新型精密狭缝的设计

介绍了一种基于弹性铰链的精密狭缝的设计，加工工艺要求和性能测试结果。根据实际需要，狭缝可以采用水冷结构。     

Stability of resonance rotation of a satellite with respect to its center of mass in the orbit plane

The stability of resonance oscillations and rotations of a satellite in the plane of its orbit in the case when the difference of the moments of inertia with respect to the principal axes lying in the orbit plane is small is determined at a given rotation number m by the sign of function Φ_m(e), introduced by F.L. Chernous’ko in 1963. In this paper, convenient analytical representations of functions Φ_m(e) are described in the form of integrals and series of Bessel functions regular at e → 1^?. Values of Φ_m(1) are calculated in explicit form. A theorem about the double asymptotic form of functions Φ_m(e) at m → ∞ and e → 1^? is proved by the saddlepoint method.     

质量管理体系建设必须与企业发展战略相适应

提出了质量管理体系建设中存在的问题和解决途径,对不同企业发展战略的质量管理体系进行了比较,指出了质量管理体系建设必须与企业发展战略相适应。     

Dose equivalent, absorbed dose and charge spectrum investigation in low Earth orbit.

Particle intensity, dose equivalent and absorbed dose have been measured on board the space shuttle Endeavour during STS-108 in December 2001 by Dublin Institute for Advanced Studies (DIAS). The dose estimates are based on very accurate measurements of recoils produced in CR-39 by cosmic ray primary and secondary protons and heavier nuclei and by secondary neutrons. The corresponding LET spectra were used to determine dose equivalent and absorbed dose values. Estimates of the total flux of Z > or = 2 nuclei have been undertaken and a preliminary charge spectrum was measured. Some comparisons are made with preliminary data obtained on STS-105 (ISS Expedition) and other missions using CR-39 detectors.     

精密机械零件的统计尺寸公差

精密机械产品的发展要求具有高性能、高可靠性和高质量。如果用设计时减小公关的方法来保证精度，则将难以解决加工和装配中产生的问题。因此需要在采用尽可能大的公差值的民政部下满足精度一文将讨论一些实例，寻找借助于统计尺寸公差降低加工精度要求的办法。     

用于高压动态校准的快开阀装置

介绍一种高压快开阀装置。它可产生３７０ＭＰａ上升时间小于２０μｓ的阶跃压力，用于对高压传感器进行动态校准。     

通用仪器接口总线标准及软件技术的发展

叙述了通用仪器接口总线标准和软件技术的现状和未来。介绍了ＧＰＩＢ、ＶＸＩ总线，程控仪器校准命令和虚拟仪器，给出了ＧＰＩＢ标准关系图，ＧＰＩＢ软件结构以及虚拟仪器框图。     

一种新型的微机补偿晶体振荡器及开发系统

提出了一种新型的以微处理器为核心的AT切温度补偿晶体振荡器 (MCXO)的设计思想 ,说明了其开发系统的原理 ,给出了最后的实验结果。使用该开发系统得到的这种振荡器可以工作在 - 40℃～ 85℃的环境内 ,频率—温度稳定性≤± 5× 10 - 7。     

The finite element approximation of vector fields in curvilinear coordinates

We demonstrate that it is possible to express each component of the displacement vector for the interior point of the finite element (FE) through all components of nodal unknowns in curvilinear coordinates. The effectiveness of the valid technique of vector approximation for displacement fields has been verified on an example.     

一种新的六端口测量系统自校准方法

提出了一种新的六端口自校准方法.本方法从六端口相对功率理论出发,导出了六端口系统常数的自校准方程,给出了求解系统常数初值的方法,并利用梯度法对方程组求解,仿真结果表明用一个匹配负载、四个失配负载就可以解出系统常数.