XZG—2型综合告警器的研制

ＸＺＧ－２型综合告警器是配装在ＪＬ８飞机上的机载成件。本文介绍了该告警器的结构特点、工作原理及研制情况。     

Non-conventional approaches to food processing in CELSS. I--Algal proteins; characterization and process optimization.

Protein isolate obtained from green algae (Scenedesmus obliquus) cultivated under controlled conditions was characterized. Molecular weight determination of fractionated algal proteins using SDS-polyacrylamide gel electrophoresis revealed a wide spectrum of molecular weights ranging from 15,000 to 220,000. Isoelectric points of dissociated proteins were in the range of 3.95 to 6.20. Amino acid composition of protein isolate compared favorably with FAO standards. High content of essential amino acids leucine, valine, phenylalanine and lysine makes algal protein isolate a high quality component of CELSS diets. To optimize the removal of algal lipids and pigments supercritical carbon dioxide extraction (with and without ethanol as a co-solvent) was used. Addition of ethanol to supercritical CO2 resulted in more efficient removal of algal lipids and produced protein isolate with a good yield and protein recovery. The protein isolate extracted by the above mixture had an improved water solubility.     

Numerical analysis on noise of rotor with unconventional blade tips based on CFD/Kirchhoff method

A solver is developed aiming at efficiently predicting rotor noise in hover and forward flight. In this solver, the nonlinear near-field solutions are calculated by a hybrid approach which includes the Navier-Stokes and Euler equations based on a moving-embedded grid system and adaptive grid methodology. A combination of the third-order upwind scheme and flux-difference splitting scheme, instead of the second-order center-difference scheme which may cause larger wake dissipation, has been employed in the present computational fluid dynamics (CFD) method. The sound pressure data in the near field can be calculated directly by solving the Navier-Stokes equations, and the sound propagation can be predicted by the Kirchhoff method. A harmonic expansion approach is presented for rotor far-field noise prediction, which gives an analytical expression for the integral function in the Kirchhoff formula. As a result, the interpolation process is simplified and the efficiency and accuracy of the interpolation are improved. Then, the high-speed impulsive (HIS) noise of a helicopter rotor at different tip Mach numbers and on different observers is calculated and analyzed in hover and forward flight, which shows a highly directional characteristic of the rotor HIS noise with a maximum value in the rotor plane, and the HSI noise weakens rapidly with the increasing of the directivity angle. In order to investigate the effects of the rotor blade-tip shape on its aeroacoustic characteristics, four kinds of blade tips are designed and their noise characteristics have been simulated. At last, a new unconventional CLOR-II blade tip has been designed, and the noise characteristics of the presented CLOR-II model rotor have been simulated and measured compared to the reference rotors with a rectangular or swept-back platform blade tip. The results demonstrate that the unconventional CLOR-II blade tip can significantly reduce the HSI noise of a rotor.     

Analysis and improvement of ionospheric thin shell model used in SBAS for China region

The most frequently used mapping function for converting slant total electron content (STEC) to vertical total electron content (VTEC) uses a simplified ionospheric single layer model in satellite based augmentation system (SBAS). Aiming at ionospheric single layer model altitude variation, we analyzed the statistical characteristic of mapping function in systemic approach particular for the region of China, and then experimental mapping function was proposed. The experimental mapping function is used in SBAS ionospheric correction and the precision of vertical correction is compared with standard mapping function. The results show that conversion factor errors depend on latitude, time and elevation, experimental mapping function is helpful to the vertical TEC estimation and may improve the precision of SBAS ionospheric refraction correction especially for the low latitude region of China.     

旋转固体火箭发动机燃烧室内流场分析解

对带壁面质量注入的旋转通道(具有柱形装药旋转固体火箭发动机通道)内流场进行了研究。通过解析方法求解简化后的欧拉方程,获得了无粘情况下的旋转通道解析解。在此基础上,运用摄动法中的渐进展开匹配法求解引入粘性修正的切向动量方程,并获得解析解,表明切向速度分布解具有组合涡特征。分析了涡核半径与注入雷诺数及旋转转数的关系,得到了可压缩修正条件下的组合涡规律。     

Object image linking of earth orbiting objects in the presence of cosmics

In survey series of unknown Earth orbiting objects, no a priori orbital elements are available. In surveys of wide field telescopes possibly many non-resolved object images are present on the single frames of the series. Reliable methods have to be found to associate the object images stemming from the same object with each other, so-called linking. The presence of cosmic ray events, so-called Cosmics, complicates reliable linking of non-resolved images. The tracklets of object images allow to extract exact positions for a first orbit determination.     

视觉导航下基于H2/H∞的航迹跟踪

为了从理论上研究视觉导航系统的特性,首先在物理上将视觉导航系统划分为传感器(摄像头、激光测距仪)和视觉处理计算机。针对视觉处理计算机,建立视觉位置测量模型。将视觉位置测量模型的不确定性分为参数不确定性和输入干扰2种。然后通过仿真详细分析了视觉位置估计针对不同模型不确定性的敏感程度。最后在引入视觉位置测量模型不确定性的基础上研究H₂/H_∞混合鲁棒控制在航迹跟踪上的应用,并给出了保证航迹控制系统稳定性和跟踪性能情况下的视觉位置测量模型摄动范围,对计算机视觉算法的研究具有一定的指导意义。     

前置隔板对圆柱绕流影响的实验分析

对经典的圆柱绕流模型,运用前置隔板对流场进行控制。利用粒子图像测速(PIV)方法在自循环水槽中研究了雷诺数为1 800时,柔性和刚性2种不同刚度的前置隔板对圆柱绕流的影响。研究发现:柔性隔板自由端的弯曲增加了对流场的额外扰动,并且柔性隔板弯曲变形会诱导产生脱落涡,导致尾迹流场的主频发生变化。在圆柱下游流场,无隔板工况与柔性隔板工况的回流区长度相当,刚性隔板工况的回流区相较之下则更长。结果显示:前置隔板还能在一定程度上减小圆柱绕流的阻力。      

载人深空探测任务航天医学工程问题研究

航天医学工程问题关系到载人深空探测任务中的人员生存及健康。文章从人员长期生存的生命保障、变重力生理效应及防护、地外环境效应与防护、人员生理健康监测与维护、人员心理健康等方面的问题入手,分析了问题产生的原因及解决的必要性,并提出了解决思路,为后续深入开展相关关键技术的攻关提供参考。最后,以载人月球基地任务为案例,提出了生命保障、变重力防护、辐射及月尘防护、生理及心理健康监测及维护等问题的解决方案。     

月球探测软着陆与采样返回段弹道确定

针对月球探测中软着陆与采样返回段弹道计算问题,提出用数值逼近弹道确定方法。通过B样条对探测器状态进行建模,进而综合全弧段数据进行统计定轨的方法。由于样条法良好的数值逼近性能,使得该方法对探测器弹道异常复杂情况下的状态确定较为有效。对嫦娥三号探测器动力软着陆弧段进行了仿真与实测数据处理。分析了采样返回段的基本动力学与控制特征,为后续的嫦娥五号探测器的软着陆及其采样返回提供初步的可行弹道计算方法。在嫦娥三号探测器动力落月段实测数据处理中,通过评估,该段弹道确定精度优于100 m,其弹道末点与NASA的月球勘测轨道器（LRO）给出的结果差异优于50 m,证实了文章提出的软着陆弹道确定方法的有效性。