构架式可展天线机构自由度分析——拆杆等效法

针对四面体构架式可展天线机构的多环耦合特性,提出了一种空间多环耦合机构的自由度分析方法——拆杆等效法。首先拆除四面体基本可展单元机构的耦合约束链,将剩余部分视为一个并联机构,然后应用螺旋理论分析各输出节点的自由度数目及性质,进而构造各输出节点与定节点之间的等效串联运动链,最后复原拆除的耦合约束链得到四面体基本可展单元的等效机构,应用修正的G-K公式计算等效机构的自由度数目,并基于反螺旋理论分析等效机构的自由度性质,从而获得四面体基本可展单元的运动特性。根据四面体基本可展单元的等效机构及其组合方式对最小组合单元及大尺寸构架式可展天线机构的结构进行了化简,并根据其几何特征约束方程推导了最小组合单元及大尺寸构架式可展天线机构的自由度。建立了由27个四面体基本可展单元组成的构架式可展天线机构的仿真模型,对该机构的自由度进行了验证,结果表明提出的拆杆等效法求得的自由度正确,为进一步分析此类天线机构的运动学和动力学奠定了基础,同时为其他类型的空间多环耦合机构的自由度分析提供了一种新的思路。     

基于空间矢量脉宽调制的过调制策略研究

在电机控制中,过调制算法能够显著提高逆变器输出的电压,对提高电机转速有着重要意义。为了改善空间矢量脉宽调制对直流母线电压利用率不足的缺点,研究了基于空间矢量脉宽调制的单模式过调制算法,对输出电压基波幅值与其谐波含量进行理论分析。针对过调制区实际输出电压基波幅值与参考电压不一致这一问题,对目标调制比与给定调制比的关系作出可控性分析,作出拟合曲线并求出函数关系,最后对该过调制算法进行了仿真研究和试验验证。仿真分析和试验验证结果均证明了理论分析的正确性和可行性。     

A formal approach using SysML for capturing functional requirements in avionics domain

In this work, a Model-Based Systems Engineering approach based on SysML is proposed. This approach is used for the capture and the definition of functional requirements in avionics domain. The motivation of this work is triple: guide the capture of functional requirements, validate these functional requirements through functional simulation, and verify efficiently the consistency of these functional requirements. The proposed approach is decomposed into several steps that are detailed to go from conceptual model of avionics domain to a formal functional model that can be simulated in its operating context. To achieve this work, a subset of SysML has been used as an intermediate modelling language to ensure progressive transformation that can be understood and agreed by system stakeholders. Formal concepts are introduced to ensure theoretical consistency of the approach. In addition, transformation rules are defined and the mappings between concepts of ARP4754A civil aircraft guidelines and SysML are formalized through meta-model. The resulting formalization enables engineers to perform functional simulation of the top-level functional architecture extracted from operational scenarios. Finally, the approach has been tested on an industrial avionics system called the Onboard Maintenance System.     

Distributed intelligent self-organized mission planning of multi-UAV for dynamic targets cooperative search-attack

This article studies the cooperative search-attack mission problem with dynamic targets and threats, and presents a Distributed Intelligent Self-Organized Mission Planning (DISOMP) algorithm for multiple Unmanned Aerial Vehicles (multi-UAV). The DISOMP algorithm can be divided into four modules: a search module designed based on the distributed Ant Colony Optimization (ACO) algorithm, an attack module designed based on the Parallel Approach (PA) scheme, a threat avoidance module designed based on the Dubins Curve (DC) and a communication module designed for information exchange among the multi-UAV system and the dynamic environment. A series of simulations of multi-UAV searching and attacking the moving targets are carried out, in which the search-attack mission completeness, execution efficiency and system suitability of the DISOMP algorithm are analyzed. The simulation results exhibit that the DISOMP algorithm based on online distributed down-top strategy is characterized by good flexibility, scalability and adaptability, in the dynamic targets searching and attacking problem.     

