阻旋栅对密封静力与动力特性影响的数值分析与实验研究

密封动力特性对旋转机械转子系统稳定性影响较大,在密封入口端部设置阻旋栅是提高密封稳定性的有效方法。设计加工了无/有阻旋栅共5种密封结构,从数值分析与实验研究两个方面研究阻旋栅对密封静力与动力特性的影响规律。建立阻旋栅密封静力特性CFD理论模型,数值分析阻旋栅对密封泄漏量、切向速度以及周向压力分布的影响;应用不平衡同频激励法实验研究阻旋栅对密封动力特性的影响。研究结果表明:阻旋栅可降低密封的泄漏量,减小密封内流体的切向速度,进而降低密封内流体的周向压力差,且随着阻旋栅周向稠度与径向长度的增加,这种作用逐渐增大,这是阻旋栅抑制气流激振力的主要原因;预旋是密封产生交叉刚度的重要因素,密封的交叉刚度随进出口压比与转速的增加而增大;阻旋栅可有效降低密封的交叉刚度,增加密封的主阻尼,提高密封的稳定性。本文研究揭示了阻旋栅抑制密封气流激振力的机理,为设计阻旋栅密封提供理论依据。     

基于跟踪微分器的高超声速飞行器Backstepping控制

针对存在模型参数不确定和外部干扰的高超声速飞行器（HFV）跟踪控制问题,提出一种基于Backstepping方法的抗饱和非线性控制器。将飞行器纵向动力学模型分为速度子系统和航迹倾角子系统,然后针对每个子系统单独设计控制器。设计跟踪微分器获得信号的一阶导数,用以估计系统中的不确定干扰项和避免"微分项膨胀"问题。控制器设计过程考虑了控制量发生饱和的情况。基于Lyapunov理论证明了闭环系统信号的稳定性。与传统高超声速飞行器Backstepping方法相比,所设计的控制器采用待跟踪状态与理想控制指令之间的实际误差作为反馈量,放宽了对系统干扰项的限制,提高了控制器对控制增益变化的适应性,进而提高了闭环系统的跟踪控制性能。对比仿真结果验证了所设计方法的有效性。     

小天体软着陆中的地面特征区域提取与跟踪算法

考虑到自主导航过程中的特征区域检测与跟踪问题,提出了一种新的跟踪算法。该算法是基于DIMES框架。首先,对在软着陆过程中拍摄的行星表面图像进行亮度均衡化,对处理后的图像进行二值化;然后,对二值化特征区域进行模板匹配找出高度相关位置点;最后,根据特征区域之间的几何关系确定特征区域的搜索范围,再分别提取这些相关点所代表区域的特征向量,并且与模板的特征向量进行相似性分析从而找到相似性最大的位置点。通过两组小行星表面图片进行分析验证得到了较好的效果。     

The impact of orbital errors on the estimation of satellite clock errors and PPP

Precise satellite orbit and clocks are essential for providing high accuracy real-time PPP (Precise Point Positioning) service. However, by treating the predicted orbits as fixed, the orbital errors may be partially assimilated by the estimated satellite clock and hence impact the positioning solutions. This paper presents the impact analysis of errors in radial and tangential orbital components on the estimation of satellite clocks and PPP through theoretical study and experimental evaluation. The relationship between the compensation of the orbital errors by the satellite clocks and the satellite-station geometry is discussed in details. Based on the satellite clocks estimated with regional station networks of different sizes (∼100, ∼300, ∼500 and ∼700 km in radius), results indicated that the orbital errors compensated by the satellite clock estimates reduce as the size of the network increases. An interesting regional PPP mode based on the broadcast ephemeris and the corresponding estimated satellite clocks is proposed and evaluated through the numerical study. The impact of orbital errors in the broadcast ephemeris has shown to be negligible for PPP users in a regional network of a radius of ∼300 km, with positioning RMS of about 1.4, 1.4 and 3.7 cm for east, north and up component in the post-mission kinematic mode, comparable with 1.3, 1.3 and 3.6 cm using the precise orbits and the corresponding estimated clocks. Compared with the DGPS and RTK positioning, only the estimated satellite clocks are needed to be disseminated to PPP users for this approach. It can significantly alleviate the communication burdens and therefore can be beneficial to the real time applications.     

