Progress of microgravity material research during the period of 2007—2009

Orbital experimental researches on crystal growth of Mn-doped GaSb and Bi2Se0.21Te2.79 are briefly summarized. The space experiments were completed in September of 2007 on broad the Foton-M3 satellite of Russia. Ground-based researches on the solidification behaviors of Al-Al3Ni, Al-Al2Cu, Ag-Cu eutectic, Al-Pb monotectic and Cu-Co peritectic alloys in a 50-meter-high drop tube were investigated. New experimental results on the ultrasonic field and the temperature recycling induced to chiral symmetry breaking of NaClO3 crystal also were reported in the present paper.      

TiAl金属间化合物缺口断裂性能

 TiAl合金作为准脆性材料,在其服役过程中由于缺口的存在使得断裂对缺口非常敏感,严重降低了其使用性能,因此需要研究TiAl合金在缺口作用下的断裂性能。采用带缺口的组合拉伸试样研究了温度和拉伸速率对具有近全片层组织Ti-48Al-2Cr-2Nb合金缺口断裂性能的影响。结果表明,室温下TiAl合金对缺口非常敏感,随着温度的升高,TiAl合金对缺口敏感性降低,当温度为800 ℃时,TiAl合金对缺口不敏感。TiAl合金在低温区塑性变形是通过位错滑移和变形孪晶引起的,高温下是由扩散控制的位错攀移作用引起的。研究还表明,200 ℃下拉伸速率较低时TiAl合金对缺口不敏感,当拉伸速率增加到较高时,TiAl合金对缺口很敏感。     

微细丝上气泡射流间的相互作用特性

实验考察微细加热丝上气泡射流间的相互作用现象,发现相邻气泡射流间的相互吸引现象,强相互作用时多股射流可以合并成一股射流.分析揭示出气泡射流间相互吸引的物理机制在于,气泡生长造成局部温度下降导致相邻气泡两侧的热毛细力不均衡,进而引起两个气泡射流间的相互吸引,而相邻气泡则有互相远离的趋势.利用数值模拟给出了气泡射流系统的温度场和流场,很好地验证气泡射流间相互吸引的物理机制.      

单航过单平台InSAR基线模型的敏感性分析

从单航过单平台InSAR系统对其自身基线的高精度需求出发,给出了光学测量方案下的基线模型,并针对模型中的各因素及其误差来源,进行了模型的敏感性分析,阐明了测量元素与位置修正矢量的基线矢量的误差传递关系,然后根据误差传递关系找出测量系统的优化安装部位。通过解析推导得出各类误差源在不同条件下对基线精度影响的理论结果,由仿真分析给出了不同安装部位的误差传递系数。通过敏感性分析可由测量环境的输入条件直接获得基线的误差量级,其结果可作为指导测量系统方案设计与精度分配的参考依据。     

基于希尔伯特-黄算法瞬时测频的DSP实现

文章阐述了希尔伯特-黄瞬时测频技术的基本原理,介绍了希尔伯特．黄瞬时测频算法的DSP软件实现,包括系统软件设计框架介绍、子系统任务划分、DSP／BIOS的应用、BOOT模块、数据处理模块和HPI模块等内容,并给出了实际系统的性能分析。     

金属增材制造技术应用于军用飞机维修保障浅析

金属增材制造技术的发展为军用飞机维修保障提供了一条数字化、定制化、高性能、短周期的技术新途径,可提升军用飞机维修保障的技术水平和能力。本文综述了军用飞机维修保障的国内外现状,指出了金属增材制造技术的应用优势,介绍了军用飞机零件的典型损伤形式、不同增材制造工艺的适用性及修复工艺选取方案,分析了所涉及的逆向建模、结构优化、智能机器人等关键技术,详述了目前存在的技术成熟度与可靠性不高、修复原则不明确、标准规范不统一等主要问题及解决措施,指出了增材制造技术在军用飞机维修保障领域未来的发展方向和趋势,并给出了具体的应用建议。     

弹丸旋转空气动力效应非定常数值模拟

准确计算马格努斯力和力矩对旋转弹箭设计、弹道计算和稳定性研究都至关重要。采用非定常雷诺平均Navier-Stokes(RANS)方程对高速旋转的SOCBT弹丸进行了数值模拟,纵向气动特性在整个攻角范围内都较好地与试验值保持一致,而侧向气动特性马格努斯力和力矩在小攻角范围与试验数据吻合较好,在大攻角范围却存在一定的差异。采用延迟分离涡模拟(DDES)方法的计算结果有较为明显的改善,对比研究表明分离点位置对马格努斯效应有着显著影响。表明DDES方法对于提高旋转弹箭马格努斯效应的数值模拟精度有较大的潜力。     

一种复杂环境下的无线应急通信中继节点快速布点方法

无线应急通信作为综合应急保障体系的重要组成部分,在应对洪水、地震、海啸等自然灾害时有着传统网络无可比拟的便捷性和经济型.中继节点作为无线中继网络的关键环节,其选址将直接影响整个应急通信网络的性能.复杂环境无线应急通信中继节点选址依靠现场实地调查和测量,但会存在选址速度慢、中继节点冗余和通信链路质量差等问题.针对以往这些...     

A method of multi-objective reliability tolerance design for electronic circuits

Tolerance design plays an important role in reliability design for electronic circuits. The traditional method only focuses on the consistency of output response. It is not able to meet the needs of increasing development of electronic products. This paper researches the state of related fields and proposes a method of multi-objective reliability tolerance design. The characteristics of output response and operating stresses on critical components are both defined as design objectives. Critical components and their operating stresses are determined by failure mode and effect analysis (FMEA) and fault tree analysis (FTA). Sensitivity analysis is carried out to determine sensitive parameters that affect the design objectives significantly. Monte Carlo and worst-case analysis are utilized to explore the tolerance levels of sensitive parameters. Design of experiment and regression analysis are applied in this method. The optimal tolerance levels are selected in accord with a quality-cost model to improve consistency of output response and reduce failure rates of critical components synchronously. The application in light-emitting diode (LED) drivers indicates details and potential. It shows that the proposed method provides a more effective way to improve performance and reliability of electronic circuits.     

Autonomous navigation to quasi-periodic orbits near translunar libration points

Libration-point missions have been very useful and successful. Due to the unstable nat-ures of most of these orbits, the long-time stationkeeping demands frequent maneuvers and precise orbit determinat...