复合材料锥壳0°铺层的自动铺放成型方法研究

研究了一种基于自动铺带技术的复合材料锥壳0°铺层成型方法:根据锥壳构件尺寸将等宽预浸带数控分切成预定尺寸的直角梯形预浸带片,按特定方式铺放到锥壳表面并使每两片拼成一个等腰梯形单元,多个等腰梯单元形构成锥壳的0°铺层;并针对这种成型方法设计了一种实现锥壳0°铺层自动成型的装置.采用该方法及其设备可以实现锥壳0°铺层的自动化制造,提高成型效率、降低废料率、稳定工艺质量,降低装备制造成本.     

民机的一种新型布局形式——翼身融合体飞机

 讨论了一种区别于机翼与圆柱机身的传统民机外形——翼身融合体（BWB）外形。从给定容积下减少浸润面积和摩擦阻力的考虑发展出了翼身融合体的概念。在满足系列设计约束条件下讨论了适于大型（800座）客机的翼身融合体的技术和商业上的可能性。概念设计研究表明,翼身融合体外形可获得比常规外形更好的性能。巡航升阻比可从传统外形的19提高至23。480座的BWB外形与同量级的传统外形（A380-700）相比,最大起飞重量可减少18%,每座位燃油消耗可减少32%,具有良好的环保性。通过气动载荷分布规律的反设计,翼型修型和三维优化设计等气动设计方法可以有效减阻和提高BWB的气动性能。由于BWB的高度融合性,讨论了多学科优化设计方法的重要性和有效性。BWB概念能够发展成BWB系列机,进一步提高巡航马赫数也是可能的。     

Vibration Reduction of Open-chain Flexible Manipulators by Optimizing Independent Motions of Branch Links

In order to suppress vibration in flexible manipulators, a new type of manipulator mechanism with controllable local degrees of freedom is proposed. This mechanism consists of a main chain and some branch links. The main chain is of a flexible open-chain configuration with an end-effector installed at its tip, and the rigid branch links are able to perform active movements. It is proved by kinematics and dynamic analysis that, the branch links bear no direct kinematic relation to the main chain, but their independent motions can strongly affect the dynamic behavior and performance of the flexible manipulator. Then comes a new idea of suppressing vibration, in which independent motions of the branch links are used to suppress the undesired vibration of the flexible main chain through dynamic coupling. On this basis, an optimal method for reducing vibration of flexible manipulators is proposed. Finally, the effectiveness of this method is verified by numerical simulations.     

等离子体涡电磁散射特性及隐身性能

 针对非均匀等离子体在飞行器隐身中的应用,采用分段线性电流密度递归卷积时域有限差分（PLJERC-FDTD）方法计算等离子体涡及涡串电磁散射特性,分析等离子体涡对飞行器隐身性能影响。计算表明,等离子体涡在很大频率区间对电磁波吸收效果显著,RCS降低很大,具有明显的隐身效果。等离子体涡表现出一定规律性的极化特性,对L,S和C波段电磁波具有不同的吸收、反射特性。     

数控加工钨渗铜材料工件的工艺参数选用

针对钨渗铜材料切削性能差,在数控切削加工过程中易产生裂纹、崩料、变形等质量缺陷,从刀具、切削参数、切削液选用及走刀路线的安排等方面综合考虑,提出了解决问题的工艺方法。     

一种弹性低密度耐高温隔热涂层

针对固体火箭发动机实际使用的热环境要求,研制了一种弹性低密度耐高温隔热涂层,通过石英 灯辐射和电弧风洞试验对其进行了防热性能考核。该涂层密度为0. 62 g/ cm3,伸长率为25%,热导率为0． 18 W/ (m·K);在401℃时DSC 失重率仅为6. 6%;验证考核表明,采用1. 0 mm 涂层时,壳体与涂层界面温度最高 为77. 3℃,壳体背温度最高为44. 5℃。     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

冲击射流的彩虹纹影实验研究

超声速冲击射流在短距、垂直起降飞行器（S/VTOL）以及火箭发射等方面应用广泛,但是伴随着流场与噪声等诸多方面的问题。要研究这一类问题,必先研究这一类超声速流动的波系结构。文章利用彩虹纹影测量系统,对不同距离不同压比的冲击射流进行实验研究,得到了清晰的彩虹纹影实验结果,细致地呈现了冲击射流的波系结构。基于实验结果,对三种不同结构的冲击射流的波系结构进行了详细分析。发现喷嘴与挡板距离较大时,形成的射流结构与自由射流相似,壁面附近的射流区域不明显。随着距离减小,冲击射流出现壁面冲击区附近射流比较剧烈的现象。距离进一步减小时,出现滞止泡等结构,滞止泡的形状与压比相关。此外,实验表明冲击射流形成的马赫盘大小、形状与来流压比相关。     

Identification method for helicopter flight dynamics modeling with rotor degrees of freedom

A comprehensive method based on system identification theory for helicopter flight dynamics modeling with rotor degrees of freedom is developed. A fully parameterized rotor flapping equation for identification purpose is derived without using any theoretical model, so the confidence of the identified model is increased, and then the 6 degrees of freedom rigid body model is extended to 9 degrees of freedom high-order model. Bode sensitivity function is derived to increase the accuracy of frequency spectra calculation which influences the accuracy of model parameter identification. Then a frequency domain identification algorithm is established. Acceleration technique is developed furthermore to increase calculation efficiency, and the total identification time is reduced by more than 50% using this technique. A comprehensive two-step method is established for helicopter high-order flight dynamics model identification which increases the numerical stability of model identification compared with single step algorithm. Application of the developed method to identify the flight dynamics model of BO 105 helicopter based on flight test data is implemented. A comparative study between the high-order model and rigid body model is performed at last. The results show that the developed method can be used for helicopter high-order flight dynamics model identification with high accuracy as well as efficiency, and the advantage of identified high-order model is very obvious compared with low-order model.     

上下游干涉对转子叶片颤振特性的影响

使用自行开发的非定常流动数值模拟程序,分别考虑上、下游叶排干涉作用对转子叶片的颤振特性进行了研究,分析尾迹和势干扰对气动阻尼的影响规律.对转子叶片表面非定常压力进行傅里叶变换,使用能量法计算气动阻尼,研究不同叶片排轴向间距下气动阻尼的变化.通过考虑转静干涉效应的气动阻尼与单转子结果对比,总结了干涉作用对叶片颤振特性的影响规律;结果表明:上游导叶与转子一倍弦长间距时,获得正气动阻尼,与单转子预测的气动弹性稳定性结果相反.说明在进行颤振特性预测时必须考虑转静干涉作用;尾迹和势干扰的强度均随着轴向间距值的减小而加强,且都会加剧叶片气动弹性失稳.