基于脑电功率谱密度的作业人员脑力负荷评估方法

脑力负荷状态的准确识别对减少因作业人员无效脑力负荷导致的人因事故具有重要意义。针对人-机系统中作业人员脑力负荷客观评估问题开展了基于MATB-Ⅱ平台的3种不同脑力负荷水平下的航空情境实验，记录16名被试的NASA任务负荷指数（NASA-TLX）量表数据和脑电（EEG）信号，提出了一种基于脑电功率谱密度（PSD）和支持向量机（SVM）的个体脑力负荷评估方法。结果表明：随着实验设计脑力负荷水平增加，被试的主观脑力负荷得分显著提高（p<0.001），这表明该实验任务设计较好地诱发了低负荷、中负荷和高负荷情境。在此基础上，通过网格搜索法确定个体脑力负荷评估模型的统一优化参数，惩罚系数取3 000，核函数参数取0.000 1，模型测试正确率达到0.966 5±0.029 8，宏平均的受试者工作特征曲线下的面积（Macro-AUC）达到0.991 0±0.011 4。本文为作业人员脑力负荷状态的客观和准确评估提供了一种新的办法，为后期作业人员脑力负荷状态的实时判别提供模型基础。     

旅游者出游激励理论探讨

从期望理论的视角审视旅游者的决策过程,主要借鉴维克托.弗鲁姆(Victor H. Vroom)期望理论的相关原理,初步搭建了旅游者出游激励理论的基本框架,解决了旅游者决策依据问题。通过旅游感知效价、旅游感知成本等全新概念的引入和一系列调查问卷的设计,最终得出了出游激励力的完整表达式并有以下阶段性结论:(1)信息准备是旅游感知效价、旅游期望值2、旅游感知成本的直接来源;(2)旅游感知效价、旅游期望值2、旅游感知成本对旅游者做出决策至关重要;(3)出游激励力是旅游者最终做出决策的惟一依据。     

Exploiting global information in complex network repair processes

Robustness of complex networks has been studied for decades,with a particular focus on network attack.Research on network repair,on the other hand,has been conducted only very lately,given the even higher complexity and absence of an effective evaluation metric.A recently proposed network repair strategy is self-healing,which aims to repair networks for larger compo nents at a low cost only with local information.In this paper,we discuss the effectiveness and effi ciency of self-healing,which limits network repair to be a multi-objective optimization problem and makes it difficult to measure its optimality.This leads us to a new network repair evaluation metric.Since the time complexity of the computation is very high,we devise a greedy ranking strategy.Evaluations on both real-world and random networks show the effectiveness of our new metric and repair strategy.Our study contributes to optimal network repair algorithms and provides a gold standard for future studies on network repair.     

磁选态单束铯束管束光学参数的模拟计算和设计

为提高铯束管跃迁信号强度,在束光学参数设计中,用蒙特卡罗方法模拟计算铯原子通过率和未跃迁比例。通过改变模拟计算中的束光学参数,分析铯原子通过率、未跃迁比例和倍增器首极电流的变化趋势,得到了主要束光学参数的合理取值范围。在铯束管实际装配和试验中使用束光学参数设计结果,有效地增加了倍增器首极电流。     

A general calculation method to specify center-of-buoyancy for the stratospheric airship with multiple gas cells

As the lighter-than-air (LTA) flight vehicle, the stratospheric airship is a desirable platform to provide communication and surveillance services. During the ascent from sea-level to the mission altitude, the volume of the lifting gas may change significantly, which will result in the change of the center-of-buoyancy (CB). A general calculation method is developed to specify CB for the stratospheric airship with a double-ellipsoid hull and an arbitrary number of the gas cells. The cross-section-integral (CSI) method is used as a basic calculation scenario to specify CB. Considering the complexity in determining the boundary between the helium and air in the gas cell, a searching algorithm is put forward and the specification of CB can be conducted by the iterative calculation. As an important application, the stable condition of the pitch angle is analyzed when the change of CB is involved. Under different initial configurations, the stable pitch angle of the stratospheric airship during the ascent is specified and compared, which shows the advantages of the multi-gas-cell configuration. The results of this paper may provide an important reference for the engineering application of the stratospheric airship.     

