三角嵌铺粒子追踪算法的三维化扩展

针对连续帧三维流场粒子的匹配问题,对基于三角嵌铺的粒子追踪算法进行了三维化扩展并将其命名为3DT PTV。3DT PTV遵循从粒子样型匹配到粒子匹配的原则,即粒子匹配结果从粒子样型匹配结果中总结。首先通过自定义"粒子样型DT网格"实现了粒子样型匹配的参数无依赖性,使3DT PTV适用于粒子非均匀分布流场;其次通过自定义"样型唯一性标识向量"进行粒子样型匹配;最终通过"双向计算-概率择优"模块对样型匹配结果进行样本扩展并整合出粒子匹配。通过添加自定义干扰的JPIV人工流场对3DT PTV进行了检验。除了算法本身的简洁性,结果亦证明了3DT PTV处理粒子无匹配率较高的复杂流动的良好特性。     

Inner wrinkling control in hydrodynamic deep drawing of an irregular surface part using drawbeads

Inner wrinkling phenomenon is more likely to develop during hydrodynamic deep drawing （HDD） of complicated component-forms due to the higher demand for controlling deformation sequences. Aiming at the problems in control of inner wrinkling for an irregular surface part featured with both concavity and convex, this research proposes an optimal design method of drawbead parameters to change the material flow. According to theoretical analysis of the mechanism of inner wrinkling, optimizing cavity pressure only is unreasonable to form a wrinkle-free deep-drawn part, so semi-circular drawbeads are employed. The effects of layout and height of drawbeads on forming results are discussed, and a process window is established based on evaluation indicators including the anti-wrinkle coefficient and the minimum wall thickness. Experiments are carried out to validate the process window, and the wall thickness and the wrinkle height are measured and compared with numerical findings. The results show that the anti-wrinkle ability of drawbeads weakens with increasing oblique angle and distance from the die center, while the wall thickness increases with increasing oblique angle and distance, and the inner wrinkling can be completely suppressed by drawbeads arranged in zones I and II with optimum penetration.     

非对称超声速来流下矩形转圆隔离段研究

为了适应超燃冲压发动机模块化设计及圆形燃烧室的需求,隔离段必须设计成矩形截面渐变为圆形出口的形状。发展了一种基于超椭圆曲线的截面渐变方法,以此设计了矩形转圆隔离段,开展了数值模拟研究并进行了在Ma=2.1且来流条件非对称下的矩形转圆隔离段吹风实验。研究结果表明:在反压相同时,两种不同来流条件下矩形转圆隔离段的出口总压恢复系数较等直矩形隔离段分别提高了4%和5%;在非对称来流实验条件下,矩形转圆隔离段壁面沿程压力分布规律与等直矩形隔离段压力分布规律趋势一致,上壁面沿程压力曲线前部呈波动式上升,后半部上升平缓,而下壁面沿程压力曲线整体上升较为平缓,随着出口反压的增大,总压恢复系数随之减小,矩形转圆隔离段最大能够承受4.1倍的来流静压,极限反压状态下出口总压恢复系数为0.505。     

民用飞机试飞规划与管理技术研究

梳理了通用的民机试飞需求类型,讨论了民机试飞任务分工和试飞计划制订原则,分析了民机试飞科目特点和逻辑关系,研究并提出了一种民机试飞任务优化方法,系统地阐述了试飞规划与管理体系,实现了民机试飞的闭环控制,解决了国内试飞规划中未能系统研究的问题,并创建了一套具有国际先进水平的民机试飞规划与管理系统(Flight Test Control System,简称"FTCS")。FTCS已在实际型号试飞工作中得到了验证和应用,起到了减少试飞架次和提高试飞效率的作用,具有实际的工程应用意义。     

一种高精度航空结构多主体协作冲击定位方法

为了提高结构冲击载荷定位的精度和实时性,针对声发射和逆问题分析两类方法的优点和不足,结合多主体技术提出了一种高精度航空结构多主体协作冲击定位方法.两类冲击定位方法自主并行工作,通过黑板协作融合,彼此通信交互消息,参考优化定位结果,保证位置精度的同时提高了实时性.在大型航空铝板上的实验表明,该冲击载荷定位方法快速有效,具有很好的鲁棒性.     

基于单应视差的月面着陆区离面测量及平坦性分析

文章针对月球探测器的软着陆,提出了基于由平面诱导的单应视差的月面着陆区离面距离测量及平坦性分析方法.对于特征点分布不均匀情况,采用邻近特征点内插方法在全图强制性近似均匀选择点云作为兴趣点,用基于极线约束和单应约束融合的方法匹配纹理不丰富的兴趣点.使用由平面诱导的单应视差计算兴趣点的离面距离,以离面距离的最大值、绝对值的...     

型号标准化文件体系的建立与管理

概述型号标准化文件体系的内涵、特点、作用以及文件体系的组成,阐明型号标准化文件体系与企业标准体系以及型号文件系统的关系.介绍型号标准化文件体系的运行与管理.     

New Neural Network Response Surface Methods for Reliability Analysis

This article presents two new kinds of artificial neural network (ANN) response surface methods (RSMs): the ANN RSM based on early stopping technique (ANNRSM-1), and the ANN RSM based on regularization theory (ANNRSM-2). The following improvements are made to the conventional ANN RSM (ANNRSM-0): 1) by monitoring the validation error during the training process, ANNRSM-1 determines the early stopping point and the training stopping point, and the weight vector at the early stopping point, which corresponds to the ANN model with the optimal generalization, is finally returned as the training result; 2) according to the regularization theory, ANNRSM-2 modifies the conventional training performance function by adding to it the sum of squares of the network weights, so the network weights are forced to have smaller values while the training error decreases. Tests show that the performance of ANN RSM becomes much better due to the above-mentioned improvements: first, ANNRSM-1 and ANNRSM-2 approximate to the limit state function (LSF) more accurately than ANNRSM-0; second, the estimated failure probabilities given by ANNRSM-1 and ANNRSM-2 have smaller errors than that obtained by ANNRSM-0; third, compared with ANNRSM-0, ANNRSM-1 and ANNRSM-2 require much fewer data samples to achieve stable failure probability results.     

泄爆面积对连通容器预混气体泄爆影响的实验研究

在大小两个体积不等的球形容器和圆形管道组成的连通容器中,开展连通容器泄爆实验,研究连通容器等泄爆面积条件下的火焰传播和压力变化情况。结果表明：火焰从起爆容器加速传播到传爆容器,但由于容器的开口泄爆,火焰传播速率小于密闭爆炸的火焰传播速率;随泄爆面积的减小,连通容器的泄爆压力和压力上升速率均增加;连通容器爆炸受管道火焰加速和压力累积作用,在相同泄爆面积条件下,容器的最大泄爆压力和最大压力上升速率高于单个容器爆炸时的最大泄爆压力和最大压力上升速率,特别是当小容器为传爆容器时,差别更加明显,不能用单个容器的泄爆设计方法来指导连通容器的泄爆。     

增量成形研究进展

重点综述了新型增量成形技术中的4类典型成形工艺,即局部不均匀加载下板面内弯曲增量成形、单点增量成形、多点柔模成形、高速冷滚打成形就其成形原理、工艺、设备及研究现状等方面的研究成果,并提出了这类新型增量成形的研究方向.