合金元素及第二相对钨的影响

综述了活化烧结元素,合金化元素,杂质元素及化合物对钨合金组织和性能的影响,并对新型钨基合金及其复合材料的研究、开发提出了一些看法。     

关于精密度、正确度、准确度和精度

讨论指出以词义相近的名词精密度、正确度、准确度来定义不同的概念值得商榷；认为精密度和正确度在实际中极少应用，我国文件将精密度译为ｐｒｅｃｉｓｉｏｎ的合理性值得探讨；详细阐述了名词精度在国内的应用发展情况及其在实际使用中的不成文的约定概念；认为我国计量名词应与国际一致，对我国名词精密度等提出了修改意见：建议从我国计量名词中删去精密度和正确度，将ａｅｃｕｒａｃｙ译为精度（准确度），即精度和准确度等同使用。此外，就目前如何翻译ｐｒｅｃｉｓｉｏｎ提出了想法。     

Global Hybrid Simulation of Magnetic Reconnection in the Magnetosheath

A three-dimensional (3-D) global hybrid simulation is carried out for the generation and structure of magnetic reconnection in the magnetosheath due to interaction of an interplanetary Tangential Discontinuity (TD) with the bow shock and magnetosphere. Runs are performed for solar wind TDs possessing different initial half-widths. As the TD propagates through the bow shock toward the magnetopause, it is greatly narrowed by a two-step compression processes, a "shock compression' followed by a subsequent ``convective compression'. In cases with a relatively thin solar wind TD, 3-D patchy reconnection is initiated in the transmitted TD, forming magnetosheath flux ropes. Multiple components of ion particles are present in the velocity distribution in the magnetosheath merging, accompanied by ion heating. For cases with a relatively wide initial TD, a dominant single X-line appears in the subsolar magnetosheath after the transmitted TD is narrowed. A shock analysis is performed for the detailed structure of magnetic reconnection in the magnetosheath. Rotational Discontinuity (RD)/Time-Dependent Intermediate Shock (TDIS) are found to dominate the reconnection layer, which and some weak slow shocks are responsible for the ion heating and acceleration.     

基于疲劳寿命理论的膜盘联轴器型面设计

区别于传统的基于强度理论的膜盘联轴器型面设计方法,提出了一种基于膜盘联轴器动力学分析和疲劳寿命理论的型面设计方法.建立了分析膜盘联轴器应力及寿命的简化有限元模型,给出了作用在此模型上的边界条件和初始条件,建立了膜盘联轴器动静复合应力分析方法.根据动力学分析的结果,讨论了膜盘联轴器工作时,不同类型的载荷对其疲劳寿命的影响.计算对比了几种典型型面在不同复合载荷作用下的寿命;基于疲劳寿命理论对膜盘联轴器的型面设计给予评价,最后给出各典型型面的适用工况.     

直升机滑油散热器动态性能分析

滑油散热器的动态特性是直升机滑油冷却系统设计的基础,使用模块化集总参数法建立了直升机滑油散热器的动态仿真模型,采用Laplace变换建立动态传递函数,结合动态仿真模拟曲线的比较以及传递函数的分析,对热侧和冷侧入口温度阶跃变化时的热侧出口温度动态响应性能进行分析,得到了影响动态性能的重要影响参数——芯体蓄热时间常数τw以及热侧温度随流动时间τ变化的时间常数hτ,从而可通过改变这两个重要影响参数来有效改变散热器以及系统的动态延迟时间.通过散热器动态实验测量,验证了模型的正确性.研究成果可有效改进散热器以及系统的动态性能,以及指导散热器与系统的优化耦合设计.     

Modeling of the very high velocity impact process with respect to in-situ ionization measurements

This overview deals with very high impact velocities, where complete vaporization of an impacting cosmic dust particle is to be expected upon expansion from the high pressure high temperature state behind the stopping shock (v > 15 km/s). The topics discussed are the mechanics and thermodynamics of compression, adiabatic release, equation of state and nonequilibrium states upon expansion. The case of very high particle porosity (ρ 1 g/cm³) and the case of very small dust masses (m < 10⁻¹⁷ g) are discussed from what one presently knows. The possibility of three body collisions in the expanding gas phase is discussed briefly. The effect of oblique impact is discussed with respect to its relevance to the ionization process. The numbers communicated are up to the highest “experimental” impact velocities (80 km/s, Halley mission). As one goes to lower impact velocities (20 < v < 30 km/s) there is still complete vaporization of the dust particle but ionization out of the bulk of the particle becomes low. Other than thermal processes may become important. Ideas are outlined to understand their physical nature.     

IEEE488总线在动量轮测试中的应用

叙述了资源卫星动量轮的一般结构和开环测试原理。详细介绍了应用ＩＥＥＥ４８８总线构成的动量轮开环性能自动测试系统。说明了这个自动测试系统的系统构成以及测试项目、测试流程和获得的测试结果。并据此提出这个系统在卫星研制工作中具有推广价值。     

航天器热故障诊断专家系统推理机的设计

航天器在飞行过程中,经常发生各种故障,因此需要充分进行地面模拟试验.在航天器地面热试验的故障分析过程中,除了形成了可供故障诊断用的规则以外,还得到了许多具体的事例.后者很难用规则来准确地描述,但却是人类专家最珍贵的经验,必须加以利用.据此提出了基于事例推理和基于规则推理的混合推理机制,给出了具体的流程图,并就两种推理给出了相应的冲突消解策略.     

机翼热气防冰系统设计

利用热流体系统仿真分析平台Flowmaster和计算流体力学软件Fluent进行联合仿真,对机翼热气防冰系统进行了设计和性能分析.设计参数包括防冰系统笛形管热气喷口孔径、孔数及孔间距等参数.基于Flowmaster对所设计的供气管路进行供气流量分配计算.基于Fluent模拟防冰腔内流动与换热,计算了防冰腔的热效率.根据防冰热载荷及热效率结果预测每段缝翼防冰所需热气流量,引入参数供气余度来分析防冰系统热性能.所提出的热气防冰系统设计方法可为热气防冰系统的工程设计与优化提供重要的帮助.     

硅化物涂层电子束重熔表面改性技术

在Nb521铌合金表面采用料浆烧结法制备硅化物涂层,利用高频扫描电子束对硅化物涂层进行重熔处理,通过扫描电子显微镜对处理样品表面形貌进行组织结构分析。研究表明,经过电子束重熔处理,硅化物涂层表面陶瓷晶粒粒度降低,表面粗糙度降低,陶瓷颗粒之间烧结作用增强,重熔区域与未处理区域具有明显的边界,电子束能量分布较均匀,电子束重熔提高了硅化物涂层的抗氧化性能和抗热震性能。