Linux内核技术分析及升级

针对Linux操作系统强大、稳定的功能,分析了其内核的诸多技术特性,并介绍了Linux内核升级的方法、步骤和注意事项.     

双三角翼大迎角绕流的并行计算

本文在ＬＵ－ＳＧＳ方法求解可压缩Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程的串行程序基础上,发展了适合ＭＰＰ系统类型的并行计算机的并行算法程序,并针对双三角翼大迎角绕流问题,就不同的并行计算方法进行了对比研究,探讨了优化并行策略,提高计算效率和计算加速比等问题。     

感应同步器，光栅和磁栅兼容的数显表的研究

本文介绍了数显表在我国的发展概况,以及感应同步器,光栅和磁栅兼容的数显表的基本原理。     

含硼富燃燃气燃烧实验研究

为实现固冲发动机二次燃烧模型验证,结合固冲发动机工作条件,设计了一种带透明观察窗燃烧实验装置;营造了简单的燃烧环境,实现了燃烧过程掺混作用的弱化;借助高速摄像进行了以空气速度作为单一变量的含硼富燃燃气燃烧可视化测量,获得了火焰形态结构;采用高速数据采集,获得了燃烧室压力;将实验数据与数值模拟结果进行了对比和分析。结果表明,燃气与空气速度相近时,火焰呈锥角结构,硼粒子的点火距离较长;燃气与空气速度差较小时,同一位置燃烧室压力较大;燃气与空气速度近似程度决定火焰的形态;数值模拟结果与实验结果基本吻合。     

Experimental study of a flush wall scramjet combustor equipped with strut/wall fuel injection

In this study a flush wall scramjet combustor is tested in a supersonic incoming air flow with the Mach number of 3 which is generated by an air vitiation heater producing the stagnation temperature of 1505 K. Using liquid kerosene as the fuel, the flame is stabilized by means of a centrally mounted O₂ pilot strut after being ignited by a plasma torch. During experimental measurements, the fuel is injected with a constant equivalence ratio of 0.8 according to specified strut/wall injection ratios, i.e., a portion of the fuel amount is injected from the strut while the rest is injected from the wall. The strut and wall injectors are arranged at the same axial position. The combustion performance and wall temperature gradients are evaluated with various fuel feeding ratios between the wall and the strut. Experimental results show, when the equivalence ratio is constant and the axial injection position is fixed, the combustion characteristics vary significantly with the strut/wall fuel feeding ratio, especially when this ratio is close to its lowest and highest limits. Among the four fuel feeding ratios examined, the strut only injection mode and the average distributed strut/wall injection mode show the best combustion performance. However, the strut/wall injection mode produces a smaller wall temperature gradient compared to the strut only injection mode, which is due to the significant film cooling effect caused by the wall injected liquid kerosene.     

星球巡视器任务规划技术发展综述

首先阐述了星球巡视器任务规划的定义、内容和特点,并分别从任务规划算法、全局路径规划算法、局部路径规划算法三个层面对国内外星球巡视器任务规划技术的研究现状进行了分析和评述。在任务规划层面,当前研究主要集中在基于资源调度的方法和基于路径的方法;在全局路径规划层面,介绍了路径图法、单元分解法等几何模型构建算法以及A*类算法等图搜索算法;在局部路径规划层面,介绍了人工势场法、Bug类算法、启发式动态重规划算法、基于地形评估的算法等几类常用算法。最后,对星球巡视器任务规划技术的未来发展方向进行了展望。     

航空发动机制造仿真数据管理集成应用系统实现

基于航发集团工程数据中心协同、共享环境,结合航空发动机制造仿真业务特点和需求,构建了制造仿真数据管理集成应用系统,涵盖了制造仿真结果数据管理、仿真数据定义和管理、仿真资源库管理、数据协同等方面的业务功能,面向航空发动机制造仿真数据的统一管理、协同共享进行了有益的探索。     

连续尺度变换方程在稳态及非稳态流动模拟中的应用

为了提高涡粘性假设的湍流模型对于非稳态流动的求解精度,同时兼顾其对于稳态流动的求解性能,将雷诺应力项与连续变换方程(CSSE)结合而形成新的应力项,使其根据流场尺度、网格尺度及Kolmogorov尺度来自动调节当地的应力雷诺应力模化水平,避免网格因素在流场模拟中产生不利影响,改正了混合RANS/LES方法的速度型偏离对数率问题;同时,该方法并未引入显式亚格子模型(SGS),因此回避了亚格子系数确定对于流场模拟精度产生的影响,改善了湍流模型对于流动不稳定性的辨识精度。在湍流平板算例中,CSSE方法计算的边界层速度型精度与雷诺平均方法(RANS)相当,而对于圆柱尾迹的模拟则证明了CSSE方法具有混合RANS/LES方法的优点,即能够准确模拟流动的不稳定性特征。     

Coupling damage and reliability model of low-cycle fatigue and high energy impact based on the local stress–strain approach

Fatigue induced products generally bear fatigue loads accompanied by impact processes,which reduces their reliable life rapidly. This paper introduces a reliability assessment model based on a local stress–strain approach considering both low-cycle fatigue and high energy impact loads.Two coupling relationships between fatigue and impact are given with effects of an impact process on fatigue damage and effects of fatigue damage on impact performance. The analysis of the former modifies the fatigue parameters and the Manson–Coffin equation for fatigue life based on material theories. On the other hand, the latter proposes the coupling variables and the difference of fracture toughness caused by accumulative fatigue damage. To form an overall reliability model including both fatigue failure and impact failure, a competing risk model is developed. A case study of an actuator cylinder is given to validate this method.     

Determination of thermal expansion coefficients for unidirectional fiber-reinforced composites

In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.