重型燃气轮机燃烧过程的反应动力学数值模拟

为了阐明重型燃气轮机燃烧过程的反应动力学特性,采用Gri_3.0,NUI_Galway与USC_2.0动力学模型对甲烷燃料在定容燃烧反应器中的燃烧特性进行了数值计算,并与实验结果进行了对比分析,确定了甲烷燃料的反应动力学模型;耦合该反应动力学模型与CFD计算软件,对燃用甲烷燃料的重型燃气轮机燃烧室单个火焰筒的燃烧过程进行了反应动力学分析,并与相应实验结果进行了对比分析。结果表明:与NUI_Galway及USC_2.0动力学模型相比,采用Gri_3.0动力学模型计算得到的甲烷燃料多工况下的燃烧特性与实验值吻合较好;在该重型燃气轮机燃烧室单个火焰筒中,在火焰筒头部与主燃区同时存在两个明显的呈对称状态的回流区;在该火焰筒中的高温区域,O,OH与H等活性组分以及CO2的摩尔分数达到最大,而在低温区域CO的摩尔分数达到最大;同时,与实验值相比,采用Gri_3.0动力学模型计算得到的单个火焰筒的出口平均温度略高约4K,热点温度高约197K。     

基于预警直升机的驱护舰编队防空作战目标威胁评估

空中威胁尤其是各种平台发射的反舰导弹日益成为编队主要的威胁因素。防空作战中,利用舰载预警直升机前出探测以提供早期预警信息是提升驱护舰编队防空作战能力的主要措施。目标威胁评估是预警直升机预警探测的重要环节。根据当前空中作战平台性能发展变化,选取多个威胁指标,采用改进的TOPSIS建立评估模型,并用实例仿真验证其可行性,为编队辅助决策提供依据。     

高职高专光纤通信课程改革的探索

光纤通信课程是高等院校通信专业极为重要的一门专业主干课程.针对高职高专的特点,文章探讨了光纤通信教学和实践的课程设置与内容安排, 并结合实际教学经验提出了改进措施.     

模拟中性大气边界层中污染物传输与扩散的动力相似讨论

文章从湍流雷诺数相等出发,推导出风洞中模拟中性大气边界层动力相似准则一充分发展的湍流中,运动相似的流动动力也相似。文章还讨论了模拟烟流抬升和扩散的相似准则,概述了国内外一些主要实验室应用的近似模拟技术。     

A solar type U burst in the decimetric range

This paper analyzes a Type U burst at 1.0 – 2.8 GHz which occurred between 12:36:26 – 12:36:32 UT on 1992 August 22, observed by Ond ejov Observatory, Czech Republic. This may be the first example of Type U bursts in the decimetric range, as far as we know. From analysis we came to the following conclusion: (1) The frequency drift rates of the ascending and descending branches are 1.25 and 0.225 GHz/s, respectively, and the velocities of the electron beam are 0.38 c and 0.26 c, respectively; (2) The burst decay of the ascending branch is larger than that of the descending branch; (3) The variations of the maximum frequencies of instantaneous spectra with time appear as from the highest (1.92 GHz) to the lowest (1.0 GHz), then toward higher frequency (1.53 GHz) (this is consistent with that predicted by plasma emission theory); (4) The bandwidths of the ascending branch are about twice that of the descending branch (this may be caused by the larger drift rates of the ascending branch); (5) The temperature of the coronal loop apex is 6.3 × 10⁶ K; (6) The magnetic field at the top of the loop is greater than 9.2 G; (7) This U burst emission is plasma radiation at the second harmonic.     

