Strength design model for thin-walled structures

In this paper, the finite element analysis of the stress-strain state for cylindrical structures is discussed. In this case, various fundamental hypotheses can be used in the framework of a model that is of interest for design and optimization. Numerical examples are presented to evaluate the possibilities of this model.     

惯性平台系统摇摆条件下的漂移处理方法

惯性平台在摇摆条件下,由于轴端摩擦力矩的存在,导致在摇摆运动时影 响平台稳定性,引起平台各轴附加常值漂移。介绍了两种惯性平台摇摆条件下的漂移处 理方法, 第一种方法利用平台轴端框架角传感器的输出数据, 首先使用离散傅里叶变 换得到数据频谱, 其次根据数据频谱设计数字滤波器, 对得到的数据进行滤波处理, 最后使用线性回归法对滤波后的数据进行拟合, 从而得到摇摆条件下平台摇摆漂移; 第二种方法使用加速度计的输出, 根据敏感的加速度可以得到敏感轴与重力加速度的 角度, 由此计算出摇摆过程的漂移速度。实验表明, 频谱分析法可以进行三个方向的 计算, 但台体轴结果的稳定性不好; 加速度输出拟合方法虽只可进行两个方向的计 算,但稳定性较好。     

EBAA：An efficient broadcast authentication scheme for ADS-B communication based on IBS-MR

Automatic dependent surveillance-broadcast （ADS-B） systems can broadcast satellitebased aircraft position, identification, etc., periodically, and are now on track to replace radar to become the backbone of next-generation air traffic management （ATM） systems. However, ADS-B systems suffer severe cyber-security problems due to the broadcast-type data link and the lack of designed-in security measures. Especially, since ADS-B messages are unauthenticated, it is easy to insert fake aircraft into a system via spoofing or insertion of false messages. Unfortu- nately, the authentication for ADS-B messages has not yet been well studied. In this paper, based on identity-based signature with message recovery （IBS-MR）, an efficient broadcast authentication scheme for ADS-B messages is proposed. The security analysis demonstrates that the scheme can achieve authenticity and integrity of ADS-B broadcast messages, as well as adaptive evolution of broadcasters＇ private keys. The performance evaluation shows that the scheme is computationally efficient for typical avionics devices with limited resources. Furthermore, the scheme achieves low communication overhead since broadcast messages can be recovered from signatures, and thus it is suitable for low-bandwidth ADS-B data link.     

喷射角对超声速燃烧室掺混和燃烧的影响

针对壁面喷射方式,分别在冷态喷流和燃烧工况下探讨了喷射角的变化对超声速流场中的燃料掺混效果及燃烧效率的影响。研究表明:采用带角度喷射能明显减弱壁面垂直喷射导致的强激波,减小激波/边界层干扰带来的总压损失,在燃料掺混特性方面,减小喷射角会降低近场穿透距离,减弱近场的掺混效果,而对中场的穿透深度及掺混效果影响不大,但带角度喷射的远场的穿透深度及掺混不如垂直喷射。所以垂直喷射时,虽然更多的燃料和空气发生掺混,燃烧效率要高于带角度喷射的,但会以牺牲很大的总压为代价,所以在工程中建议采用带角度喷射配合其他喷射方式。     

美军军事训练/教学系统开发模型综述及特点分析

通过对美军军事训练教学系统采办指导手册(MIL-HDBK-1379)的分析,介绍了美军军事训练系统采办方法ISD/SAT的概念及其运作模型,并对ISD/SAT的工作过程及其特点作了简要分析.     

飞行阶段预防性维修风险识别和控制方法

运用头脑风暴法和层次分析法,对飞行四个阶段中航空维修出现的预防性维修风险进行识别和控制,并以机械日机务准备活动为案例进行分析,经实践验证,此方法可消除或降低飞行阶段航空维修过程中出现的预防性维修风险发生的概率,为其它机型开展此项工作奠定基础。     

FERA in parameter identification with application in low speed wind tunnel test

This paper presents a new approach which consists of a fuzzified eigensystem realization algorithm (FERA) to identify the parameters of the designed mini-UAV model performance in the low speed wind tunnel (LSWT) power on testing system. On the basis of the identification scheme, it is able to reduce system operational cost of wind tunnel tests and provide a tool for predicting results without resorting to on-site experiments. A variety of variables in model types and testing environment such as model profile, angle of attack, elevator, tunnel wind speed and power system (motor and propeller) are considered. The method based on logic devices is simple yet effective. The results obtained are compared to those obtained by the conventional wind-tunnel testing method. To verify effectiveness of the proposed methodology, both of simulations and real-world experiments are conducted. The results show that the working performance of the proposed method correlates well with expectation.     

飞机后缘襟翼运动同步性设计和计算

在飞机的起飞、降落、巡航飞行中,襟翼运动起着重要的作用.全机有多块内、外襟翼,当分别绕各自不同的转轴运动时,会产生不同的圆锥运动.为实现所有的内、外襟翼同步运动,需对每块襟翼上的不同作动器进行精心设计、布局,及对作动器运动参数进行计算.这既非常关键,又相当复杂,一直是设计中的难题.介绍了现代客机襟翼作动器运动学计算方法...     

高校“双困”毕业生就业难点及就业对策探析

高校"双困"毕业生是就业的特殊群体,要实现"双困"毕业生的充分就业,国家应该从政策上加大扶持力度;高校要有针对性地进行专业技能拓展、心理健康教育和就业指导,提高学生的综合素质能力;"双困"生也应认清就业形势,转变观念,培养自身能力,提升就业竞争力。只有从多方面入手,才能最终达到充分就业的目的。     

一种用于高速数据采集系统的无损压缩方法

提出了一种应用于电子装备多通道数字信号高速采集与存储系统的无损压缩方法.该方法具有实现简单、压缩率高的特点.在高速数据采集系统的实际应用中,该方法能将海量采样数据压缩至原来的25%左右而不影响系统的处理速度,验证了该压缩方法的有效性和实用性.