交会对接最终逼近段制导控制律设计方法研究

针对空间交会对接最终逼近阶段要求较高的控制精度以及连续控制力（转矩）难于实现等问题，文中在制导律设计方面使用了一种基于Hill方程的直线型制导及其常值推力等效实现的策略，在姿态控制方面使用补偿线性化以及PWPF调节器实现的控制方法，对于以上两种制导控制律，利用半物理仿真平台对算法的有效性和可行性给予了验证。     

基于DS18B20的智能温度控制器

基于DS18B20的智能温度控制器采用单总线数字温度传感器,硬件结构简单,测量精度高,抗干扰能力强,重点介绍DS18B20的特性和编程要点。     

结合环的导子与交换性

利用导子对结合环交换性进行了研究,推广了已有结论。     

固体火箭发动机试验故障分析

从工程研制角度出发，探讨了分析固体火箭发动机试验失败原因的一般方法和过程，根据某发动机试验故障的具体情况，运用这种试验故障分析方法和过程（即针对试验故障进行故障树分析，设计复审分析，数据曲线的复核复算分析和验证试验），找出造成发动机试验故障的具体原因，确定故障机理；而后针对性地采取综合技术措施，并对这些措施进行试验验证，故障归零。     

基于Infineon CAN器件的总线通信速率侦测方法

本文论述了采用Infineon(sIEMENS)CAN器件侦测CAN总线通信Baudrate的两种方法。在未知现场运行CAN系统参数的情况下，采用所述方法可使未初始化的新的CAN节点接人CAN系统，而不影响现有CAN系统的运行。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

带充液腔的自旋卫星稳定性问题

本文应用Pfeiffer的思想讨论带轴对称充液腔的卫星系统自旋稳定性。本方法的基本思想为将轴对称腔内的液体旋度平均化,使之与空间位置无关,由此将液体的无限自由度问题离散化为有限自由度问题,从而用线性理论讨论系统的自旋稳定性。用这方法,本文讨论了带充液腔的非轴对称卫星系统、带充液腔的双自旋卫星系统的自旋稳定性,给出了它们的自旋稳定性判据。此外,本文还给出了一些带有不同形状腔体的卫星系统自旋稳定域图,为实际工程设计人员提供理论参考。     

基于AT89C52的离散信号测量电路设计

介绍了离散信号测量与控制在反舰导弹雷达导引头自动测控系统中的重要性 ,给出了基于AT89C5 2单片机控制的离散信号测量电路的具体构成和工作原理