单一基准径向圆跳动误差的新测量法

用传统的测量方法不能得到单一基准径向圆跳动误差的准确值。根据单一基准径向圆跳动误差的定义建立了该项误差的正交最小二乘评定数学模型。在万能工具显微镜上得到了采样数据并给出了微机数据处理结果。     

冗余度机器人力控制的运动学稳定性分析

把非冗余度机器人位置／力混合控制方案引入到冗余度机器人，用线性化的动力学模型对其运动学稳定性进行分析，提出一种改进的基于运动学稳定的冗余度机器人混合控制策略。仿真研究结果证明了所提出方法的有效性。     

冲压空气涡轮性能的局部改进升力线算法

将现代螺旋桨的改进升力线算法应用于空气涡轮性能计算，结合冲压空气涡轮结构特性对叶片模化作了局部改进，对一个冲压空气涡轮模型作了计算，与实验结果和改进升力线法的对比表明，局部改进后的叶片环量和诱导速度分布合理，计算精度和宽度有明显改善，与实验符合较好。     

Intrinsic time scale for reconnection on the dayside magnetopause

Recently much attention has been focused on the transient behavior of the magnetopause in response to pressure pulses and southward fluctuations of the interplanetary magnetic field. We examine the motion of the magnetopause behind the foreshock and conclude that this motion is affected by foreshock pressure variations but not by fluctuations in the direction of the magnetic field. Neither magnetopause erosion nor flux transfer event occurrence is controlled by the foreshock. On the contrary, flux transfer events occur at times of steady IMF and thier quasi-periodic behavior is controlled by the magnetopause or the magnetosphere and is not driven by the external boundary conditions. Since flux transfer events are clearly due to reconnection, this observation implies that the IMF must be southward some time perhaps as long as 7 minutes before flux transfer begins.     

Dayside reconnection during IMF northward: A possible foreshock effect

The northward and southward orientation of the interplanetary magnetic field (IMF) is usually considered as providing the external boundary conditions in the solar wind interaction with the Earth's magnetopause but it is the magnetic field in the magnetosheath that interacts with the Earth's magnetic field. In this paper, we consider the possibility that the wave activity in the foreshock region may affect the magnetic field orientation in the magnetosheath with time scales that might be geomagnetically effective. If magnetosheath magnetic field becomes disturbed on plasma streamlines which are connected to the quasi-parallel bow shock and foreshock, the magnetic field orientation on the inner magnetosheath may differ significantly from the undisturbed IMF. We present a model of dayside reconnection which may occur when the IMF northward and illustrate its effects on the erosion of the magnetopause.     

冲击温度的理论计算及分析

当空间飞行器受到碎片的碰撞时,其壳体中会产生冲击加热。文章概述了计算冲击温度的三种基本方法;计算了铁的冲击加热温度,并与实验测量值作了比较。结果表明,利用三项式物态方程计算的冲击温度与测量值符合得比较好。另外,还对影响冲击温度计算值的若干因素进行了分析     

微重力下管肋式空间辐射器的整体优化分析

建立了向一重力环境下管肋式空间辐射器传热过程的数学模型，并以单质量散热量最大和热载体驱动功率最小为优化目标，对管式空间辐射器进行了优化分析。     

大直径铝合金铆钉以铆代螺可行性试验研究

针对双层铝合金板铆接结构,通过电磁铆接工艺试验,分析Φ10mm-2A10铝合金铆钉镦头的微观组织,与钢质螺栓连接接头对比评价了铆接接头的力学性能。研究发现,随放电电压的增加,铆钉镦头直径逐渐增加、高度逐渐降低。铆钉镦头以绝热剪切为主要变形模式。铆接接头的最大剪切和拉脱载荷分别为23.3k N和35.0k N,均高于钢质螺栓连接接头,并且相对于螺接接头可减重15.8%。     

航空发动机和燃气轮机热端部件热腐蚀-疲劳研究进展

航空发动机和燃气轮机在海洋环境下服役时,热端部件承受高温、高压、高转速机械载荷和高盐雾、高湿度等腐蚀环境耦合作用,常发生热腐蚀-疲劳失效,影响结构完整性、安全性和可靠性。本文针对航空发动机和燃气轮机热端部件热腐蚀-疲劳失效问题,总结和分析了涡轮盘、涡轮叶片高温合金及涂层热腐蚀机理,涡轮盘、涡轮叶片高温合金热腐蚀-疲劳失效机理以及热腐蚀-疲劳寿命预测模型和寿命评估方法,并对航空发动机和燃气轮机热端部件热腐蚀-疲劳试验研究和寿命评估方法的发展趋势进行了展望,以期促进燃气-海洋环境耦合作用下热端部件结构完整性评定方法的发展。     

一种悬挂物兼容飞机航电与武器总线的设计方法

在某悬挂物作为通用系统挂装不同型号飞机时,由于不同型号飞机对该悬挂物采用航电和武器两种不同的总线通信方式,导致该悬挂物不能兼容挂载多型飞机。本文针对现有的总线应用情况,提出了一种悬挂物可兼容飞机不同总线通信方式的设计方案,并给出了方案的具体实现方法。