电火花加工计算机辅助工艺过程设计系统

介绍电火花计算机辅助工艺过程设计系统（ＣＡＰＰＳ），用于为一个给定目标选择最佳操作。同时，还考虑了其它的会影响ＥＤＭ加工过程的加工方法（如铣削等）。系统的输入信息是在已有的ＣＡＤ信息的基础上产生的基于ＣＡＰＰ特征的工件描述。每个特征类对应于一个特定的一般工艺规程，并由系统对其进行评价，然后基于最低成本的原则，计算出最优工艺规程。同时还介绍了一种计算工时的通用方法。     

System of works on numerical modeling of the dynamics of the structure of the Space Radiotelescope in the RadioAstron project

The results of modeling the dynamics of the Space Radiotelescope are presented. The results of ground-based vibration-dynamic tests are used to validate the calculation models and estimate the damping levels. The dynamic distortions of the reflecting surface caused by the operation of the pointing mechanism of the high-gain antenna are estimated.     

The results of flight tests of an attitude control system for the Chibis-M microsatellite

The attitude control system of the Chibis-M microsatellite is described. Results of flight experiments on damping the initial angular velocity (made using magnetorquers) are considered, as well as stabilization in the orbital referece frame, and orientation of solar arrays toward the Sun using reaction wheels. The operation of algorithms of satellite attitude determination on sunlit and shadow segments of the orbit is also under study. The general logic of operation of the attitude control system in automatic mode is presented and discussed.     

A non-local vectorial total variational model for multichannel SAR image speckle suppression

This paper aims at the multichannel synthetic aperture radar(SAR)image speckle reduction.This paper proposes a novel energy minimized regularization model for multichannel image denoising,which is an extension of the non-local total variational model for gray-scale image.It contains two terms,namely the vectorial data fidelity term and the non-local vectorial total variation term.The latter is constructed by high-dimensional non-local gradient that contains the structure information of the multichannel image.The existence and the uniqueness of the solution of the model are proved.A fixed point iterative algorithm is designed to acquire the solution of this model.The convergence property of this algorithm is proved as well.This model is applied to the multipolarimetric and multi-temporal RADARSAT-2 images despeckling.The result shows that this model performs better than the original vectorial total variational model on texture preserving.     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

微波光子技术在电子对抗中的应用

由于光子技术的宽带和低损耗优势,微波光子技术已经在电子对抗领域中尤其是在微波信号的产生、处理、控制及传输等方面引起了强烈关注.着重阐述了微波信号的光子方法产生及处理、光子微波滤波器、光真延时波束形成以及光学A/D模数转换等技术,最后给出了结论.     

基于MATLAB/Simulink的HY-2星载微波散射计系统仿真建模

为实现星载微波散射计的优化设计,利用MATLAB软件搭建了海洋二号(HY-2)卫星微波散射计系统仿真模型。首先,参考其初样设计阶段的仿真模型,根据其最终设计方案和参数设置,对发射机、接收机、信号处理单元三个主要模块搭建仿真模型。其次,模拟海面风场监测过程,将仿真模型划分为信号源、发射机、海面回波、接收机、信号处理单元和结果输出六部分,并在初样设计模型的基础上引入信道特性,完善仿真模型。最后,利用雷达方程解算海面后向散射系数,验证了模型的正确性,可为我国后续微波散射计的设计和优化提供仿真分析手段。     

Quaternion regularization in celestial mechanics and astrodynamics and trajectory motion control. I

Regularization problems in celestial mechanics and astrodynamics are considered. The fundamental regular quaternion models of celestial mechanics and astrodynamics are presented. It is shown that the efficiency of analytical investigation and numerical solution of boundary problems of optimal trajectory motion control of spacecraft may be increased using quaternion astrodynamics models. The regularization problem of celestial mechanics and astrodynamics that implies eliminating the feature, which arises in the equations of the two-body problem in case of impact of the second body with the central body, is considered in the first section of the paper. The quaternion method for regularizing the equations of the perturbed spatial two-body problem suggested by the author is presented; the method is compared with Kustaanheimo-Stiefel (KS) regularization. Demonstrative geometric and kinematic interpretations of regularizing transformations are provided. Regular quaternion equations for the two-body problem, which generalize the regular Kustaanheimo-Stiefel equations, as well as regular equations in quaternion osculating elements and quaternion regular equations for perturbed central motion of a material point, are considered. The papers on quaternion regularization in celestial mechanics and astrodynamics are briefly analyzed.     

Space experiments aboard the Lomonosov MSU satellite

At present, the Institute of Nuclear Physics of Moscow State University, in cooperation with other organizations, is preparing space experiments onboard the Lomonosov satellite. The main goal of this mission is to study extreme astrophysical phenomena such as cosmic gamma-ray bursts and ultra-high-energy cosmic rays. These phenomena are associated with the processes occurring in the early universe in very distant astrophysical objects, therefore, they can provide information on the first stages of the evolution of the universe. This paper considers the main characteristics of the scientific equipment aboard the Lomonosov satellite.     

火箭返回制导动力着陆段的自适应启动方法

针对重复使用火箭垂直返回着陆问题,提出了一种燃料最优的动力着陆段自适应启动方法。首先,将燃料最优启动点对应的动力着陆轨迹的推力剖面和攻角剖面描述为解析的形式,该解析形式中攻角剖面由状态量唯一确定,推力剖面仅含一个待定参数。随后,通过预测具有上述解析剖面形式的轨迹判断是否启动动力着陆。计算中引入松弛终端位置约束的策略求解推力剖面待定参数,由终端位置约束判断是否满足燃料最优启动条件。上述策略将燃料最优启动条件的判断问题简化为单一变量求解问题,实现了该问题的快速求解。仿真结果表明,该方法得到的启动点与数值优化方法得到的燃料最优启动点接近,且求解过程稳定、计算效率高。