置换反应中银纳米结构的变化

银纳米材料的特性及应用取决于银纳米结构的形貌、尺寸等因素,本文通过制备具有一定形态的银纳米结构,研究纳米结构生长和转变机制.采用AgNO3和Zn反应置换银纳米粒子.采用光学显微镜、TEM、SAED等分析手段,考察了银纳米材料的形貌和晶体结构随反应时间和AgNO3浓度的变化.结果表明:随着反应时间的延长,银枝晶由密集树枝结构转变成分形结构;随着AgNO3溶液浓度的增大,呈现出从树枝状多晶逐渐转变为单晶的过程.     

临近空间表面波等离子体减阻性能分析

为研究临近空间表面波等离子体减阻效果,基于流体宏观模型的基本特征,分析了表面波等离子体流动控制机理的基础,以飞艇为模型,对其在 0°攻角情况下的流场进行仿真计算,比较了不同激励器控制方案的减阻效果,研究了飞艇尾部区域的等离子体流动控制效果. 结果表明,表面波等离子体具有增加飞艇升力、减小飞艇阻力的效果;单侧控制方案最大减阻效果达7%左右,对称控制方案减阻效果明显优于单侧控制方案,最大减阻效果可达32%左右;表面波等离子体对飞艇尾部的流动分离具有很好的消除抑制作用.     

An analysis on combined GPS/COMPASS data quality and its effect on single point positioning accuracy under different observing conditions

With the rapid development of the COMPASS system, it is currently capable of providing regional navigation services. In order to test its data quality and performance for single point positioning (SPP), experiments have been conducted under different observing conditions including open sky, under trees, nearby a glass wall, nearby a large area of water, under high-voltage lines and under a signal transmitting tower. To assess the COMPASS data quality, the code multipath, cycle slip occurrence rate and data availability were analyzed and compared to GPS data. The datasets obtained from the experiments have also been utilized to perform combined GPS/COMPASS SPP on an epoch-by-epoch basis using unsmoothed single-frequency code observations. The investigation on the regional navigation performance aims at low-accuracy applications and all tests are made in Changsha, China, using the “SOUTH S82-C” GPS/COMPASS receivers. The results show that adding COMPASS observations can significantly improve the positioning accuracy of single-frequency GPS-only SPP in environments with limited satellite visibility. Since the COMPASS system is still in an initial operational stage, all results are obtained based on a fairly limited amount of data.     

Response of photosynthetic systems to salinity stress in the desert cyanobacterium Scytonema javanicum

The present study investigated the physiological and biochemical characteristics of Scytonema javanicum, a pioneer species isolated from desert biological crusts, under salinity stress. Pigment analysis showed that salinity decreased chlorophyll a and phycocyanin content, while low salinity increased carotenoid concentration and high salinity decreased carotenoid concentration. Salinity also inhibited CO₂ assimilation rate and photosynthetic oxygen evolution in this cyanobacterium. Chlorophyll a fluorescence transient parameters (φPo, φEo, ψO, RC/ABS, RC/CS, PI_ABS, and PI_CS) were decreased under salt stress, while dVo/dto(Mo), Vj and φDo were increased. The decrease of ETRmax and Yield and the change of chlorophyll a fluorescence transients showed that salt stress had an important influence on photosynthesis. These results indicated that the effects of salinity stress on photosynthesis in S. javanicum may depend on the inhibition of electron transport and the inactivation of the reaction centers, but this inhibition may occur in the electron transport pathway at the PSII donor and acceptor sites.     

两种用于NS-DSMC耦合方法的连续失效参数对比

NS-DSMC（Navier Stokes-Direct Simulation Monte Carlo）耦合方法是计算连续-稀薄跨流域流动的主要方法,应用过程中如何确定连续流域和稀薄流域的界面是此方法的关键问题之一,界面位置通常通过连续失效参数来判定.为合理选择连续失效参数,对目前广泛使用的两种连续失效参数Kn_Q和B参数进行了理论上的分析和比较,表明虽然他们建立的出发点不同,但在数学形式上具有一定相似性.通过圆柱绕流问题的数值试验进一步验证了两种连续失效参数具有一定对应关系.Kn_Q和B两种连续失效参数在NS-DSMC耦合方法中应用效果相差不大,但Kn_Q 的阈值0.05适用范围较广,而B参数的阈值对不同流动问题会有变化.      

电动VTOL飞行器双目立体视觉导航方法

研究了在未知的、动态的室内走廊环境中,采用双目立体视觉引导电动VTOL(Vertical Take-Off and Landing)飞行器安全飞行的方法.使用安装在飞机上的两个微型摄像头从不同的位置获取图像,由双目立体视觉理论恢复其周围环境特征点的三维坐标.采用角点匹配方法计算视差,实现无人机在走廊中的横向坐标定位.采用区域灰度相关算法进行立体匹配获取视差图,从视差图上检测出障碍物,并给出避障导航点.初步实验验证表明,该方法可行性较高,可以作为进一步研究的基础.      

四旋翼飞行器的非线性PID姿态控制

针对四旋翼飞行器的非线性姿态运动动力学模型,设计了一种新的几乎全局稳定的非线性PID (Proportional Integral Derivative) 姿态控制器.该控制器由一个线性PID的控制部分和一个惯性力矩补偿部分组成,可以抑制常值干扰和幅值有界且能量有界的干扰.数字仿真验证了该控制器对干扰的抑制作用.在搭建的姿态控制实验平台上进行了定点姿态跟踪控制实验.实验结果显示俯仰角和滚转角的误差均小于1°,验证了该控制器对小角度控制的有效性和对未建模动态的鲁棒性.      

气气喷嘴推进剂入口温度对燃烧和壁温的影响

以同轴双剪切气气单喷嘴为对象,对气气燃烧流场进行了数值模拟,并进行了研究,分析了喷嘴推进剂入口温度对燃烧性能和室壁温的影响,结果表明:推进剂温度变化引起的燃氧动量比变化对燃烧和壁温起主要影响;富氢燃气状态变化对燃烧和壁温的影响大于富氧燃气状态变化.试验验证了数值模拟结果.      

SRAM型FPGA单粒子翻转效应加固方法

应用重离子加速器和皮秒脉冲激光器开展Virtex-Ⅱ FPGA（Field Programmable Gate Array）单粒子效应加固方法有效性研究.实验结果表明,同时应用三模冗余和动态刷新加固方法能够完全纠正单粒子效应产生的功能错误.实验获得数据加密算法在不同单粒子效应加固方法下功能错误截面,发现少量的存储位翻转就可以导致程序功能错误;程序功能对存储位翻转较敏感.分析Virtex-Ⅱ FPGA不同加固方法在不同卫星轨道的有效性,同时应用动态刷新和三模冗余加固方法,可以完全校正由于存储位翻转造成的功能错误.重离子加速器和脉冲激光器实验结果同时表明,脉冲激光可以模拟重离子加速器研究单粒子效应加固方法有效性.     

轴对称羽流流场数值模拟和实验验证

针对在轨航天器羽流效应对航天器整体寿命的影响,在"DFH"系列卫星姿控发动机喷管羽流实验研究的基础上,建立喷管的轴对称模型,选取矩形计算区域,设定一定的边界条件和计算条件,采用轴对称单组分直接模拟蒙特卡罗(DSMC,Direct Simulation Monte Carlo)方法对相应实验状态的羽流流场进行数值模拟研究.通过对比数值模拟结果和实验测量结果,表明DSMC数值模拟羽流流场的计算结果符合实际流动规律,实验验证了所编制的轴对称DSMC数值模拟程序的正确性和有效性.