仿生光磁导航技术发展研究综述

仿生导航是在仿生技术基础上发展起来的新型导航技术方法,该方法融合了仿生技术的优点,因其抗干扰性强、适应范围广的特点,迎来了研究的热潮。从仿生光流导航、仿生偏振光导航、仿生类脑导航和仿生地磁导航四个角度对近年来大量的相关文献进行了综合性地整理和分析,阐述了其导航原理、发展现状和动态,对其未来的发展前景进行了展望,指出了限制现有技术的难点和瓶颈,对未来仿生导航技术的发展提供了参考,有一定的指导作用。     

基于压电纤维复合材料的航天器动力学建模与振动抑制

压电纤维复合材料(MFC)在柔性航天器的振动主动抑制中具有很好的应用前景。利用哈密顿原理和压电驱动的载荷比拟方法,建立了带MFC压电驱动的离散形式的刚柔耦合动力学方程,采用线性二次型最优控制(LQR)算法进行主动控制。结果表明：在航天器的柔性体受到脉冲载荷激励条件下,使用MFC驱动器可以实现航天器挠性振动的快速抑制,并且同时保持中心刚体姿态的稳定性,即能够实现挠性振动与姿态运动的协同控制。基于MFC的主动控制方法对于高频响应也具有较好的控制效果。对于柔性占优的航天器,采用MFC的主动控制优于被动控制。本文方法在处理具有复杂柔性体的航天器时更具优势,更适合于工程应用。     

纤维织物超高速碰撞热-力学模型与分析

A new thermo mechanical model for fiber fabric of hypervelocity impact is established by using the Johnson Cook model, the Gruneisen equation of state and the FEM SPH coupling algorithm, while some new factors are taken into account such as the heat generation, strain rate strengthening and high temperature softening of materials. Mechanical and thermal information could be obtained with the model, such as penetration, fragmentation, stress and strain, heat generation and temperature field of fiber fabric. The analysis results are in good agreement with the experimental results.     

基于伴随方法的单级低速压气机气动设计优化

采用梯度方法对某型4.5级压气机最后级进行气动设计优化研究，梯度由连续伴随方法计算确定，多排伴随方程采用伴随掺混面模型进行数值求解。首先，采用基于经验修正的初步设计方法设计带进口导叶的4.5级低速、低压缩比压气机的原始气动外形。之后，在压气机近失速工况对最后级静子叶片进行伴随气动设计优化，通过优化叶型和安装角降低流动损失，目标函数定义为加权求和形式的熵增和流量偏差，优化中对流量进行约束。最后，开展基于伴随方法的多工况气动设计优化研究，改善两个不同转速条件下最后级的气动性能。优化结果表明，基于伴随方法的多排气动设计优化可以通过改变叶片气动外形提升多排全工况气动性能。     

电动式磁悬浮动量球电磁场耦合分析

本文针对电动式磁悬浮动量球(Electrodynamic suspension reaction sphere, EDSRS)的电磁场耦合进行分析，采用定子绕组的感应电动势评判耦合强度，提出了耦合强度评判指标，作为EDSRS的结构设计约束，以降低电磁场耦合的影响。首先，结合EDSRS的具体结构特点，对多定子之间的电磁场耦合问题进行分析，采用定子电磁场在另一个定子绕组中产生的感应电动势评判耦合强度。然后，对感应电动势产生规律进行分析，提出了耦合强度评判指标，并基于所提评判指标，建立了耦合约束验证流程，作为EDSRS的结构设计约束，最后，通过有限元仿真和实验验证了上述电磁场耦合分析。     

Application of Wuhan Ionospheric Oblique Backscattering Sounding System (WIOBSS) for the investigation of midlatitude ionospheric irregularities

An upgrade of Wuhan Ionospheric Backscattering Sounding System (WIOBSS) was developed in 2015. Based on the Universal Serial Bus (USB), and a high performance FPGA, the newly designed WIOBSS has a completely digital structure, which makes it portable and flexible. Two identical WIOBSSs, which were situated at Mile (24.31°N, 103.39°E) and Puer (22.74°N, 101.05°E) respectively, were used to investigate the ionospheric irregularities. The comparisons of group distance, Doppler shift and width between Mile-Puer and Puer-Mile VHF ionospheric propagation paths indicate that the reciprocity of the irregularities is satisfied at midlatitude region. The WIOBSS is robust in the detection of ionospheric irregularities.     

A holistic approach to SIM platform and its application to early-warning satellite system

This study proposes a new simulation platform named Simulation Integrated Management (SIM) for the analysis of parallel and distributed systems. The platform eases the process of designing and testing both applications and architectures. The main characteristics of SIM are flexibility, scalability, and expandability. To improve the efficiency of project development, new models of early-warning satellite system were designed based on the SIM platform. Finally, through a series of experiments, the correctness of SIM platform and the aforementioned early-warning satellite models was validated, and the systematical analyses for the orbital determination precision of the ballistic missile during its entire flight process were presented, as well as the deviation of the launch/landing point. Furthermore, the causes of deviation and prevention methods will be fully explained. The simulation platform and the models will lay the foundations for further validations of autonomy technology in space attack-defense architecture research.     

航天器近距离交会的固定时间终端滑模控制

针对航天器近距离交会段的位置姿态耦合控制问题，假设航天器受外界干扰且目标航天器存在空间自由翻滚情形时，基于固定时间概念设计了一种六自由度位姿终端滑模自适应控制器，通过引入显含正弦函数的切换项来避免奇异问题。此外所设计的控制器含双幂次项，不仅能全局提高姿态和位置的跟踪速度及精度，还能估计系统稳定所需的时间上界，且该上界与状态初始值无关。基于Lyapunov方法分析了闭环系统的固定时间稳定性。仿真结果表明，该控制器能快速实现对航天器近距离交会时相对位置和姿态的控制，具有较高的精度和良好的干扰抑制能力。     

Multi-objective Optimization of Differential Steering System of Electric Vehicle with Motorized Wheels

A differential steering system is presented for electric vehicle with motorized wheels and a dynamic model of three-freedom car is built. Based on these models, the quantitative expressions of the road feel, sensitivity, and operation stability of the steering are derived. Then, according to the features of multi-constrained optimization of multi-objective function, a multi-island genetic algorithm （MIGA） is designed. Taking the road feel and the sensi- tivity of the steering as optimization objectives and the operation stability of the steering as a constraint, the system parameters are optimized. The simulation results show that the system optimized with MIGA can improve the steering road feel, and guarantee the operation stability and steering sensibility.