八工位聚氨酯注塑回转自动生产线回转盘系统结构设计

本文介绍了八工位聚氨酯注塑回转自动生产线中回转盘系统的总体设计思路及各部件的结构设计，该系统具有运行平稳，定位准确和制造简单的特点。     

排球球缝随机气动力辨识建模

本文应用Ｈ（Ｈｏｕｓｅｈｏｌｄｅｒ）变换求解病态法方程之最小二乘法及三次样条函数最小二乘法，对不同球缝随机性气动力模型进行辨识，提高了参数估计精度。讨论了不同球缝和各种发政治协商会议方式气动力的建模方法，给出了数学模型，并进行了验证，所得结果与实践经验一致。表明气动力模型较符合实际，建模方法可行，模型简单实用，为研究运用球缝发飘球技术，提供了重要的模型依据。     

Time-frequency approaches to ISAR imaging of maneuvering targetsand their limitations

Inverse synthetic aperture radar (ISAR) imaging of the noncooperative maneuvering target is a challenging task because of its time variant orientation and rotation velocity which cannot be measured accurately. This correspondence investigates the principles of ISAR imaging of maneuvering targets, and proposes an algorithm for application in situations where the maneuverability is not too severe and the Doppler variation of subechoes from scatterers can be approximated as a first-order polynomial. The imaging results obtained by using real data show the effectiveness of the new method     

局域网建设在火箭发动机试车台CAD中的应用

介绍新型号发动机试车台在设计过程中,利用局域网进行大量的 CAD 工作,实现相关资源的共享,降低投资费用,避免重复性的工作,可节约大量的人力物力。主要介绍了 CAD 局域网的作用、网络的拓扑结构、网络设备和相关软件的选择。     

“天问一号”火星探测器UHF频段中继通信系统设计

“天问一号”火星探测器超高频（Ultra high frequency, UHF）频段中继通信系统作为中国首次火星探测任务实现的重要组成部分,负责为着陆巡视器与环绕器之间在火星进入、下降、着陆阶段（Entry, descent and landing, EDL）与火面巡视阶段提供高效可靠的通信服务。本文对中国火星探测器UHF频段中继通信方案进行了介绍,给出中继通信系统的组成、技术指标及链路设计方法,并对在轨飞行试验数据进行了分析。结果表明,全新研制的“天问一号”探测器UHF频段中继通信系统圆满完成了任务目标,其设计、实现和应用为后续中国深空中继通信系统研制提供了技术参考。     

Multi-sensor control for precise assembly of optical components

In order to perform an optical assembly accurately, a multi-sensor control strategy is developed which includes an attitude measurement system, a vision system, a loss measurement system and a force sensor. A 3-DOF attitude measuring method using linear variable differential transformers （LVDT） is designed to adjust the relation of position and attitude between the spher- ical mirror and the resonator. A micro vision feedback system is set up to extract the light beam and the diaphragm, which can achieve the coarse positioning of the spherical mirror in the optical assembly process. A rapid self-correlation method is presented to analyze the spectrum signal for the fine positioning. In order to prevent the damage of the optical components and realize sealing of the resonator, a hybrid force-position control is constructed to control the contact force of the optical components. The experimental results show that the proposed multi-sensor control strategy succeeds in accomplishing the precise assembly of the optical components, which consists of parallel adjustment, macro coarse adjustment, macro approach, micro fine adjustment, micro approach and optical contact. Therefore, the results validate the multi-sensor control strategy.     

直升机发动机历程数据管理信息系统的建立与应用齐 驰,滑朋杰,刘永新,孙世霞

直升机发动机历程记录仪用于科学、准确地计算航空发动机的工作时间和循环寿命消耗,为外场监控发动机的使用寿命提供科学依据。根据全系统全寿命维修管理的要求,为了更好地发挥发动机历程数据在航空维修管理中的作用,建立了某型直升机发动机历程数据管理信息系统,对于提高发动机全寿命管理具有较高应用价值。     

基于权衡空间探索的多约束弹道初值确定方法

运载火箭弹道设计对初值的选取敏感,需要设计人员具备相应经验,新构型或新任务下迭代设计易发散,设计过程依靠人员手动调整,效率较低。应用权衡空间探索及全局优化思想,给出了多约束弹道设计初值确定方法,并在此基础上重新建立了弹道设计流程,自动完成初值选取及精确设计,降低了设计过程对人员经验的依赖性,提升了弹道设计方法的智能化程度,提高了论证及设计效率。     

Prediction of forming limit curve （FLC） for AI-Li alloy 2198-T3 sheet using different yield functions

The Forming Limit Curve （FLC） of the third generation aluminum-lithium （Al-Li） alloy 2198-T3 is measured by conducting a hemispherical dome test with specimens of different widths. The theoretical prediction of the FLC of 2198-T3 is based on the M-K theory utilizing respectively the von Mises, Hill＇48, Hosford and Barlat 89 yield functions, and the different predicted curves due to different yield functions are compared with the experimentally measured FLC of 2198-T3. The results show that though there are differences among the four predicted curves, yet they all agree well with the experimentally measured curve. In the area near the planar strain state, the predicted curves and experimentally measured curve are very close. The predicted curve based on the Hosford yield function is more accurate under the tension-compression strain states described in the left part of the FLC, while the accuracy is better for the predicted curve based on Hill＇48 yield function under the tension-tension strain states shown in the right part.     

Prediction of forming limit curve (FLC) for Al-Li alloy 2198-T3 sheet using different yield functions

The Forming Limit Curve (FLC) of the third generation aluminum-lithium (Al-Li) alloy 2198-T3 is measured by conducting a hemispherical dome test with specimens of different widths. The theoretical pred...