电子接插件在线质量检测研究

近年来,电子信息产业的迅猛发展,作为配套支持的接插件的生产规模也不断扩大。由于电子设备厂商对接插件的质量要求越来越高,接插件的检测也得到了越来越多的重视。由于检测速度快、运行稳定可靠的特点,机器视觉检测技术被广泛用于对接插件外观质量的在线检测。本文应用机器视觉检测技术对电子接插件质量进行了在线检测研究,并以其典型的冲压质量缺陷的检测为例对机器视觉在线检测系统的构成、核心处理模块、应用中存在的问题以及解决问题的新方法进行阐述,最后针对系统的可靠性进行了分析。     

寒冷地区农村建筑围护结构热工性能优化及经济性研究

农村建筑热工性能较差,采暖季能耗居高不下。本文通过Dest软件建立模型,对寒冷地区农村建筑不同围护结构下能耗情况进行模拟,并建立P1-P2经济分析模型,以全生命周期费用最小或者净现值最大确定合理的外墙保温层厚度及窗户类型。     

Application of small-size antennas for estimation of angles of arrival of HF signals scattered by ionospheric irregularities

A modification of the Doppler Interferometry Technique is suggested to enable estimating angles of arrival of comparatively broadband HF signals scattered by random irregularities of the ionospheric plasma with the use of small-size weakly directional antennas. The technique is based on the measurements of cross-spectra phases of the probe radiation recorded at least in three spatially separated points. The developed algorithm has been used to investigate the angular and frequency-time characteristics of HF signals propagating at frequencies above the maximum usable one (MUF) for the direct radio path Moscow-Kharkiv. The received signal spectra show presence of three families of spatial components attributed, respectively, to scattering by plasma irregularities near the middle point of the radio path, ground backscatter signals and scattering of the sounding signals by the intense plasma turbulence associated with auroral activations. It has been shown that the regions responsible for the formation of the third family components are located well inside the auroral oval. The drift velocity and direction of the auroral ionosphere plasma have been determined. The obtained estimates are consistent with the classical conception of the ionospheric plasma convection at high latitudes and do not contradict the results of investigations of the auroral ionosphere dynamics using the SuperDARN network.     

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

LENS风洞试验返回器模型气动热特性模拟

国家数值风洞高超声速流动模拟软件HyFLOW的研制对打破国外同类软件的技术壁垒具有重要意义。与国外DPLR软件进行了对比研究，同时系统介绍了HyFLOW软件求解器的数值方法、物理化学模型以及壁面催化特性计算模型等主要方法，采用典型算例对有限催化模型进行了数值验证，最后基于LENS风洞试验146 mm返回器标模外形开展了高超声速气动热特性数值模拟。研究结果表明，HyFLOW软件在高超声速热化学非平衡流动模拟与评估方面的气动力计算精度高，与国外同类软件DPLR相当，同时其壁面催化条件下的气动热计算精度可靠，可信度高。     

Erratum to: Use of the DBM Model to the Predict of Arrival of Coronal Mass Ejections to the Earth

Cosmic Research - An Erratum to this paper has been published: https://doi.org/10.1134/S0010952521120017     

基于机器视觉的药用铝箔印刷品质检测系统

为适应制药行业对药用铝箔印刷品质的严格要求,在分析了印刷过程中对微小针孔、正面文字缺陷以及反面细小异物的检测需求后,开发了一套基于机器视觉的药用铝箔印刷品质检测系统。系统选配了线阵CCD相机、条形LED光源等硬件,搭建了高实时性、高清晰度的图像采集环境;采用基于Win Sock网络通信的系统架构作为检测软件,将多台工控机的处理结果通过网络通信传输给中控系统。经测试表明:此检测系统在现场能够稳定、高效运行,提高了药用铝箔印刷品质检测的自动化程度。