提取不出来总电子含量增加值．从各卫星星下点处的TEC增加量和各星下点处的太阳天顶角的关系可以看到，TEC增加量与太阳天顶角有关，太阳天顶角越大，TEC增幅越小。另外，从总电子含量时间变化率曲线上还观测到了时间同步的小尺度扰动，通过与耀斑期间硬X射线辐射通量的比较，发现两者有明显的相关性，电离层中的这种扰动与耀斑期间的硬X射线或远紫外辐射有关．     

一种自动优化的三角形有限元网格生成技术

提出了一种自动优化和三角形有限元网格生成方法，这种方法可以给出最佳的单元形态和节点分布方式，非常有利于提高有限元分析的精度和节约计算机内存及机时，该法已经应用于固体火箭发动机燃烧稳定性预估，并取得了良好的结果。由计算结果证明，该法正确，有效和实用。     

基于矩阵的装配过程建模方法

装配型生产是一种典型的离散型生产,装配生产过程是装配状态在装配作业的驱动下不断发生转移而持续更新至完成状态的一个过程,本文提出了一种基于矩阵运算的装配过程建模方法,对这种由装配状态转移组织起来的生产过程进行了建模。文中给出了装配作业、装配状态以及作业有序关系等元素对象的矩阵表示方法;以矩阵的运算过程来表述生产流程,包括作业可操作性测试、装配状态转移、作业有序矩阵更新等;产品结构的层次性使得装配过程也会具有一定的层次性,对装配过程进行子装配划分,用分块矩阵表达装配过程与其子装配之间的层次关系,建立分层的装配过程模型。该模型通过装配过程的矩阵表示,最终可获得装配体的可行装配序列,为装配序列选优提供数据基础。     

A machine learning approach to crater detection from topographic data

Craters are distinctive features on the surfaces of most terrestrial planets. Craters reveal the relative ages of surface units and provide information on surface geology. Extracting craters is one of the fundamental tasks in planetary research. Although many automated crater detection algorithms have been developed to exact craters from image or topographic data, most of them are applicable only in particular regions, and only a few can be widely used, especially in complex surface settings. In this study, we present a machine learning approach to crater detection from topographic data. This approach includes two steps: detecting square regions which contain one crater with the use of a boosting algorithm and delineating the rims of the crater in each square region by local terrain analysis and circular Hough transform. A new variant of Haar-like features (scaled Haar-like features) is proposed and combined with traditional Haar-like features and local binary pattern features to enhance the performance of the classifier. Experimental results with the use of Mars topographic data demonstrate that the developed approach can significantly decrease the false positive detection rate while maintaining a relatively high true positive detection rate even in challenging sites.     

High energy charged particle experiment – A payload proposal to KuaFu-B mission

High Energy Charged Particle Experiment (HECPE) is to measure the fluxes of MeV electrons and tens of MeV protons. The two satellites of KuaFu-B are in the same polar orbit with apogee 7.0R_E, perigee 1.8R_E. They can sweep large L values and pass through the inner and outer radiation belts. The high energy electrons and protons in the radiation belts are principal sources for failures of satellites and spacecrafts in the Earth orbits. The enhancements of the high energy electrons and protons, so-called energetic particle events, are important phenomena of the Space Weather. The energy ranges monitored by HECPE are 0.3–0.5 MeV, 0.5–1.0 MeV, 1.0–2.0 MeV, and E > 2.0 MeV for electrons, 5–10 MeV, 10–20 MeV, 20–40 MeV, and 40–80 MeV for protons.     

二元柔壁自修正风洞研究

本文简要叙述西北工业大学开展二元柔壁自修正风洞研究的情况以及所取得的结果。着重介绍了西北工业大学二元柔壁自修正风洞的参政选取以及自修正风洞试验技术的研究工作,如迭代试验方法的确定,一步法的研究等。同时提出了对今后开展自修正风洞研究的建议。     

Remaining useful life prognostics for aeroengine based on superstatistics and information fusion

Remaining useful life（RUL） prognostics is a fundamental premise to perform conditionbased maintenance（CBM） for a system subject to performance degradation. Over the past decades,research has been conducted in RUL prognostics for aeroengine. However, most of the prognostics technologies and methods simply base on single parameter, making it hard to demonstrate the specific characteristics of its degradation. To solve such problems, this paper proposes a novel approach to predict RUL by means of superstatistics and information fusion. The performance degradation evolution of the engine is modeled by fusing multiple monitoring parameters, which manifest non-stationary characteristics while degrading. With the obtained degradation curve,prognostics model can be established by state-space method, and then RUL can be estimated when the time-varying parameters of the model are predicted and updated through Kalman filtering algorithm. By this method, the non-stationary degradation of each parameter is represented, and multiple monitoring parameters are incorporated, both contributing to the final prognostics. A case study shows that this approach enables satisfactory prediction evolution and achieves a markedly better prognosis of RUL.     

Galileo系统与GPS卫星定位系统相位组合观测值的模型研究

在介绍Galileo系统空间信号的基础上,以模糊度保持整数为前提,给出了Galileo系统的4个频率载波与GPS L2载波的组合相位观测值的定义,并对有关误差影响加以分析,最后根据一定的组合标准论述了具有相应特性的组合观测值,并给出一些典型的组合.      

低功率霍尔推力器束流发散和推力矢量偏心特性研究

为了准确掌握不同工况下混合励磁模式低功率霍尔推力器束流发散和推力矢量偏心特性，凭借自主设计和改进的一套快速评估霍尔推力器束流发散角和推力矢量偏角原位集成诊断装置，系统研究了推力器在不同阳极质量流率、磁场、电场下束流分布和推力矢量偏心特性的变化规律。结果表明，束流发散角随阳极质量流率（0.65mg/s~0.95mg/s）和磁场强度（112Gs~142Gs）的变化呈现负相关的特性。当阳极质量流率0.95mg/s，束流发散角降到29.1°（＜30°）。推力矢量偏角随阳极质量流率和磁场强度的变化分别存在极大值（1.19°）和极小值（0.91°）。束流发散角、推力矢量偏角在250V~330V放电电压范围内基本保持不变。