石英挠性加速度计在角度检测中的应用

随着科学技术的进步,角度检测在现代工业体系中占有重要地位.现有角度检测设备因其测量范围、测量精度和功耗等局限,而逐渐不能满足测量要求.采用石英挠性加速度计传感器、AD7734与ARM MCU组合而成的一种新型倾角测量仪,通过对石英挠性加速度计的电流信号进行调理和AD采集,以及对采集的数据进行滤波处理,解算出倾角,通过标准RS485通信接口将数据传输到PC机上显示.实验表明:在0°～ 30°角度测量范围内,该系统倾角测量精度可以达到±0.01 °,具有很好的工作稳定性.同时,该倾角测量仪具有体积小、精度高、重量轻、功耗低等优点,可广泛应用到桥梁架设、国防军事、地质勘探、土木工程、石油钻井、航空航天、航海、精密加工等领域.     

导弹靶弹弹道机动变轨通用控制指令设计

导弹进行一定强度的机动飞行,就能够提高突防能力,因而,在军事训练中需要具有末端机动变轨能力的靶弹.针对靶弹机动变轨弹道的设计问题,提出变轨通用控制指令设计形式,利用此设计可使靶弹位移与过载指令控制信号协调配合,控制靶弹实现跃升机动、蛇行机动、摆式机动和螺旋机动等变轨形式.通过仿真证明,此设计的变轨弹道通用控制指令,可以满足靶弹跃升机动、蛇行机动、摆式机动和螺旋机动等各种变轨形式的弹道设计要求.     

基于响应面近似技术的平流层飞艇协同设计优化

针对平流层飞艇多学科设计优化问题,引入协同优化算法,分析基于响应面近似模型的协同优化方法CO/RSA的执行步骤和特点,并介绍响应面近似模型的构建方法;建立平流层飞艇各学科模型,并对学科间耦合关系进行分析;运用建立的气动/推进、结构、能源三个耦合子系统的学科分析模型和系统优化模型,以平流层飞艇总质量最小为优化目标,综合考虑浮重、推阻和能源平衡,采用CO/RSA方法对平流层飞艇进行设计优化.结果表明:所建立的平流层飞艇的MDO模型是合理的,CO/RSA算法应用于飞艇总体设计优化是有效的,研究结果可为平流层飞艇方案论证和方案设计提供参考.     

民用飞机试飞阶段人为因素适航审定技术研究

随着飞机各系统可靠性的不断提高,人为失误逐渐成为系统失效或造成飞行事故的主要因素,已成为设计及适航审定部门关注的重难点问题.当前国内外对于如何验证人为因素是否满足相关适航条款的要求仍处于理论探索阶段.针对上述问题,基于CCAR-25部条款分析试飞阶段民用飞机人为因素适航审定过程,包括基于SHELL模型及T.E.S.T矩阵的人为因素审定条款筛选,基于MOC5&MOC6的试验机符合性验证方法,并基于模糊评判方法给出数据分析实例.本文提出的人为因素适航审定思路及验证方法具有一定创新性,已在试飞阶段ARJ21-700飞机上初步应用,可为后续C919等民用飞机人为因素设计和适航审定提供技术支持和方法保证.     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

商用飞机驾驶舱造型设计特征研究

介绍了国内外商用飞机驾驶舱设计的历史及现状,在分析多类飞机驾驶舱造型设计图片资料的基础上,探讨主要飞机制造商驾驶舱造型设计的特征。依据驾驶舱造型的相似性,对国际上12家商用飞机制造商的66款机型的驾驶舱进行聚类分析和多维尺度分析,挑选出10款有代表性的驾驶舱。在提取代表性驾驶舱造型特征线后,分析主要飞机制造商的驾驶舱造型设计特点及差异,为新型飞机驾驶舱造型设计提供参考。     

亚声速进气道设计敏感参数仿真分析

对不同气动布局的两种亚声速进气道建模,并针对两种进气道的敏感参数进行分析。通过对背部双发布局飞机进气道的隔道高度和喉道设计马赫数参数的研究可知,隔道高度增大或者喉道设计马赫数减小,使得进气道出口总压恢复系数增大,增量约0.5%。而对背部单发复杂形状进口(M型进口)布局飞机进气道的喉道形状研究显示,喉道形状越接近进口形状,进气道性能越好,较其他喉道形状进气道,M型喉道进气道出口总压恢复系数最高,最大增量约为1.5%。     

美国NASA的适航气动研究及启示

飞机适航管理是以民用航空器为对象的强制性、法规性和技术性飞行安全管理。简述美、欧等世界航空大国飞机适航管理及适航规章;研究美国NASA在飞机适航领域开展的气动研究工作;探讨我国国家空气动力试验机构服务于适航工作的途径。     

二元双喉道射流推力矢量喷管流动参数影响的数值研究

采用数值模拟方法研究了不同流动参数对二元双喉道射流推力矢量喷管(Dual-throat fluidic Thrust-vectoring Nozzle,DTN)内流特性和推力矢量控制效果的影响。结果表明,DTN在非推力矢量情况下,NPR在3~4范围时,推力系数较大,达到0.968,而流量系数较小,仅为0.93;NPR再增大,推力系数迅速下降。在推力矢量情况下,落压比一定时,随着次流流量比的增加,推力矢量角增加,而流量系数、推力系数、推力矢量效率减小;次流流量比一定时,随着落压比的增加,推力矢量角减小,系统推力系数先增加后减小,流量系数略微增加。