逆合成孔径雷达信号处理方法研究进展

在简要评述国内外现有的逆合成孔径雷达（ISAR）信号处理的运动补偿和成象方法之后，介绍了南京航空航天大学ISAR课题组近年来在ISAR信号处理方法研究中取得的主要进展，包括基于多散射点定位观点的雷达成象观测模型，基于最大似然原理的同时运动补偿和成象方法，基于最大似然原理的多目标成象方法和基于时频分析的多目标成象方法，以及超分辩成象方法，文末指出了在ISAR信号处理方面有待进一步研究的问题。     

一种新的射频仿真目标位置控制方法与软件研究

针对射频目标仿真系统中目标位置的控制，本文通过对国内外目标位置控制的常用方法进行研究，提出一种新的通用目标位置控制方法，该方法适用于任何天线分布的面阵。利用这种新的方法编写了基于三元阵天线阵面的射频仿真目标位置控制软件，实现对多目标在天线阵面上多种轨迹运动下的高速准确的定位，并能实时监视目标的运动状态和运动轨迹。     

中值滤波的快速算法

提出了一种中滤波的快速算法，充分地利用相邻两次中值滤波窗口内数据的相关性。在运算过程中，通过对有序序列快速的对半查代和内插操作重构有序序列，从而得到各中值。本算法很大地提高了运算效率，计算机模拟表明该方法是有效的。     

神经网络在未来超分辨雷达中的应用

最新的技术发展已为研制超分辨雷达创造了条件。它能够突破普通雷达基于匹配滤波原理的分辨能力,而实现超分辨。超分辨雷达的巨大计算量通常来自求解非线性最小二乘问题时的多维搜索。本文针对这一问题,研究了雷达信号处理中的两个典型例子:(1)利用阵列处理检测个数已知而方向未知的雷达目标;(2)对波音727飞机进行超分辨距离多普勒成像。说明Hop-field神经网络通过集体运算能够求解各种困难的最优化问题,因而在未来的超分辨雷达中有广阔的应用前景。     

CAPP系统中特征造型描述法的应用

本文结合专为哈尔滨制氧机厂开发的实用型CAPP系统，对CAPP系统的研制进行了探索性的研究，该系统以Windows作为开发平台，在基于零件特征造型建模的基础上，运用面向对象编程技术完成了一个交互式信息输入子系统，实现了回转体零件CAPP系统的信息输入，这里主要介绍零件特征信息模型的建立与特征信息的数据结构。     

内喷管间隙宽度对线性塞式喷管性能的影响

为了了解内喷管间隙宽度对线性塞式喷管性能的影响，提出了对应着同一个内喷管的三种不同间隙宽度的塞锥。采用数值模拟的方法，得到了不同间隙宽度的线性塞式喷管在不同工况下的流场和性能。比较了不同间隙宽度对线性塞式喷管性能的影响，结果表明：增加内喷管间隙会增大线性塞式喷管的面积比和设计压比；内喷管间隙变宽，塞锥表面的压强下降，塞式喷管的性能下降，间隙宽度增大一倍，塞式喷管性能下降1％～3％。另外在计算过程中发现，内喷管的性能是整个线性塞式喷管性能的主要组成部分，占了整个塞式喷管性能的三分之二以上。     

How we will go to Mars

This article studies the efficiency of ejecting waste generated by the life support system (LSS) of a manned spacecraft to reduce initial mass on low earth orbit. The spacecraft is used for a long-duration interplanetary mission and is equipped with either a chemical or a nuclear-thermal propulsion system. For this study we simulate an optimal control problem for a given spacecraft maneuver. An impulsive approximation of the optimal interplanetary spacecraft trajectory is assumed, which allows us to reduce the general optimal control problem to hierarchic structure of 'outer' and 'inner' subproblems. This structure is analyzed using the Pontryagin's Maximum principle. Numerical results, illustrating the efficiency of waste ejection are shown for typical Earth-Mars transfer trajectories. This results confirm in theory that using a waste ejection system makes an early manned Mars mission possible without having to design and build new, advanced biological LSS.     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994–1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

复合材料壳体与喷管的卡环连接结构研究

较详细地对复合材料壳体与喷管卡环连接结构进行了有限元应力,应变分析,对卡环,接头及倒锥等多体接触问题进行研究;对“Ｉ”型及“Ｌ”型卡环结构分别进行了计算和比较,并给出计算结果及结果分析。     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994-1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.