运载火箭测发控网络设计

运载火箭测试发射控制系统对数据处理能力、数据通信能力的要求越来越高。本文采用最新的网络通信技术,结合CZ-3A运载火箭测发控网络的实际设计需求和设计原则,概要介绍了运载火箭测发控网络的特点,着重从测发控网络的拓扑结构、双网卡捆绑技术、静态路由技术等五方面详细阐述了测发控网络的设计,最后通过测发控网络的功能测试验证了该设计的可靠性和先进性。     

基于数字近景摄影测量的天线变形测量

文章介绍了基于数字近景摄影测量原理的天线变形测量方法。该方法利用2台CCD相机交会摄影来获取被测面图像,并对被测面上特殊标志点进行中心坐标提取,然后利用光束法平差解算标志点中心坐标。测量精度可达到1:50000,可用于卫星天线研制过程中空间环境模拟试验的检验,为卫星天线在轨正常工作提供可靠性保证。     

空间微小碎片累积作用下材料光学性能退化预示模型适用性研究

航天器在轨服役期间会遭受到大量空间微小碎片和微流星体的撞击作用,其中的微米级粒子将在航天器表面产生大面积砂蚀现象,并使材料或器件功能衰退。文章介绍了NASA空间微小碎片累积损伤材料光学性能退化预示模型并推导了两个预示模型之间的关系。利用ORDEM2000碎片分布模型估算了K8玻璃累积损伤面积。以K8玻璃为例,对比研究了两个预示模型的适用性。结果表明,当航天器外表面损伤程度小于40%,可利用Canoon模型评价和预示材料光学性能退化规律;当航天器外表面损伤程度大于40%,需利用Mirtich模型评价和预示材料光学性能退化规律。     

逆金字塔式安全着陆点选择方法

针对现有地外天体软着陆安全着陆点选择方法的不足,设计了逆金字塔式安全着陆点选择方法,结合着陆器的落点精度和自主避障及地形坡度适应能力,建立了基于平整点、安全着陆点、可靠避障点和标称着陆点的地形安全性分析与定量搜索模型,该模型呈四层逆金字塔结构,每一层搜索的结果作为下一层搜索的输入,从弱约束到强约束逐步收敛至100%地形安全着陆区,嫦娥五号探测器飞行结果表明该方法能够快速确定安全着陆区及标称着陆点,并有效指导着陆下降过程的标称航迹设计和轨道控制策略制定。     

Application of CCD drift-scan photoelectric technique on monitoring GEO satellites

Geosynchronous Earth Orbit (GEO) satellites are widely used because of their unique characteristics of high-orbit and remaining permanently in the same area of the sky. Precise monitoring of GEO satellites can provide a key reference for the judgment of satellite operation status, the capture and identification of targets, and the analysis of collision warning. The observation using ground-based optical telescopes plays an important role in the field of monitoring GEO targets. Different from distant celestial bodies, there is a relative movement between the GEO target and the background reference stars, which makes the conventional observation method limited for long focal length telescopes. CCD drift-scan photoelectric technique is applied on monitoring GEO targets. In the case of parking the telescope, the good round images of the background reference stars and the GEO target at the same sky region can be obtained through the alternating observation of CCD drift-scan mode and CCD stare mode, so as to improve the precision of celestial positioning for the GEO target. Observation experiments of GEO targets were carried out with 1.56-meter telescope of Shanghai Astronomical Observatory. The results show that the application of CCD drift-scan photoelectric technique makes the precision of observing the GEO target reach the level of 0.2″, which gives full play to the advantage of the long focal length of the telescope. The effect of orbit improvement based on multi-pass of observations is obvious and the prediction precision of extrapolating to 72-h is in the order of several arc seconds in azimuth and elevation.     

Exploring mission planning method for a team of carrier aircraft launching

High-level efficiency and safety are of great significance for improving the fighting capability of an aircraft carrier. One way to enhance efficiency and safety level is to organize the carrier aircraft into combat effectively. This paper studies the mission planning problem for a team of carrier aircraft launching, and a novel distributed mission planning architecture is proposed. The architecture is hierarchical and is comprised of four levels, namely, the input level, the coordination level,the path planning level and the execution level. Realistic constraints in each level of the distributed architecture, such as the vortex flow effect, the crowd effect and the motion of aircraft, are considered in the model. To solve this problem, a distributed path planning algorithm based on the asynchronous planning strategy is developed. The proposed Mission Planning Approach for Carrier Aircraft Launching(MPACAL) is validated using the setups of the Nimitz-class aircraft carrier.Compared to the isolated planning architecture and the centralized planning architecture, the proposed distributed planning architecture has advantages in coordinating the launch tasks not only belonging to the same catapult but also when all different catapults are considered. The proposed MPACAL provides a modeling method for the flight deck operation on aircraft carrier.     

激光雷达对沉潜油探测的探索*

目前,人们对于海洋沉潜油的规律研究及控制水平较低,特别是探测30m深度以内的浅海地区的沉潜油分布信息,其主要原因是缺乏快速有效的探测手段。北京遥测技术研究所开发水下探测激光雷达样机,利用激光在海水中良好的透过特性,用于对水下沉潜油的探测以及对海底等目标的高精度探测。样机完成在水池中进行水下沉潜油的模拟探测试验,对沉潜油样本的典型激光回波信号进行采集分析,并测量模拟探测深度。试验结果基本符合设计预期,为进一步提升激光雷达沉潜油探测能力打下良好基础。     

运载火箭晃动分析中知识模型的构建及应用

为了改变传统方法所实现的运载火箭晃动分析计算程序结构固定、缺乏灵活性、不能根据不同的使用场景自发完成不同计算任务的问题，利用本体理论和方法，将领域知识解决实际问题的过程抽象为决策知识引导应用单元执行的过程模型。根据建立的模型，从晃动分析相关领域知识中剥离出决策节点和应用单元，再通过决策节点重构决策知识，最终实现决策知识引导应用单元完成晃动计算。最后利用本体OWL语言实现决策节点重构决策知识，并开发了基于本体的火箭晃动计算分析软件模块，实现了分析计算知识的公用性、可拓展性和配置灵活性，为快速、智能化的专业分析计算提供借鉴。     

舱体入水工况参数对冲击特性的影响分析

为分析大型舱体返回入水时入水垂直速度等工况参数对其冲击特性的影响,提出一种基于任意拉格朗日欧拉法的舱体入水过程模拟方法,应用球底结构入水问题理论计算方法验证该模拟方法的有效性。通过对不同入水工况的有限元模拟,分析入水垂直速度和入水角度对冲击特性的影响。结果表明本文建立的舱体-流体有限元模型能够有效模拟舱体入水过程,舱体冲击加速度峰值与入水垂直速度成正比,舱体以一定角度入水能够降低入水过程的冲击加速度。研究结果可以为新型舱体的结构设计和入水冲击试验提供指导,从而减少试验次数,缩短开发周期。