基于DSM的航天器信息建模方法及应用

将设计结构矩阵（DSM）技术应用于航天器研制的设计流程建模和信息建模,能够清晰准确地描述航天器各设计活动之间的信息耦合关系。根据航天器设计过程中跨分系统集成和协同设计的具体教学与培训需求,开发了一种基于DSM进行建模的工具软件,可用于建立一个基于设计参数信息的集成设计系统。根据其内在耦合关联关系,可实现各个分系统、各个模块、各个学科的参数信息一致和动态关联更新。     

圆轨道星座全球覆盖的充分必要条件

对采用圆轨道的星座，目前的研究基本上局限于实际应用方面，很少进行理论方面的研究，本文首次提出并证明了达到全球连续多重覆盖的充要条件。这对进行星座设计具有积极的指导意义。     

Effects of TADs on the F region of the mid-latitude ionosphere during an intense geomagnetic storm

Based on observations of two ionosondes at Wuhan and Kokubunji, this paper presents effects of TADs on the daytime mid-latitude ionosphere during the intense geomagnetic storm on March 31, 2001. During a positive ionospheric storm, the start of the enhancement of the foF2 (F2 peak plasma frequency) at Wuhan lags that at Kokubunji by 15 min, which corresponds to the time interval of traveling atmospheric disturbances (TADs’) propagation from Kokubunji to Wuhan. Associated with the uplifting of the hmF2 (height of F2 peak) caused by TADs, it is observed by the two ionosondes that the F1 cusp becomes better developed. Therefore, during a geomagnetic storm, TADs originating from the auroral oval may have a strong influence on the shape of the electron density profile in the F1 region ionosphere at middle latitudes. It is highly likely that TADs are responsible for the evolution of the F1 cusp.     

Sliding mode control based guidance law with impact angle constraint

The terminal guidance problem for an unpowered lifting reentry vehicle against a sta- tionary target is considered. In addition to attacking the target with high accuracy, the vehicle is also expected to achieve a desired impact angle. In this paper, a sliding mode control （SMC）-based guidance law is developed to satisfy the terminal angle constraint. Firstly, a specific sliding mode function is designed, and the terminal requirements can be achieved by enforcing both the sliding mode function and its derivative to zero at the end of the flight. Then, a backstepping approach is used to ensure the finite-time reaching phase of the sliding mode and the analytic expression of the control effort can be obtained. The trajectories generated by this method only depend on the initial and terminal conditions of the terminal phase and the instantaneous states of the vehicle. In order to test the performance of the proposed guidance law in practical application, numerical simulations are carried out by taking all the aerodynamic parameters into consideration. The effec- tiveness of the proposed guidance law is verified by the simulation results in various scenarios.     

一种折叠弹翼悬挂物的分离轨迹试验技术

提出了一种新的折叠弹翼悬挂物机弹分离轨迹试验技术,重点解决了在机弹分离过程中折叠弹翼动态展开时悬挂物的气动力获取问题。研究表明,提出的试验技术通过将悬挂物气动力修正方法引入到悬挂物分离安全性研究当中,准确地得到悬挂物的分离特性,解决了折叠弹翼悬挂物分离轨迹风洞试验技术瓶颈,为折叠弹翼悬挂物的投放分离安全性提供一套工程实用的解决方案。     

基于ANSYS的机翼动力学分析

针对无人机在挂载导弹飞行和发射导弹时,无人机机翼由于受到多种载荷影响所产生的应力应变,应用ANSYS软件动力学分析,计算模拟了机翼在受到多种载荷影响时所产生的应力分布和应变量。分析结果表明,由于外挂物重量和机翼周围气动流场的影响,机翼会产生不同程度的颤振和扭转,其研究结果对合理设计机翼结构具有一定的参考意义。     

对外直接投资的贸易效应——基于中美比较的视角

20世纪80年代以来,伴随着改革开放和国际产业转移,发达国家加快了对外投资步伐,中国也抓住这一机会成为世界上最大的对外直接投资吸引地。经过三十多年来的发展,如今中国企业也开始了＂走出去＂的脚步。对外投资对于一国的贸易有何影响,学界对此有很多研究。文章对1984~2012年中国和美国之间的双边直接投资和贸易进行检验,利用协整模型进行计量分析。分析结果表明：中国对美国的直接投资会增加中国对美国的进口,美国对中国的直接投资则会增加中国对美国的出口。     

三维可调的高精度顶尖尾座

Ｇ４８数控坐标磨机床是由计算机数控的连续轨迹坐标磨机床，这类机床的控制装置能同时对２个或２个以上的坐标轴进行连续控制，属于两轴半坐标数控机床。该机床有１个数控转台，可以使用数控转台加工轴类零件，但需要顶尖尾座配合。为此我们通过借鉴国内外高精度顶尖尾座...