丁羟推进剂加速老化中动态弹性模量与力学性能的变化

高固体含量丁羟推进剂在加速老化实验中,用动态粘弹谱仪测得的弹性模量变化与单向拉伸力学性能的变化规律基本相同。根据对三个不同配方的研究表明,利用粘弹谱仪研究推进剂老化和筛选防老剂,方法简便,数据可靠。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

大型民用客机管制与监视系统验证与测试平台的构建

目的在于研发大型民用客机航路管制与监视系统验证与测试平台,以实现机地数据通信系统环境下的航路管制与监视信息的数据地面接收和处理;同时,依照现有的空管航路管制与监视功能的国际标准和相关区域的运行要求,实现地面管制系统向机载系统的数据发布。该项研究成果能对口飞机机载数据链相关的ATC(Air Traffic Control空中交通管制)功能和部分监视功能ADS-C(Automatic Dependent Surveillance-Contract合同式自动相关监视)、ADS-B(Automatic Dependent Surveillance-Broadcast广播式自动相关监视),提供对应的地面收发端,监控机载系统数据状态。该成果可以配合飞机研发过程中的试验和排故,并为适航验证工作提供有力的准备和支持。     

碳纤维用PAN原丝超声波水洗新技术

为降低PAN原丝中的DMSO(二甲基亚砜)残留量,减少其对原丝的拉伸、预氧化处理等过程的不利影响而造成的碳纤维的结构缺陷、强度降低,将超声波水洗技术应用到PAN原丝水洗工艺中.结果证明,新方法明显提高了水洗效果,能够快速有效地降低原丝中DMSO残留量.     

扫描隧道显微镜对粘胶基碳纤维表面微观结构的研究

用扫描隧道显微镜（STM）对粘胶基碳纤维（RCF）表面的微观结构进行了研究，首次获得了原子级的RCF图像，对其原子间距作了精确地量化，并且尝试着将所得到的图像与高定向降解石墨（HOPG）相比较，以期对RCF的微观结构有更深入的了解，在原子级尺度上，发现了原子排列并不规则的石墨状结构，二维视图量化结果表明：相邻原子间距为0．142nm，最近六圆环中心的距离是0．253nm。     

一种新的星载GPS定轨滤波算法

针对传统EKF(Extended Kalman Filtering)算法应用于星载GPS(Global Positioning System)低轨卫星定轨时系统噪声方差初值不易确定的问题,提出了一种新的定轨滤波算法.该算法在非线性方程线性化过程中,在前一时刻滤波估值点进行线性化,从而得到扰动方程,并将该扰动方程引入到传统EKF进行滤波处理.该算法与传统EKF分别应用在星载GPS低轨卫星的定轨中,通过比较,结果表明改进的算法在一定程度上抑制了由于系统噪声方差阵选取偏差较大而引起的滤波发散现象,且对于系统噪声方差的初值选取有较强的鲁棒性.      

夹层玻璃力学模型的探讨

根据夹层玻璃的实验应力分析结果和板壳弹性理论,提出复合刚度矩阵处理均质连续夹层玻璃和分解外力计算单片玻璃两种力学模型和计算方法,分别针对夹层材料的不同弹性常数下的受力状态,采用有限元数值计算得出有一定精度并非常实用的夹层玻璃应力分布。     

一种基于语义的Ontology映射方法

O n to logy映射是实现异构O n to logy互操作的有效方法,目前的O n to logy映射主要采用句法方法,而很少采用语义方法。本文提出了一种基于语义的O n to logy映射方法,该方法考虑了O n to logy中的概念属性,采用概念名称相似性、概念属性集合相似性、相关概念集合相似性等确定O n to logy之间的语义映射关系;采用语义半径提高了语义映射方法的灵活性。试验分析表明:该方法得到的映射的准确率和查全率在90%以上,准确率和查全率均优于S-M atch方法。该方法已在基于知识需求的主动式知识系统原型中实现,并在某研究所得到了应用。     

Relay selection based on MAP estimation for cooperative communication with outdated channel state information

In this paper, we consider an amplify-and-forward (AF) cooperative communication system when the channel state information (CSI) used in relay selection differs from that during data transmission, i.e., the CSI used in relay selection is outdated. The selected relay may not be actually the best for data transmission and the outage performance of the cooperative system will deteriorate. To improve its performance, we propose a relay selection strategy based on maximum a posteriori (MAP) estimation, where relay is selected based on predicted signal-to-noise ratio (SNR). To reduce the computation complexity, we approximate the a posteriori probability density of SNR and obtain a closed-form predicted SNR, and a relay selection strategy based on the approximate MAP estimation (RS-AMAP) is proposed. The simulation results show that this approximation leads to trivial performance loss from the perspective of outage probability. Compared with relay selection strategies given in the literature, the outage probability is reduced largely through RS-AMAP for medium-to-large transmitting powers and medium-to-high channel correlation coefficients.     

调温热沉设备的状态空间法仿真设计

调温热沉设备日益成为部组件热真空试验的首选,它具有经济性好、使用方便、对试件无遮挡等优点。文章通过状态空间描述的分布参数模型,对调温热沉设备进行仿真设计,得出氮气、热沉、试件三者温度的动态关系,对于进口氮气温度、流量的选择和控制方案的制定都进行了深入的分析。所获取的数据可为采用热沉调温方式的热真空试验提供参考。