基于多相正交序列移位序列的CDMA通信系统

介绍多相正交序列的构造方法,对多相正交序列的自相关和互相关特性进行分析。提出采用多相正交序 列的移位序列作为扩频序列的通信方式,并给出接收端序列同步的实现方法。这种方式能解决低相数多相正交序列互 相关特性不理想,而高相数多相正交序列难以搜索的困难。     

航管信息GPS时统系统

介绍航管信息 GPS时统系统的开发。描述系统方案设计、基于消息的异步存取技术、多线程技术和网络进程间通信技术 ,重点介绍了系统的开发技巧。     

低轨道带可变翼的平板型极高真空分子屏

本文计算了在低轨道自由飞行的平板型分子屏（ＷａｋｅＳｈｉｅｌｄＦａｃｉｌｉｔｙ）加了可变翼后，分子屏后实验区的压力分布。计算中考虑了分子屏和翼材料出气对实验区压力的影响。本文并对加可变翼和不加可变翼、考虑出气和不考虑出气几种情形进行了计算和比较。我们的结果表明：给轨道分子屏加上可变翼后，其实验区的压力可比不加可变翼降低一个数量级以上，压力达１０－１３Ｐａ。本文的研究表明，这种给轨道分子屏加可变翼的模型对更好的利用分子屏环境是非常有利的。     

喷管内型面烧蚀对发动机能量的影响

根据同一推进剂不同结构的两种型号发动机的试验结果，分析了喷管内型面烧蚀对发动机能量影响，提出了在两种烧蚀率相差较大的材料之间镶嵌一种烧蚀率适中的材料，可减少喷管内型面的烧蚀，提高喷管推力效率。     

精密加工中切削方向毛刺生成机理的研究(英文)

金属切削毛刺是切削加工中产生的常见现象之一。本研究以金属切削实验为基础 ,对二维精密切削中切削方向毛刺的形成过程、主要影响因素及其变化规律进行了系统的实验研究和相应的理论分析 ,结果表明 :( 1 )切削方向毛刺形成过程为正常切削、挠曲变形、弹性效应、继续切削和剪切断裂分离 ;( 2 )发现了切削方向毛刺形成过程中的切屑与工件表面剪切断裂分离的特殊现象 ;( 3)切削方向毛刺尺寸和形态随着切削条件和刀具几何参数的变化而变化。     

一种改进的翼型设计方法

本文将翼型的设计问题转化成多元函数求极值问题来求解,提出了一种改进的翼型设计方法,可用于考虑粘性影响时的亚临界翼型设计。     

无线电遥测监视小直径刀具的工况过程

小直径刀具(φ6mm以下小钻头、铣刀)加工中产生的磨、破损信号难于检测。本文基于这一问题,研究采用无线电遥测技术来传输传感器信号,并建立了CIMS,FMS加工中心钻、铣用小直径刀具的工况监视系统。研究表明:用遥测技术传输的切削过程信息是可以用来识别刀具切削状态的;小直径刀具折断快速报警的成功率在90％以上。     

How we will go to Mars

This article studies the efficiency of ejecting waste generated by the life support system (LSS) of a manned spacecraft to reduce initial mass on low earth orbit. The spacecraft is used for a long-duration interplanetary mission and is equipped with either a chemical or a nuclear-thermal propulsion system. For this study we simulate an optimal control problem for a given spacecraft maneuver. An impulsive approximation of the optimal interplanetary spacecraft trajectory is assumed, which allows us to reduce the general optimal control problem to hierarchic structure of 'outer' and 'inner' subproblems. This structure is analyzed using the Pontryagin's Maximum principle. Numerical results, illustrating the efficiency of waste ejection are shown for typical Earth-Mars transfer trajectories. This results confirm in theory that using a waste ejection system makes an early manned Mars mission possible without having to design and build new, advanced biological LSS.     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994–1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

复合材料壳体与喷管的卡环连接结构研究

较详细地对复合材料壳体与喷管卡环连接结构进行了有限元应力,应变分析,对卡环,接头及倒锥等多体接触问题进行研究;对“Ｉ”型及“Ｌ”型卡环结构分别进行了计算和比较,并给出计算结果及结果分析。