天宫一号频繁轨控条件下快速测定轨精度及策略分析

2016年,中国将要执行空间站与货运飞船的快速交会对接试验,该试验要求飞船起飞后6 h完成与空间站的交会对接。工程实践中需要对飞船进行多次远导控制,其间留给快速定轨的数据时长最少可能只有5 min,这对短弧定轨精度提出了较高要求。利用天宫一号在轨运行期间实测数据开展了快速测定轨试验,试验频繁轨控条件下5 min数据时长的快速测定轨精度。试验结果表明,不同条件下短弧定轨精度差异较大,这为快速交会对接试验带来了较大风险。为了提高短弧定轨精度,制定了利用轨控前后数据联合解算轨控从而增加定轨数据弧段的方法提高短弧定轨精度的定轨策略。分析结果表明,该定轨策略有效提高了短弧定轨精度,可满足快速交会对接试验轨道维持控制要求。     

航天飞行器中舷窗温度场及换热的研究：外部界面处于第三类非线性边界条件

本文采用控制容积法,光线踪迹法结合谱带模型,研究航天飞机返回大气层时舷窗硅玻璃的非稳态复合换热。文章给出了界面S_2处于第三类非线性边界条件下,舷窗硅玻璃内部的温度场和进入机舱内部的热流密度。计算结果表明,如不考虑硅玻璃内部的辐射作用,对温度场影响不太大,但对进入机舱内的热流密度将会产生很大的误差。     

Application of the Method of Integral Manifolds for Construction of Resonant Curves for the Problem of Spacecraft Entry into the Atmosphere

The separation of motions into slow (precession) and fast (nutation) components in the problem of the entry of a spacecraft (SC) with a small asymmetry into the atmosphere is considered. For the separation of the slow and fast motions the method of integral manifolds is used together with the asymptotic method for singularly perturbed systems. The separation of motions allows one to isolate the frequencies that are functions of the slow variables of a system, and further on, after determining the integer relations between them, to construct the resonant curves (surfaces). This method gives the possibility to analyze the conditions of the emergence of resonances for a SC at angles of attack that are not small and when aerodynamic characteristics are nonlinear. Examples of the construction of resonant curves for a SC with typical aerodynamic characteristics are considered.     

童话之城——哥本哈根

哥本哈根位于波罗的海和北海之间的厄勒海峡西岸,集聚着充满童话气质的古堡与皇宫、乡村与庄园。不论是沉淀了古老历史的还是延续着皇族传奇的各类建筑,都鳞次栉比地坐落在这里。哥本哈根融合了古典与现代的艺术气息,阿肯艺术中心、路易斯安娜博物馆、国家博物馆、丹麦国家美术馆等众多艺术博物馆各领风骚。富有皇族气质的哥本哈根,贯穿着全年度的各种主题节庆,令狂欢从夏季一直延续到冬季。最著名的莫过于哥本哈根国际爵士音乐节,在每年7月将持续整整10天,着实是不容错过的年度盛会!     

Increased BLSS closure using mineralized human waste in plant cultivation on a neutral substrate

The purpose of this work was to study the full-scale potential use of human mineralized waste (feces and urine) as a source of mineral elements for plant cultivation in a biological life support system (BLSS). Plants that are potential candidates for a photosynthesizing link were grown on a neutral solution containing human mineralized waste. Spring wheat Triticum aestivum L., peas Pisum sativum L. Ambrosia cultivar and leaf lettuce Lactuca sativa L., Vitaminny variety, were used. The plants were grown hydroponically on expanded clay aggregates in a vegetation chamber in constant environmental conditions. During plant growth, a determined amount of human mineralized waste was added daily to the nutrient solution. The nutrient solution remained unchanged throughout the vegetation period. Estimated plant requirements for macro-elements were based on a total biological productivity of 0.04 kg day⁻¹ m⁻². As the plant requirements for potassium exceeded the potassium content of human waste, a water extract of wheat straw containing the required amount of potassium was added to the nutrient solution. The Knop’s solution was used in the control experiments.     

中国空中交通流量管理系统的组织设计——以工作地点为基础的多层次人机组织设计的应用

描述了人机系统的基本组成：人的控制系统和技术控制系统。由于控制对象的复杂性，将其整个活动划分为多个子活动，位于不同的工作地点，在每个地点建立相应的人机系统，这就构成了以工作地点为基础的人机系统。依据工作地点之间的联系，确立人机的一现多样性：集中式、分散式、层次式。根据目前中国空中交通流量管理的现状，参考以工作地点为的人机系统设计方法，建立多层次的中国流量管理组织结构，实现有效的人机合作，以此协调各方面的活动与关系，保证空中交通安全有序。     

Analysis of the Cyclotron Facility calibration and aircraft dosimetry results from the LIULIN-3M instrument.

The LIULIN-3M instrument is a further development of the LIULIN dosimeter-radiometer, used on the MIR spacestation during the 1988-1994 time period. The LIULIN-3M is designed for continuous monitoring of the radiation environment during the BION-12 satellite flight in 1999. A semiconductor detector with 1 mm thickness and cm2 area is contained in the instrument. Pulse high analysis technique is used to determine the energy losses in the detector. The final data from the instrument are the flux and the dose rate for the exposure time and 256 channels of absorbed dose spectra based on the assumption that the particle flux is normal to the detector. The LIULIN-3M instrument was calibrated by proton fluxes with different energies at the Indiana University Cyclotron Facility in June 1997 and had been used for radiation measurements during commercial aircraft flights. The calibration procedure and some flight results are presented in this paper.