新型弹簧床结构的HAN基发动机技术

为改善硝酸羟胺(HAN)基发动机催化剂在长时间工作的工况下容易发生破碎而产生空穴的现象，本文提出一种新型弹簧床结构发动机设计方法，对发动机催化床进行改进优化设计。该设计可实现，常温环境下弹簧所提供的最大弹力不足以压碎催化剂；同时在高温环境下，弹簧的最小弹力足以克服催化床受到的流动阻力，可大幅提高发动机工作寿命、性能和可靠性。为验证该设计方法的有效性，分别开展了传统结构和新型弹簧床结构的HAN基1N发动机温启动试验。试验结果表明：在相同试验条件下，传统结构1N发动机温启动次数不超过150次，而使用新型弹簧床结构的1N发动机温启动次数超过了500次，且工作性能更优。试验结果证明了该设计方法的有效性，为HAN基发动机长寿命可靠工作奠定了良好的技术基础。     

计量项目招标浅论

简述了开展计量项目招标的意义，内容，特点，条件及程序。     

多元高温合金固溶极限预测

综合考虑了溶质元素与基体元素的原子半径、电负性以及外层电子数的立方根对溶质元素固溶度的影响，推导出二元合金的固溶度定量方程，提出了多元高温合金固溶极限曲线的预测新方法，并将其应用于计算镍基和钴基三元合金相图的γ／（γ＋σ）相界和γ（γ＋μ）相界。结果表明，计算的固溶极限曲线与已知相图的固溶极限曲线较吻合，与Ｍｄ值法计算的相界比较，该方法具有较高的精度。     

Simulation study on slant-to-vertical deviation in two dimensional TEC mapping over the ionosphere equatorial anomaly

With the rapid increase of GPS/GNSS receivers being deployed and operated in China, real-time GPS data from nearly a thousand sites are available at the National Center for Space Weather, China Meteorology Administration. However, it is challenging to generate a high-quality regional total electron content (TEC) map with the traditional two-dimensional (2-D) retrieval scheme because a large horizontal gradient has been reported over east–south Asia due to the northern equatorial ionization anomaly. We developed an Ionosphere Data Assimilation Analysis System (IDAAS), which is described in this study, using an International Reference Ionosphere (IRI) model as the background and applying a Kalman filter for updated observations. The IDAAS can reconstruct a three-dimensional ionosphere with the GPS slant TEC. The inverse slant TEC correlates well with observations both for GPS sites involved in the reconstruction and sites that are not involved. Based on the IDAAS, simulations were performed to investigate the deviation relative to the slant-to-vertical conversion (STV). The results indicate that the relative deviation induced by slant-to-vertical conversion may be significant in certain instances, and the deviation varies from 0% to 40% when the elevation decreases from 90° to 15°, while the relative IDAAS deviation is much smaller and varies from −5% to 15% without an elevation dependence. Compared with ‘true TEC’ map derived from the model, there is large difference in STV TEC map but no obvious discrepancy in IDAAS map. Generally, the IDAAS TEC map is much closer to the “true TEC” than is STV TEC map is.     

基于乙炔基封端酰亚胺和氰酸酯树脂的互穿网络聚合物

以2，3，3'，4'-联苯四甲酸二酐和2，2'-双三氟甲基-4，4'-联苯二胺为单体、4-乙炔基邻苯二甲酸酐为封端剂合成了不同聚合度的聚酰亚胺低聚物（BETI），将其溶于双氛A型氰酸酯单体制备了改性氰酸酯树脂，对改性氰酸酯树脂的固化行为进行了详细探究，并对其固化物的热学性能、力学性能和介电性能等进行了表征与分析。结果表明:BETI对氰酸酯树脂的聚合有明显的催化作用，可以降低固化温度，缩短凝胶时间。基于BETI和氰酸酯树脂的互穿网络聚合物（IPN）的热性能和力学性能与纯氰酸酯树脂相比都有一定的提高。当加入质量分数30%、聚合度为19的BETI树脂时，固化物的玻璃化转变温度从297 ℃提高到309 ℃，热失重5%时温度从425 ℃提高到了431 ℃；拉伸强度从76 MPa提高到了94 MPa，冲击强度从24 kJ/m2℃提高到了31 kJ/m2。加入BETI后，聚合物的介电常数稍稍高于纯氰酸酯树脂。由于具有良好工艺性和材料性能，BETI改性氰酸酯树脂可作为基体树脂应用于航空航天等领域。      

