分布式卫星干涉测高系统编队构形优化设计方法

 分布式卫星干涉合成孔径雷达（InSAR）编队构形设计是系统总体设计的关键问题。从系统测高性能优化角度出发,提出分布式InSAR编队优化设计一般方法,将其概括为求解一个优化问题,以主星带辅星群体制分布式InSAR为例建立目标函数,针对其星载双站、斜视、空间基线等特点建立测高精度与辅星轨道根数的关系,基于近似的相对运动数学模型对该优化问题进行简化,并采用遗传算法求解。在此基础上,对多颗卫星组成编队以提高系统测高性能提出了一种多星编队设计方法。仿真分析表明,经优化得到的编队测高性能要优于干涉车轮和钟摆编队,该结果验证了优化设计方法的有效性和正确性。     

基于动态逆和神经网络的机动弹头姿态控制系统设计

机动弹头是复杂的非线性系统,它给姿态控制系统设计人员以极大的挑战。为了满足飞行稳定性要求,提高系统的适应性和鲁棒性,本文构造了动态逆神经网络姿态控制系统,设计了慢变量和快变量动态逆,引入了在线神经网络进行逆误差的补偿。实例仿真的结果表明:动态逆和在线神经网络的结合,能够实现弹头的稳定飞行。     

一种恒电长度干涉仪分析的新方法

对数周期天线的相位中心随频率呈线性变化,用2个对数周期天线可以构成具有恒电特性的干涉仪天线阵,在工程应用中,天线相位中心较大的测试误差会导致天线阵调试困难.通过对恒电长度干涉仪的分析,提出了利用相位扫频测试对天线阵进行调试分析的方法,避免了繁杂的相位中心测试,简化了天线阵的调试过程,测试数据可直接用于系统校正.     

Space–Time Structure of Energetic Electron Precipitations according to the Data of Balloon Observations and Polar Satellite Measurements on February 1–6, 2015

Cosmic Research - The results of an analysis of the space–time characteristics and dynamics of precipitations of magnetospheric electrons with energies in the range from 0.1 to 0.7 MeV are...     

Erratum to: Determination of the Probability of Collision of Near-Earth Space Objects Taking into Account Form and Orientation

Cosmic Research - An Erratum to this paper has been published: https://doi.org/10.1134/S0010952521120030     

China's Space Activities In 2007

THE FOURTH BEIDOU NAVIGATION EXPERIMENTAL SATELLITE LAUNCHED The fourth Beidou experimental navigation satellite was launched into snace aton a LM-3A launch vehicle at Xichang Satellite Launch Center on February 3 at 00:28(Beijing Time).24 minutes later,the satellite separated from the launch vehicle and     

Debut Flight Of LM-3C:Launching Tianlian-1 Successfully

FY-3A,the first satellite of China's new generation of polar-orbiting meteorological satellites,was launched into space atop a modified LM-4C launch vehicle.The satellite separated from the rocket 19 minutes after the takeoff.Flying at an altitude of 807km with an inclination of 98.8 degrees,the satellite circles in polar orbit 14 times everyday,covering the whole globe twice a day. FY-3A has a design lifetime of three years.Weighing 2295kg,the three-axis stabilized satellite is equipped with 11 remote s...     

The mass loss of spacecraft polyimide films under the action of atomic oxygen and vacuum ultraviolet radiation

The threshold values of the annual fluence of atomic oxygen (F _AO ≈ 10²⁰ cm^?2), as well as the ratios of the energy-flux density of vacuum ultraviolet radiation of the solar spectrum to the flux density of atomic oxygen (Φ _ν /Φ _AO ≈ 8 × 10^?15 mJ) were determined, which are characterized the influence of the synergistic effect on the mass loss of Kapton-H, PM-A, and PM-1E polyimide films, which are spacecraft materials.     

Shock protection of penetrator-based instrumentation via a sublimation approach

It is often necessary for space-borne instrumentation to cope with substantial levels of shock acceleration both in the initial launch phase, as well as during entry, descent and landing in the case of planetary exploration. Current plans for a new generation of penetrator-based space missions will subject the associated on-board instrumentation to far greater levels of shock, and ways must therefore be found to either ruggedize or else protect any sensitive components during the impact phase. In this paper, we present an innovative method of shock protection that is suited for use in a number of planetary environments, based upon the temporary encapsulation of said components within a waxy solid which may then be sublimated to return the instrument back to its normal operation. We have tested this method experimentally using micromachined silicon suspensions under applied shock loads of up to 15,000g, and found that these were able to survive without incurring damage. Furthermore, quality factor measurements undertaken on these suspensions indicate that their mechanical performance remains unaffected by the encapsulation and subsequent sublimation process.