不同喷铝参数对复合材料雷击防护性能模拟

为了研究复合材料不同的雷击防护(lightning strike protection,LSP)系统在雷电流作用下的损伤规律,对雷击损伤过程和烧蚀机理进行分析,建立复合材料层合板雷击防护的能量平衡数学模型。在此基础上,在ABAQUS中建立复合材料基准件、全喷铝和局部喷铝防护系统的碳纤维增强复合材料(carbon fiber reinforced polymer,CFRP)层合板电-热耦合有限元模型,和实验结果对比验证模型的有效性,对雷击烧蚀损伤特征进行分析,并引入雷击烧蚀损伤指数DI,得出三种不同模型在不同铝涂层厚度、不同峰值雷电流作用下的烧蚀损伤规律,并对两种不同的局部喷铝防护系统下复合材料的损伤特征进行对比分析。结果表明:雷击防护系统下复合材料的烧蚀损伤面积和铝涂层厚度关系进行函数拟合,两者均满足幂函数关系。     

舰载倾转旋翼机着舰域耦合流场数值模拟研究

倾转旋翼机是当前旋翼飞行器研究的热点,但有关舰载倾转旋翼机着舰域耦合流场的研究还很少。以两栖攻击舰(LHA)和V-22"鱼鹰"倾转旋翼机为研究对象,基于雷诺平均Navier-Stokes(RANS)方程和SST k-ω湍流模型对舰载倾转旋翼机着舰域耦合流场进行数值模拟研究,并探讨了不同着舰高度时机/舰耦合流场的相互作用。结果表明:倾转旋翼尾流会与舰船脱落涡、甲板舷涡以及舰岛艉涡发生较强的"涡-涡干扰"现象,加大了耦合流场的湍流强度;舰船流场的低频非稳态特征会导致旋翼桨盘气动载荷发生显著的波动,不利于飞行操纵;垂直降落过程中,舰船甲板会形成"前低后高"的压力分布特征,倾转旋翼RMS气动载荷值也会明显增加,降低了着舰安全性,且右旋翼RMS气动载荷值比左旋翼平均大一倍以上,这也表明右旋翼面临着更加严峻的气动环境。     

Application of novel force control strategies to enhance robotic abrasive belt grinding quality of aero-engine blades

Robotic belt grinding has emerged as a finishing process in recent years for machining components with high surface finish and flexibility.The surface machining consistency, however,is difficult to be guaranteed in such a process.To overcome this problem, a method of hybrid force-position control combined with PI/PD control is proposed to be applied in robotic abrasive belt grinding of complex geometries.Voltage signals are firstly obtained and transformed to force information with signal conditioning methods.Secondly, zero drift and gravity compensation algorithms are presented to calibrate the F/T transducer which is installed on the robot end-effector.Next, a force control strategy combining hybrid force-position control with PI/PD control is introduced to be employed in robotic abrasive belt grinding operations where the force control law is applied to the Z direction of the tool frame and the positon control law is used in the X direction of the tool frame.Then, the accuracy of the F/T transducer and the robotic force control system is analyzed to ensure the stability and reliability of force control in the robotic grinding process.Finally, two typical cases on robotic belt grinding of a test workpiece and an aero-engine blade are conducted to validate the practicality and effectiveness of the force control technology proposed.     

扭矩扳子检定装置量值传递相关问题探讨

通过对扭矩量值传递中有关器具工作原理及工作时受力的分析,指出了用扭矩扳子检定装置检定扭矩扳子时检定结果难以一致的原因,给出了解决办法,并进行了验证。     

支持多核的嵌入式操作系统关键技术研究

以分析当前支持多核的操作系统需实现的关键技术为基础,从多核操作系统的引导和初始化、多核操作系统任务管理、多核中断、核间通信以及核间同步与互斥等方面具体分析、研究支持多核的嵌入式操作系统的实现机制,提出了一种多核领域操作系统关键技术的解决思路.     

除冰液对道面混凝土的影响及保护剂防护效果

通过冻融和化学侵蚀试验，研究了NW-056A机场道面除冰液对道面水混混凝土耐久性的影响以及在道面除冰液环境下两种新型混凝土保护剂的防护效果。结果表明：①混凝土在道面除冰液中冻融后表面无明显剥落现象，相对动弹模损失率比在水中小很多，道面除冰液延缓了混凝土的冻融破坏：②混凝土在道面除冰液常温浸泡下表面无剥蚀现象，但强度比在水中降低很多，因此存在化学腐蚀．且主要表现为对混凝土内部结构的缓慢损伤；（④两种新型混凝土保护剂均对预防混凝土的冻融破坏以及除冰液环境下的腐蚀破坏起到一定作用，涂刷混凝土保护剂是提高混凝土道面耐久性的有效方法。     

空间可展桁架结构等效动力学模型研究进展与展望

随着航天重大工程的逐步实施，桁架式空间可展结构正朝着大型化、轻量化和多功能等方向发展，该类桁架结构具有周期性、大柔度、构型复杂等特点。为满足大型空间结构的高精度、高可靠性要求，其动力学建模、非线性振动与振动控制等问题越来越复杂且难于处理。因此，大型空间可展结构的等效连续体建模成为研究热点。本文着重介绍大型空间可展桁架结构等效动力学建模的研究现状，综述了等效动力学建模的研究对象、方法及已取得的成果，提炼出等效动力学建模和与之相应的非线性振动与振动控制研究领域中亟待深入研究的关键科学问题。     

Crystal orientation and morphology of α lamellae in wrought titanium alloys: On the role of microstructure evolution in β processing

To obtain high-quality aviation forgings of titanium alloys, β forging is an essential processing step which must be considered throughout a production process. In this work, the effect of β forging on the crystal orientation and morphology of lamellar α was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during β working resulted in the formation of low-angle grain boundary (LAGB_β) inside β grains. The lamellar α can penetrate through the LAGB_β, leading to similar intra α LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed. A continuous change of the β orientation in diffusive boundaries results in the formation of fine and disordered α lamellae without intra-lamellar boundary to hold the Burgers orientation relationship (OR). On sharp boundaries, it is prone to producing continuous grain boundary α (α_GB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary α for a smoother orientation change on the β grain boundary.     

偶发组播数据丢包问题研究

针对传输关键控制数据的某型冗余备份网络架构在大背景流量下偶发组播数据丢包的问题,分析了丢包机理,提出配置静态组播组的方法,同时进行了实验验证。结果表明,该方法能有效解决工程实践中出现的问题。因此,在网络结构设计时,要充分考虑传输链路中会对组播传输产生洪泛的设备,采取有效措施消除影响,确保组播数据传输的正确性与完整性。