气球型深空探测器技术研究进展

气球型深空探测器能够大大提高深空探测的机动能力,它不仅可以获取区域范围内的高分辨率观测数据,而且还可实现不同高度大气的原位测量。文章针对气球型深空探测器按技术特征进行了分类,并简述了各类气球探测器的原理和特点,重点总结了各类气球探测器在金星、火星和土卫六上应用的研究现状。针对我国未来的气球型深空探测器技术发展,提出首先以火星热气球为发展方向,与地球临近空间浮空器技术的发展彼此借鉴,促进关键技术领域的技术突破等建议,可为我国未来深空探测提供参考。     

Rapid design and optimization of low-thrust rendezvous/interception trajectory for asteroid deflection missions

Asteroid deflection techniques are essential in order to protect the Earth from catastrophic impacts by hazardous asteroids. Rapid design and optimization of low-thrust rendezvous/interception trajectories is considered as one of the key technologies to successfully deflect potentially hazardous asteroids. In this paper, we address a general framework for the rapid design and optimization of low-thrust rendezvous/interception trajectories for future asteroid deflection missions. The design and optimization process includes three closely associated steps. Firstly, shape-based approaches and genetic algorithm (GA) are adopted to perform preliminary design, which provides a reasonable initial guess for subsequent accurate optimization. Secondly, Radau pseudospectral method is utilized to transcribe the low-thrust trajectory optimization problem into a discrete nonlinear programming (NLP) problem. Finally, sequential quadratic programming (SQP) is used to efficiently solve the nonlinear programming problem and obtain the optimal low-thrust rendezvous/interception trajectories. The rapid design and optimization algorithms developed in this paper are validated by three simulation cases with different performance indexes and boundary constraints.     

星上控制力矩陀螺群隔振平台的动力学特性

为能够给星上有效载荷提供一种超静环境,提出一种星上控制力矩陀螺群(CMGs,Control Moment Gyroscopes)的隔振方案,并对所使用的隔振平台的动力学特性进行研究分析.首先介绍了不同参数模型的隔振元件工作原理和参数特性;其次利用牛顿-欧拉法对含有隔振平台和CMGs的卫星进行动力学建模;最后通过频域和时域的方法分析并对比了各个参数模型下的隔振平台力衰减特性以及对星体姿态稳定度的改善程度.结果表明:两参数加调谐质量阻尼器模型下的隔振平台对共振峰值有一定的衰减作用,三参数模型下的隔振平台在力衰减和对姿态稳定度的改善程度上要明显优于其他2种模型.     

搅拌摩擦焊接头隧道类缺陷等强补焊工艺

针对搅拌摩擦焊接头隧道类缺陷等强补焊的应用要求,开发了基于TIG焊熔补材料、搅拌摩擦焊增强组织性能的等强补焊工艺,对补焊后的接头进行了微观组织观察与力学性能分析,评价了补焊工艺对接头性能的影响.结果表明,对焊缝同一位置进行不大于三次的重复搅拌摩擦焊,接头力学性能不会明显下降;TIG熔补焊缝经再次搅拌摩擦焊后,其焊缝组织与搅拌摩擦焊焊缝组织特征相似,不会导致接头组织恶化.采用本文开发的等强补焊工艺对某型号火箭液氧贮箱纵缝的隧道缺陷进行了等强补焊,表明该方法有效可行.     

利用自然能临近空间浮空器的热特性分析

为解决临近空间浮空器驻留期间面临的“超热”、“超压”和“定点抗风”等难题,研究了一种新型的临近空间浮空器,其利用自然界的热能和风能,变“不利”为“有利”,通过简易可行的技术手段实现飞行高度和轨迹的控制,从而实现持久区域驻留。首先建立该新型浮空器的稳态热平衡模型并进行超热值的估算,然后分析系统参数。计算结果表明蒙皮的太阳吸收率和红外发射率对超热值有着重要影响,合理地选择热控涂层可以满足该新型浮空器的设计要求。