卫星用半导体器件失效模式和机理分布

以中国空间技术研究院电子元器件可靠性中心1987～1990四个年度数百份失效分析报告为依据,得到卫星用半导体器件解剖前失效模式分布:逻辑失控占36.3%,开路占22.2%等;失效机理分布:铝腐蚀占1 6.3%,使用不当占14.6%等。该项研究以第一手数据首次全面、系统指出卫星用器件失效模式和机理。为卫星可靠性设计、优选器件厂及器件厂采取措施提供重要依据。     

复杂动力学模型下星载天线跟瞄控制技术研究

针对星载天线动力学复杂这一问题,从天线系统刚柔耦合动力学建模、指向跟踪控制以及振动抑制等方面研究了柔性星载运动部件的指向控制方法。首先,通过描述系统几何拓扑关系建立系统运动学方程,从而简化动力学建模过程;之后,利用假设模态法,对天线反射面挠性进行建模;最后,将拉格朗日方程与挠性关节模型相结合,从而建立了星载天线非线性刚柔耦合动力学模型。在以上复杂动力学建模的基础上,采用分层设计的思路进行了控制策略设计：先运用基于计算力矩法的滑模控制器得到不考虑挠性关节的耦合控制律,从而保证卫星基体的稳定性以及天线挠性反射面的振动抑制;再使用反步法对挠性关节进行控制,实现对天线反射面的指向精度控制。最后,讨论了动力学参数不确定性对系统跟踪指向控制的影响并采用数学仿真的方式验证了相关动力学模型与控制算法。仿真结果表明该方法能较好地实现对星载天线的指向跟踪控制以及振动抑制,提高星载天线的动态指向精度。     

Orbit determination and prediction of GEO satellite of BeiDou during repositioning maneuver

In order to establish a continuous GEO satellite orbit during repositioning maneuvers, a suitable maneuver force model has been established associated with an optimal orbit determination method and strategy. A continuous increasing acceleration is established by constructing a constant force that is equivalent to the pulse force, with the mass of the satellite decreasing throughout maneuver. This acceleration can be added to other accelerations, such as solar radiation, to obtain the continuous acceleration of the satellite. The orbit determination method and strategy are illuminated, with subsequent assessment of the orbit being determined and predicted accordingly. The orbit of the GEO satellite during repositioning maneuver can be determined and predicted by using C-Band pseudo-range observations of the BeiDou GEO satellite with COSPAR ID 2010-001A in 2011 and 2012. The results indicate that observations before maneuver do affect orbit determination and prediction, and should therefore be selected appropriately. A more precise orbit and prediction can be obtained compared to common short arc methods when observations starting 1 day prior the maneuver and 2 h after the maneuver are adopted in POD (Precise Orbit Determination). The achieved URE (User Range Error) under non-consideration of satellite clock errors is better than 2 m within the first 2 h after maneuver, and less than 3 m for further 2 h of orbit prediction.     

超燃冲压发动机燃烧室出口温度场分布CARS测量

针对超燃冲压发动机研究中对燃烧室出口温度场的测量需求以及暂冲式超燃冲压发动机燃烧台架试验中的应用难点,开发了适用于瞬态燃烧场温度测量的单脉冲相干反斯托克斯拉曼反射（CARS）系统及CARS光谱计算和温度反演软件CARSCF。采用USED相位匹配方式来降低湍流影响,结合多尺度小波分析方法来实现CARS光谱降噪处理,提高信噪比。在暂冲式脉冲燃烧风洞上开展了来流马赫数2.6条件下超燃冲压发动机燃烧室出口温度测量试验,获取了超声速来流（冷态）建立、H₂点火加热空气、建立超声速燃烧流场直至试验结束过程中的燃烧室出口温度,以及煤油/空气燃烧时燃烧室出口温度场分布。结果显示,超声速冷流时温度处于低温（约205K）状态,随着H₂点火加热来流空气,来流温度上升至853K;随着煤油/Air点火,温度急剧上升,稳定燃烧状态下燃烧流场温度为1970K±144K。燃烧室出口截面温度场分布测量结果显示,高温区位于燃烧室出口截面上侧区域,而燃烧室出口截面上中间区域的温度低于上下两侧。燃烧室出口温度分布CARS测量结果与火焰自发光成像结果一致,表明单脉冲CARS技术用于瞬态燃烧流场温度测量的可行性。     

一类非线性系统的变结构控制问题

本文研究了简约型非线性控制系统的变结构控制问题,针对变结构控制切换函数的确定问题进行了深入研究,给出了一类非线性系统切换函数的确定方法。研究结果表明,该方法适用于一类难于或不能可控正则化和线性化的非线性控制系统的综合。最后通过仿真证实了该方法的有效性。