静强度杆板模型和单梁模型动响应载荷比较

文中通过将某型飞机机身等直段的静强度杆板模型,进行修改来得到动力学杆板模型,与此同时,建立了相应的单梁动力学模型,为了保证2种模型的动力学相似,根据动力学杆板模型的模态频率和振型,对单梁动力学模型进行了修正。对2个模型加载了同样的载荷时间历程,并对2个模型的截面积分载荷进行了比较,并将中间截面积分载荷极值时刻的杆板动力学模型的应力分布和静强度模型加载相同载荷后的应力分布,进行了比较。比较的结果表明,在主要模态频率和振型一致的条件下,单梁动力学模型在截面载荷响应和严重情况应力分布方面与静强度杆板动力学模型也有较好的一致性。此结果在一定程度上,为采用单梁动力学模型计算动响应载荷的合理性提供了佐证。     

低速大转矩永磁游标电机在发酵罐中的应用

采用秸秆生产丁醇时,为了达到高效率发酵,需要使发酵液中菌体分布均匀,所加物料需要及时搅拌。工业化生产丁醇的发酵罐尺寸较大,搅拌过程对驱动电机的输出转矩要求较高,因此高效率、小体积、低速大转矩的秸秆发酵搅拌电机对工业化发酵生产丁醇意义重大。设计了一种定转子永磁游标电机用于发酵液搅拌,并对电机的槽极数、电磁性能进行了具体的研究。制造样机并采用滞环控制实现了对液态发酵对象的快速响应,且实现了低能耗、高效率的发酵过程。     

Electrochemical trepanning with uniform electrolyte flow around the entire blade profile

In the traditional machining process for diffusers, blades are easily deformed, and methods suffer from high tool wear and low efficiency. Electrochemical machining(ECM) possesses unique advantages when applied to these difficult-to-machine materials. In the ECM process, theflow field plays a crucial role. Here, an electrolyte flow mode that supplies uniform flow around the entire blade profile was adopted for electrochemical trepanning of diffusers. Various flow rates were employed to obtain the optimal flow field. Simulations were conducted using ANSYS software, and results indicated that increasing the flow rate substantially afforded a more uniform flowfield. A series of experiments was then performed, and results revealed that increasing the flow rate greatly improved both the machining efficiency and the surface quality of the diffusers. The maximum feeding rate of the cathode reached 4 mm/min, the blade taper of the concave part decreased to 0.02, and the blade roughness was reduced to 1.216 lm. The results of this study demonstrated the high feasibility of this method and its potential for machining other complex components for engineering applications.     

太阳能飞行器能源昼夜闭环仿真分析

以能量为核心,建立太阳能飞行器的获能模型;通过对太阳能飞行器飞行剖面特点的分析,设计飞行过程中各个阶段的飞行方案,并建立相应的耗能模型;考虑目前储能电池技术水平,根据产能和耗能模型,建立储能模型,完成了能源闭环模型的设计;参照Zephyr 7太阳能无人机的结构参数对论文建立的模型进行了仿真分析,获取了飞行过程中能量变化规律,同时对飞行姿态进行优化。结果表明：通过对太阳能飞行器昼夜飞行高度的不同设置以及飞行姿态角的优化,太阳能飞行器可以实现跨昼夜持久飞行。     

双拦截弹拦截单目标边界型微分对策制导律研究

针对战术弹道导弹、高超声速巡航导弹和无人飞行器等新型具有高机动性能的防空目标,为提高成功拦截的概率,采用多枚拦截弹进行拦截。应用微分对策理论,将双拦截弹拦截单目标的末段制导问题建模为“二对一追踪-逃逸”对策模型。考虑最大加速度约束,研究了两枚拦截弹的拦截空间分解和对策空间分布,并通过仿真研究了制导律性能。结果表明：采用两枚拦截弹拦截时,脱靶量对目标机动方向的转变时间具有很好的鲁棒性。     

电动式磁悬浮动量球电磁场耦合分析

本文针对电动式磁悬浮动量球(Electrodynamic suspension reaction sphere, EDSRS)的电磁场耦合进行分析,采用定子绕组的感应电动势评判耦合强度,提出了耦合强度评判指标,作为EDSRS的结构设计约束,以降低电磁场耦合的影响。首先,结合EDSRS的具体结构特点,对多定子之间的电磁场耦合问题进行分析,采用定子电磁场在另一个定子绕组中产生的感应电动势评判耦合强度。然后,对感应电动势产生规律进行分析,提出了耦合强度评判指标,并基于所提评判指标,建立了耦合约束验证流程,作为EDSRS的结构设计约束,最后,通过有限元仿真和实验验证了上述电磁场耦合分析。