基于图书借阅信息的学生工作管理系统

SQL Server数据库实现数据库服务器的构建,利用自定义函数以及相应的查询语句完成图书借阅信息的分类统计,然后,通过WEB端开发,根据评价指标体系,显示评价结果;班主任依据评价结果,制定风险预案,提前关注风险指数高的学生,来实现对学生课外表现的评价,该系统对学生工作管理提供了有力保障。     

A parameterized geometry design method for inward turning inlet compatible waverider

Intensive studies have been carried out on generations of waverider geometry and hypersonic inlet geometry. However, integration efforts of waverider and related air-intake system are restricted majorly around the X43A-like or conical flow field induced configuration, which adopts mainly the two-dimensional air-breathing technology and limits the judicious visions of developing new aerodynamic profiles for hypersonic designers. A novel design approach for integrating the inward turning inlet with the traditional parameterized waverider is proposed. The proposed method is an alternative means to produce a compatible configuration by linking the off-the-shelf results on both traditional waverider techniques and inward turning inlet techniques. A series of geometry generations and optimization solutions is proposed to enhance the lift-to-drag ratio. A quantitative but efficient aerodynamic performance evaluation approach （the hypersonic flow panel method） with lower computational cost is employed to play the role of objective function for opti- mization purpose. The produced geometry compatibility with a computational fluid dynamics （CFD） solver is also verified for detailed flow field investigation. Optimization results and other numerical validations are obtained for the feasibility demonstration of the proposed method.     

空域拥挤风险管理时间决策模型与方法

针对目前日益严重的空域拥挤现象,缺乏有效的空域拥挤风险管理机制,造成拥挤难以应对等问题,建立了空域拥挤风险预测模型、空域拥挤风险解决模型和风险损失成本模型。采用风险预测模型和解决模型预测可能产生空域拥挤的时段、提出不同时段的实施流量管理策略,基于风险损失成本模型给出了不同时段调整拥挤的运行成本,通过比较运行成本和空域拥挤风险管理决策方法确定出解决空域拥挤的最佳时间点。采用实际运行数据进行验证,结果表明:所建立的空域拥挤预测模型、空域拥挤风险解决模型、风险损失成本模型和空域拥挤风险管理时间决策方法能有效地预测未来空域发生拥挤的时段,迅速找到运行成本最小的调整拥挤的时间点,为空中交通流量动态管理提供了新途径。     

自适应严格收敛非奇异终端滑模制导律

针对机动目标的末制导拦截问题，设计了一种带终端角度约束的有限时间收敛终端滑模制导律。首先，分析了现有非奇异终端滑模制导律存在的滑模面不能严格有限时间收敛的问题，进而构造了一种新型的非奇异终端滑模面。其次，设计了一种对目标机动上界的自适应估计，提出了一种自适应严格收敛非奇异终端滑模制导律的设计方法。最后，基于Lyapunov稳定性理论，证明了设计的制导律能够使得制导系统在有限时间内收敛到零，并且保证了滑模面在收敛过程中不存在非收敛因子，是严格有限时间收敛的。仿真实验验证了该制导律能够有效地拦截机动目标，同时和与现有的非奇异终端滑模制导律以及基于转换滑模面的非奇异制导律相比，拦截时间更短，终端攻击角度精度更高，导弹机动消耗的能量更少。