空间激光通信系统中的信道纠错编码技术

由于空间激光通信系统的信道状态和链路捕获跟踪的不确定性,多种形式的信道纠错编码技术正被广泛发展研究。结合空间激光通信链路中误码性能的主要影响因素,分别选择合适的编码方案进行分析。通过仿真实验可知,对于在大气结构参数为1.5×10~(-14) m~(-2/3)、风速为20 m/s的空地激光链路的环境下,在系统数据速率为2 Gbit/s、要求误码率为10~(-6)时,LDPC码结合交织码相对未编码系统有3 dB的等效编码增益,LT码相对未编码系统有3.8 dB的等效编码增益。提供了一种能快速生成、扩展和校验的编码和交织实现方法,以抵抗大气湍流的快速变化对系统性能产生的影响。     

静止轨道卫星通信链路的预算与分析

星地链路计算作为卫星通信的重要技术，是卫星通信系统设计的基础和理论依据，直接决定了卫星通信系统的链路通信质量。由于影响卫星链路的因素很多，设计中存在一处不合理即使得整条星地链路不可用，造成巨大的损失。而且在实际设计中无法做到最理想的链路状态，往往需要在某方面有所取舍，这也是链路计算中的一大难点。基于目前国际通用的链路计算方法，将星地链路上下行拆分，独立计算，综合分析，再结合实际工程经验，分析和计算实际工程案例，针对不同的链路配置给出相应合理的设计方法，可作为静止轨道通信卫星星地链路计算分析的参考。     

精密露点仪标准装置的性能测试及计量软件设计

文章介绍了以373型精密露点仪为主标准器的湿度标准装置的原理及构成,对该装置的重复性和稳定性进行了测试。结果表明温度重复性实验的标准偏差为0.00℃,相对湿度重复性实验的标准偏差为0.07%RH,露点温度重复性实验的标准偏差为0.01℃。温度稳定性实验的标准偏差为0.02℃,相对湿度稳定性实验的标准偏差为0.33%RH,露点温度稳定性实验的标准偏差为0.066℃。基于美国NI公司的Labview软件开发平台,开发了湿度仪器仪表计量软件。软件以模块化思想为基础,可实现数据自动处理,报告自动生成。     

Abnormal changes of dynamic derivatives at low reduced frequencies

A number of studies have found that abnormal changes of dynamic derivatives occurred at very low reduced frequencies, but its inducement mechanism is not very clear. This paper has researched the abnormal changes and analyzed the influence on some parameters by solving the unsteady flow around forced oscillation airfoils based on Navier-Stokes equations. Results indicate that when the reduced frequency approaches to zero, the dynamic derivatives obtained by the numerical method will diverge. We have also proven it in theory that this phenomenon is not physical but completely caused by numerical singularity. Furthermore, the abnormal phenomenon can be effectively mitigated by using the time spectral method to solve the aerodynamic forces and the integral method to obtain the dynamic derivatives. When the reduced frequency is in the range of 0.001–0.01, the dynamic derivative maintains nearly unchanged for the whole speed region. This study can provide a reference for the reasonable choice of the reduced frequency in calculations and experiments of dynamic derivatives.     

纤维增韧陶瓷基复合材料的比例极限应力与残余热应力关系

从细观力学角度分析并建立了纤维增韧陶瓷基复合材料从制备温度冷却到室温过程中产生的残余热应力与复合材料的比例极限应力的关系模型。该模型表明,减少复合材料的残余热应力或提高复合材料的纤维与基体的模量比,均可提高复合材料的比例极限应力。通过单调拉伸实验测试了先驱体浸渍裂解法(PIP)制备的2D SiC/SiC复合材料的比例极限应力,并采用文中建立的比例极限应力与残余热应力关系模型,计算出复合材料SiC基体的残余热应力为-19.5 MPa。分析表明,该结果是合理的。此外,引用了公开文献报道的5种复合材料体系数据,用于验证文中所建立的比例极限应力与残余热应力关系模型的适应性和可靠性,计算结果与实验结果最大误差为18.6%,表明该模型具有较好的适应性和可靠性,可为纤维增韧陶瓷基复合材料的研究提供新思路。